3" 1 HP Submersible Well Pump Complete Set Incl Motor, Pump-end and Control Box. 280ft Maxhead, Rated 10gpm, 14gpm Max. 1-phase 230v, 60Hz, 3420 rpm, 1 Year Warranty, (TH3-010-18).

I purchased this almost a year ago and I had power brownout that didnt blow the fuse. I suggest purchasing a spare start capacitor for this, so that you don't have to be without water for 3 weeks waiting for another to arrive from China. ( ya...been there!) Most of them that I found cost under $15. Now i have 2 spares on the shelf for the future. The pump runs fine at 80 ft lift with a 30/50 switch. I did notice that when it switches on it has a lot of immediate torque, so I installed a rubber collar just above the pump to prevent it from hitting the side of the shaft or twisting. It comes with a nice long lead of insulated conductor. Great for small diameter well shafts. Mine is a 4" inner diameter.

Works well. Im impressed. Cant complain.

Very happy with my pump I ordered granted I had issues with wiring it but I called the company and got an actual person who stayed on the phone with me for a good while walking me through what I needed to do he was very helpful and knowledgeable and I will definitely buy from them again and will recommend them to my friends

The tolerances on this pump are way to tight to be used in a 3" pipe. My well pipe has faint mineral build up and this pump wont sink 3 feet much less the 22 feet to the water mark. Don't use this without a 4" well pipe or bigger.

I bought this 3 inch diameter pump because the 4 inch well pipe was old caked and crusty.. a 4 inch pump would not go back down. This 3 inch pump went all the way down 80 ft with no problems. Good water pressure too.

Water well pump working just fine so far

Pump works great easy to install

Pump worked for less than a week. Had it pulled from well and tested by a pro and pump was no good. Junk!