Noulei Silk PLA 3D Printer Filament 1.75mm, 500g Shiny Printing Materials Silver

First silk pla I've used on my anycubic chiron and as it's my first i have nothing to compare with to be honest, But what's there to compare to the quality of the print was second to none with very little stringing and a few marks on the print but that is purely down to the settings which need a slight tweek as the parts wear over time, As for breaks and snapping mid print absolutely a big fat zero on that one not had any of that stress and as some of my prints have been over 40 hours there is nothing more disheartening than when the filament snaps after the bloody break sensor and you check the printer the next morning and it's printing nothing above the print ad it hasn't registered the breakThe filament was as dry as you'll ever get it out the box with it vac sealed tightly and not leaking when sealed like some have that I've recieved and also came with the obligatory silica gel bag to keep the filament as dry as you'll ever get it from the factoryAs for other brands of silk pla I've had such good success with this one there is no need to find another brand, Don't fix it if it ain't broke as the saying goes, As long as they supply the filament at this quality and can consistently supply it at this quality, I'll be more than happy to stick with theseAnd that shine off the print in different light angles!!!! 👌👍

Adheres well, looks great but careful what you print. I printed some spiral Christmas decorations and it did string quite badly. You may have to play about with your retraction settings quite a bit to improve it.

Great filament quality. It got the a Silk Gold. Prints great at 200-210, at 50mm. A bit yellow to begin with, but give it a coat of black shoe polish, then buff it with a cloth, makes it look a lot more metallic.

TBH I was a bit concerned about using something like this but it has actually turned out to be the best material that I have used so far. Sticks to the bed like egg yolk to a witney and prints perfectly.

This stuff is brilliant on my Ender 3 - first layer adhesion is excellent and it just goes without any problems. Nice shiny finish and seems quite tough.

I like the colour, other than that, this was the worst experience I've had with filament so far.It makes worrying popping sounds as it prints.It was stretchy after printing, and would crumble.I was required to use Pritt Stick to get it to adhere to the bed, however, even after letting it cool, it was way too difficult to remove. I let it cool for around 8hrs. (I know this sounds excessive, but I just didn't have the strength to remove it)By the time I got the print off of the bed, I no longer had a pretty good level, it was now so bad, I would have to re-level the bed. I am so very annoyed with this.This has been a terrible experience, now I have to spend the next couple of days trying to get that bed leveling sweet spot again. :(I suggest you not waste your time or money on this stuff, I had the Iron Gray 500g.

Is a solid blue , always prints lovely 210/60 ender 3v2

Came out really well on the prints I'm doing215 / 70 for me on my CR10s Pro V2Cracking Colour, has a real Tarnished look to it, rather than shiny new Gold

Habe mir das Filament schon in einigen Farben gekauft da ich sehr überzeugt davon bin. Diese Rezension bezieht sich auf folgende getestete Farben:„Silk Antique Gold“, „Silk Gold“, „Silk Jade Green“, „Silk Silver“ und 2x Silk Gold.Alle Rollen kamen trocken und ordentlich auf der Spule gewickelt an.Und zwar benutze ich einen Anycubic Chiron Drucker und habe mir dazu das Noulei Shiny PLA Filament in der Farbe „Silk Purple“. Mit 190°C Düsentemperatur und 50°C Betttemperatur konnte ich die besten Ergebnisse erreichen.Pros:sehr schöne Farben, die sehr hochwertig aussehen und unter Lichteinfall glänzensehr gute Layerhaftungstinkt nicht beim Druckensehr gute QualitätCons:Überhänge drucken funktioniert nicht so gut, deswegen muss man öfters Stützen mitdrucken.,Und bei breitflächigen Drucken kann es vorkommen, dass sich eine Ecke nach oben verzieht. Da kann man aber ganz einfach mit einem Klebestift Abhilfe schaffen. Es reicht wenn man damit einmal kurz über den Druckbereich drüberfährt und dann sollte es auch schon halten.Das Filament ist hauptsächlich für Dekorationen, da es bei Beanspruchung häufig recht schnell bricht.Fazit:Ich hatte bisher nie unlösbare Probleme damit und deswegen finde ich es schade, dass derzeit einige Farben nicht verfügbar sind. Deswegen kann ich auch alle Filamente dieser Marke an alle weiterempfehlen.

Todos los productos de esta marca son una maravilla

Buon filamento, colore bellissimo. Non lo userei per cose strutturali, rispetto ad altri filmenti meno carini a livello visivo ha molta meno adesione (ci ho stampato solo una volta quindi potrebbe anche essere che ho settato sbagliato la stampante).

Als PLA gekennzeichnet mit den üblichen Temperaturen.!!! Erst ab ca 230 C° ist das Egebnis perfekt !!!Liegt vermutlich an der Matten Materialmischung.

Good quality just find the sweet spot of the temperature and it works great