iKKEGOL OBD OBDII J1962 Male Connector to Open Plug Wire, OBD Diagnostic Extension Cable OBD2 Pigtail, DIY Mobley USB Adapter (30cm/12'')

Soft flexible feel to the cable, not like the hard plastic cheap stuff. Nice reusable ziplock storage bag. Haven't connected it up yet, just a great initial impression.

As many others have stated, the color coding chart is not correct. Suggest taking a VOM and COMPLETELY test all leads for correct pin number AND for any shorts in the plug head to any other pin! Note that the pins are dull, not shiny plated. That might add resistance to current flow. On my plug, two of the pins protruded higher that the others; that might make it difficult for other pins to achieve good electrical contact when mating with a female socket. For occasional use, like making a shorting plug to temporarily short Tc with CG, it's OK. Safer to use than a paper clip.

This connector is well made with plated pins and strain relief. I used an ohmeter to check the connectivity between each pin I needed and the stripped wire ends to be sure I got the correct connections. Stripping more insulation and soldering to the wires was easy. It's a nice connector for hooking up to my car... Fit the OBD2 plug securely. An upgrade and much better than the individual wires I was using before. Glad I bought it.

Color key is incorrect. Wire gauge is extremely small. Two leads didn't have continuity with obd connector so it wouldn't function. Extremely low quality and not a value for the money. Look elsewhere.

Good

Wires are NOT connected to the pins as labeled; this caused me hours of frustration. You MUST continuity-check the wires one by one. Do NOT trust the diagram.

Don't let other reviewers scare you away about no wire pinout or diagrams. It literally took me about 30 seconds to use an ohmmeter to check continuity between the connector pins I needed to hook up and the colored wires they went with. Easy! I'll be buying more of these next time I make another bench harness for programming ECMs.

Good

Product was well made and sturdy but there is obviously no quality control check. WIres were not colour coded as show in the sales documentation.

Good quality thanks

The PIN diagram in the this listing is completely wrong! I used a multimeter to trace each wire and here is what I found, although yours may be different. 1 - brown 2 - brown/white 3 - purple 4 - orange 5 - light blue 6 - green 7 - black 8 - black/white 9 - red/white 10 - white 11 - yellow 12 - pink 13 - gray 14 - green/white 15 - blue 16 - red

This is absolute garbage. The pinout wires are incorrectly colored on this site. DO NOT RELY ON THE COLORS MENTIONED HERE! Test with a multimeter to ensure the actual pin - wire color. Additionally - there is no pinout sheet in the product package - so you have to refer back to this site - which is WRONG! Cable likely works (I haven't tested it - as I've spent the last 30mins noting which pin goes to which color wire) but what a dogs breakfast of misinformation. Total time waster.