BLEDS Precision Micro Flush Cutter Soft Wire Cutter Pliers Anti-Slip | Micro Cutter for Electronics, Aluminum, Jewelry Making, 3D Printing, Copper Wire, Cables, Floral

I received these cutters in exchange for an honest review. Amazon shipped them in a padded envelope instead of a box so the cutters came out of their clam shell container, but luckily there was no damage. I do a lot of 3d printing and DIY electronics, so these cutters are good for cutting filament and copper wires. I have used them to clean up and remove supports from my prints. Small enough to get into tight space and on the really little details, providing good control and flush cuts. They also seem to work well on detailed paper craft projects, which not all cutters can do. They're not rated for steel wire though, so be careful with any hard material or thicker gauge. copper Hopefully these will hold up over time, but even if they don't the price is affordable enough to just buy a new one if one ever wears out. The handle and spring tension are good too, very comfortable to use. When fully squeezed, everything is in alignment with no gaps and very sharp, so overall, I'm pretty happy.

These are good cutters. I use them for both 3D printed, resin and PLA, along with hobby plastics. They are sharp and have I nice angle to get into close sprues. They are constructed very well with more sturdy materials than I am used to getting at this price. The spring mechanism was perfect tension for my needs and handling was comfortable. Everything cut cleanly. ***Warning*** do not use on paperclips or hard metals. This was my mistake and it will damage these blades. These were delivered very quickly, standard packaging and are just as described in the listing. I am very pleased with these and will be purchasing again.

I use these cutters for 3D Printing... A lot. I've been using them for about 4 days now, and they are holding up really well to the abuse I put them through. Pros: VERY sharp... Be careful. The points of these cutters are very narrow, which allows me to get into very small spaces to trim parts, and that makes my life easier. The handle has some contour to it, and they are more comfortable then most other cutters I've used. The price. Very reasonable price. I will be ordering more of these for sure. Cons: None yet! I will update my review if something happens. Conclusion: Order these. They are inexpensive, very sharp, very narrow, and comfortable to use. If you're like me and use this type of cutter often, then you know those are the most important things in a cutter.

The BS-8109 Wire Cutter Pliers by BLEDS is surprisingly well-made for the price. I didn't expect much from them, but they did exceed my expectations. For testing, I set up various projects and used the wire cutters over the course of a week. I first used the flush cutters to trim standard nylon zip-ties while redoing the cable management on my desktop. The flush cutters were able to trim off the excess strap close to the head so that no sharp edges protrude. The cutter is small enough that I didn't have to worry about my cables accidentally falling into the path of the blades and being cut by mistake, but large enough to easily trim the thicker cable ties I used. The size and angles of the cutter was also perfect for when I trimmed the zip ties in my 3D printer, where I had less space to work with. The second test was on a series of over 300 soldered leads across a few electronics projects of mine. I did have to squeeze the handle of the cutter a bit more than I did with the cable ties, but that is to be expected when cutting through metal versus cutting through nylon. I did begin to notice my hand cramping after about a third of the way through, but it was a lot of work all at once, and I am happy to report that the cutters were able to trim the leads incredibly close to the PCB. There is also no visible wear on the blades as I expected there would be, but I do feel like they would wear in time. This test showed that the blades on the BLEDS flush cutter are pretty durable, but the product could use a more ergonomic handle design to reduce hand cramping. Finally, I used the cutter for 3D printing. As I mentioned previously, I did snip the zip ties of my printer, which is now more professional looking, but I found the cutters to be equally as useful for other tasks when 3D printing. For instance, trimming previously heated ends of PLA and ABS filament is easy and leaves a precise cut, ensuring easier filament loading and extrusion. The flush cutters came in handy when dealing with the supports for uncured resin prints, allowing me to safely remove the supports without damaging the more delicate parts like I could have if I ripped the supports off with my hands. I also used the cutters to help remove a very stuck support on one of my PLA prints. Although I did still struggle with getting that support fully off, the BLEDS flush cutter was able to get in between the print and support and safely separated the two without damaging the surface of the print. Overall, my week of testing has shown the BS-8109 Wire Cutter Pliers by BLEDS to be really good for the price. They could use a better grip and I do feel they will wear with continued usage, but I was pleasantly surprised with how well they handled what I threw at them. Worth picking up if you are in need of an affordable flush cutter.

I run nine 3d printers in a hobbyist shop where we train others on 3d printing. These flush cutter work great, smooth action, clean cuts. The main use for us is to cut the supports off of 3d prints. The value was so good, I picked up the 5 pack after receiving the first pair. Honestly, they are so valued in the shop, we can not keep them in the tool drawer/storage bins, They are always out on the work benches in use. These are one of the most popular tools in the shop.

Received the cutters and decided to run them through a variety of things to see how they work. They will be mainly used in 3d printing area. Cut through filament like butter just as you would expect them too. I tried various scraps of wire I have laying around and they cut cleanly and easily. I feel the handles could be a little rounder for comfort but they are not bad at all to use. Good match up on the cutting edges and nice firm spring for tension. All and all a nice pair of cutters for the price

I will start by saying I was reimbursed for the cost of the clippers, which does not taint my review. Overall I'm very happy with these clippers. They have worked very nicely for everything I have used them for. Have trimmed and clipped lots of wire while building a 3D printer as well as clipped thin pieces of metal and trimmed plastic while working on scale models, and the clippers have done it all very nicely with no problems. Everything was cut very cleanly, leaving a nice finish cut. Trimming plastic parts for a model yielded a nice surface that just required some light sanding to finish clean up. These appear to be very similar to clippers available at a certain hobby/craft store that I will refrain from naming (Hobby Lobby), they work as well, or better, and are cheaper. I would definitely recommend these clippers.

I have a few 3D printers so I use these little wire snips all the time. The thing I like the most about this brand over a lot of the cheapies is that it is spring tensioned rather than using the little tension bar... over all these are more robust, the jaws are a little bigger as well as the Metal used is a little thicker. The blue ones in the pic came with my printer and the handle grips slip off the red grips seem to be molded on much better so I don’t see that being an issue with these. Over all I am satisfied with the product and don’t see any downside to them.

An sich machte es einen guten Eindruck, aber leider hat es nicht mal ein jahr gehalten, bei relativ seltenem gebrauch. Vielleicht auch nur montagsprodukt erhalten 🤷🏻‍♂️

Using it mostly for prints made with resin printer. Works flawlessly, I use it after cleaning the prints with IPA - which you should do too other pliers get with resin everywhere and it's getting messy.

Do not attempt to cut G.I. wires. As it will surely break it. Will not cut even the 14 AWG. So be cautious on what you are cutting. This will only be good for cutting small plastic zip ties.

Good quality for reasonable price

These are great the feel good in my hand. They cut really well and so far they have done the job.