Jumbl SINSB7W ProGrip Ultra Stainless Steel Speaker Wall Mount Bracket White, Pair of 2 - Thread Size: 1/4-20 - Holds up to 10 Lbs

I rarely write reviews, but I just have to for the Jumbl SINSB7B ProGrip Ultra. From the moment I unpacked them, I could tell these mounts were built to last. The stainless steel feels solid, and installing my speakers was surprisingly easy — no confusing instructions or flimsy parts. Once mounted, being able to adjust them just right made a huge difference. My sound now fills the room exactly how I want, and it just feels right. Sure, the hardware could be a bit stronger at extreme angles, but in everyday use, it’s rock‑solid. What really gets me is how much they improve my space — my home theater finally feels complete. These mounts are simple, dependable, and do exactly what they promise. Honestly, I’m just thrilled I found them.

I used these to mount a pair of Klipsch Surround 3s. One is mounted to drywall, using drywall anchors and the other is mounted to a load bearing support beam. I read other reviews before ordering and knew that these don't come with screws, bolts, anchors, etc. I didn't mind, since I knew I'd be using different mounting hardware for each side. Simple wood screws for one side, and drywall anchors and screws for the other. Super easy install with unobtrusive design. Yeah, the Jumbl emblems got scratched during shipping like other reviewers had mentioned. But I'm totally ok with that, because the mounts are small enough to be completely hidden by the speaker. I was planning on painting these mounts to match my wall, but after installing and mounting the speakers, I realized it would be pointless to paint them. I can't see the mount at all, let alone the scratched Jumbl logo. These are great little mounts and I won't hesitate to purchase another set, should the need arise.

I bought these to replace the hardware that came with my Polk speakers. They had a curious 'L' shape to them which did not hold or fit the space I'm using the speakers. Was worried that they might not thread into the speakers, but they fit fine. The speakers are pretty small and the mounts supported them very well. I was impressed that the hardware was much bigger than the Polk system that it replaced. It is very substantial and had no problem holding my speakers at an angle. Others complain that there is no mounting hardware (meaning screws and anchors) but that wasn't a problem for me. I think the only complaint I might have is that the packaging was very poor.

Nice and sturdy, does what it says and is pretty unobtrusive. Depending on where you’re mounting the speaker and how big the speaker is, this bracket might essentially disappear behind the speaker. The only caution I’ll give is that depending on how close you’re trying to mount your speaker to the ceiling or an adjoining wall or your woodwork/trim you’ll want to make sure you have adequate access to the allen screw that locks the “ball” in place before you drill any holes in the wall. Personally I’d like to see this come with different lengths for the screws that attach the speaker to the mount, in case you’re mounting a rear-ported speaker and you’re trying to get more distance from the wall for improved bass clarity. But that would drive the cost up, and that’s not really what these are for. You’re probably not gonna mount your fronts with these if they’re large speakers. These are really intended for small light weight surrounds where you want it pretty close to the wall. If you’re looking to secure a set of speakers where you think you might want to play around with adjusting the angle and the distance from the wall these aren’t the mounts you want. This is definitely more of a set it once and forget it kind of design. But for that purpose they’re affordable, solidly built, and very secure.

Needed some mount for my new outdoor speakers and was looking for something flexible and cheap. These work great and hold my kicker speakers no problem. There 6 lbs so not very heavy and these mounts could hd something twice as heavy. Very flexible and can tilt and turn the speakers a fair amount before the speaker hits the wall. If using with smaller speaker you could do 180 degrees no problem. Super easy to install and adjust with an Allen wrench. Only negative is they don't come with hardware to mount to the wall. I understand this as there so many different pieces of hardware they would have to provide to install into all the different types of walls. I used some structural wood screws to mount them through my aluminum siding into the studs. Worked great

I was a little nervous about getting these due to some reviews mentioning items arriving damaged, as well as some complaints about installation. I had zero issues installing these. I mounted my vintage NHT Super Zero XU speakers (5.2 pounds each) with these. These speakers have the rear threaded mounting hole (as opposed to a keystone hole), so I easily threaded the ball onto each one (with thread lock) and then tightened the nut. I had no issues tightening the clamp, loosening it enough for repositioning the speaker, then performing a final tightening. The mounts are very secure and have almost no sag with these speakers. I suspect that these would work with a 10 pound speaker, but you probably would experience some noticeable sag. However, you could probably compensate by aiming the speaker a little higher before your final tightening of the clamp. Note - these mounts do not come with screws for mounting them to the wall. You will need two appropriately sized fasteners of the appropriate type for your wall to attach each mount to the wall.

These would have been a five out of five but much like other reviews, while these wall mount brackets are great, after two shipments and having all four come in scratched, I finally just kept the best looking two and returned the other two. It's quite apparent that these could use a little bit more packing material to keep the studs from scratching the nice powder coat on the bracket

Nice sturdy mount for speakers. Easy to install and adjust after mounting. Well made.

Los utilicé para las bocinas surround Polk Audio OWM3 Sin problema las sostiene en el ángulo que se desee Su color blanco es perfecto para una instalación discreta y elegante

The product is to replace my existing Bose Jewel Cube mounts. The thread size does not match but one can open up the Jewel speaker and remove the screw fitting. With an additional nut, this Pro-Grip can be fitted well. The design of this mount is sturdy and brilliant. Intending to purchase more.

Très solide rtd facile à bn utilser. Très bien.

Didn't fit my keyhole speaker fixings. Returned and received a refund.

当方の住まいに合うのは、これしかなく、仕様、機能、デザインは満足れべるだが、新品と言いながら、2つとも傷があった。返品の時間がなく諦めたが、ここは不満足。箱も破れており、梱包方法に課題があると思われる。