NEEBIRGELIA Black Metal Bed Frame Queen Size with Headboard and Footboard Single Platform Mattress Base,Metal Tube and Iron-Art Bed（Queen,Black）

I assembled it by myself. It took me about 2.5 hours to assemble it. The instructions are imprecise. Step 5 is for pieces k, b, and bars labeled 7. The directions don’t tell you this. I used the process of elimination to figure it out. Lol. I ended up measuring my mattress because the flanges k are curved and the instructions do not indicate which direction they should face when attaching them to the frame. While measuring I determined that my mattress is wider than the distance between the brackets if I chose to install them curving inward and that there is a heavy steel wire support that runs around the inside of the bottom edge of the mattress. If I installed them facing inward the edges of the mattress would rip or tear over time; so I decided to reverse them so they curved outward. The washers are not flat as the directions indicate; they are curved. I chose to have them curve around the frame, but if they loosen I will probably reverse them. The dimples or screw holes they cover are very deep and curved in the opposite direction from the frame, so the washers could also be reversed to face the other direction. A couple of the screws had thread issues. I had to run them in and out of the bolt pieces for the headboard a few times to get them to work properly. I also cut the foam tape to fit around the screws in the center of the frame so if I ever need to remove them it will be easy to do so. I drove to Home Depot and purchased a length of pipe insulation for 1” pipe. I cut it to 12.5” and used it to cover the legs in the center of the sides of the bed frame so I won’t stub my toes again. I stubbed them twice assembling it. It was only about $3.00 for the piece of pipe insulation. (I added pictures to show how it looks now. They uploaded in the wrong order.) I also ordered a rug gripper on Amazon to put under the mattress so it doesn’t slide around. I selected the 4’ x 6’ size so it doesn’t show around the edges of the mattress. I plan to wrap the edges of it around the slats and adhere it to itself with clear packing tape. I don’t want tape glue stuck to the frame. Lol I ordered the silver gray color. I was really hoping it would be silver paint with grey spatter. But it’s not silver at all. It’s dark grey almost black with light grey splatter. I’m disappointed in the color, but I don’t plan to return it. I am so tired of the fake bronze/brown color and black. Black is such a boring color. The white doesn’t look pretty to me too. It looks like it’s just a flat color in the pictures like the black paint. So this was really the only option. I would have been delighted to have found a blue or maybe a green verdigris color, but the colors are limited. I searched on Amazon and the internet for several hours trying to find a different color. I was really hoping to find a brass, bronze, or chrome plated frame. Metal frames always have to be painted after a few years anyway so it would be nice if a bed frame started out prettier to begin with. Overall I am very happy with the purchase. The bed frame seems nice and sturdy. It was easy to put together even though it was time consuming. It hasn’t creaked or squeaked. It’s been a long time since I’ve had a bed frame. It’s quite a splurge for me with my tight budget.

Exceeded my expectations!! Quality. Easy assembly. Very sturdy. Great bed for my 11yr old. I might just sleep in there tonight lol

Not hard to assemble. Sturdy. Pretty. Only problem I noticed was the black bolts. Not too noticeable but would be better if nickel or white. Stand out on the white paint.

We needed a bed frame for mattress without a box spring. Looked at several and this one seem to have the features I wanted to see in a frame. I'm an engineer, so I know what to look for. As others have said in their reviews, don't tighten everything right away so you can have a bit of wiggle room to get it together. The pieces have welded flanges where they bolt into other pieces and welding tends to warp metal. In this case, not a ton of warping to cause an issue, but the tightening advice is warranted. I liked the number of support slats for the mattress and middle vertical legs, though I would have liked to see the vertical legs tied together near the floor....nothing I can't fix myself if needed. Speaking of which, I'm glad all the joints are essentially square so I can add supporting brackets in the future as wear and tear kicks in. I chose to not use the optional brackets to help hold the mattress in place as I think they will just tear the mattress. Another reviewer suggested those rubberized kitchen drawer liners. That sounds appropriate and I will be using those. There were a few scuffs on the paint as I removed everything from the box, but given it came from China, not really surprised and not really a deal breaker either as they were minor. The flanges weren't fully welded, but it looked as designed, so it wasn't a manufacturing flaw. That said, I can see where the potential failure points are. Overall, it's a good frame for the price. It's going into a spare bedroom with occasional gentle use, so it should serve it's purpose.

Easy to put together and is just beautiful in person!

Purchased this bed on a whim because it was the only one that would get here with next day shipping and had good reviews. It arrived with very minor cosmetic damage, but it was on the back of the headboard so it was not a big deal. Assembly took me just under an hour but would go MUCH quicker if you had two people. The instructions were great, however it does leave a piece out of the diagram, but you’re able to figure it out pretty easily. I opted to not install the slide protectors as I’ve read that those can dig into your mattress. First night impressions: it’s seems very sturdy and there’s no squeaking. That said, it isn’t very heavy, and I found that if no one is on the bed it does slide around when pushed. I would recommend getting furniture grips to prevent this.

I’ve had this bed for 4 years and love it! It’s classic, cute, well made. It’s an amazing price for a high quality bed and it’s been great. I had a recent move and unfortunately after disassembling the bed, the screws and attachments were lost in the move. I contacted the company and they sent me a whole new set of the attachments and screws for it - free! I was really impressed with their customer service. Would definitely purchase from them again.

It’s sturdy, feels well-made once assembled, and didn’t take much time or effort to put together. The instructions were clear, and all the parts fit like they should. There were a few minor dings and scratches here and there out of the box, but nothing serious enough to return it over. Once it's set up, they’re barely noticeable. Overall, I’m happy with the purchase and would recommend it for anyone looking for a reliable, easy-to-build bed frame.