ECHOGEAR TV Cord Hider for Wall Mounted TV - Cable Management Kit Hides TV Wires - Includes 2 Pass Throughs, Locking Brackets, and Hole Saw Drill Attachment (Black)

Ever feel like your TV cords are staging a hostile takeover of your living room? Yeah, me too. That's where the cord hider swoops in like a superhero (minus the cape). This little kit is like magic for messy cords, making your wall look sleek and tidy in no time. Here's the deal: • Installation? Easy peasy. You don't need a degree in engineering, just a drill and 20 minutes of your precious time. Boom, cords banished behind the wall. • Bye-bye, cable spaghetti! This bad boy hides most of your TV cables (except the power-hungry ones, sorry). Think HDMI, Aux, even speaker wires - they're all outta sight, outta mind. • Need to adjust something? No problem! The handy pass-throughs let you add or remove cables whenever, keeping your entertainment setup flexible as ever. • Looks good, does good. This kit blends in seamlessly with our walls (bonus points for being paintable!) and is nice and small, so it doesn't add unnecessary bulk. Heads up: This hider isn't for power cables, and it might not be the best fit for a jungle of cords. But for most setups, it's works! Overall: It's easy to use, affordable, and makes your wall look like it belongs in a magazine. Just remember, it's not for every cable situation, but for most folks, it's a cord-cutting dream come true. So ditch the mess and embrace the clean with this little gem!

Fantastic!! So easy, so well designed. Incredibly simple instructions and fit my needs exactly. Extremely happy to have picked this version of all the ones out there and highly recommend.

Great product, comes with everything needed including a hole saw. Makes hiding HDMI cables for a tv or other non- power cables very easy. The cable hiders secure snuggly and look great as well. Echogear always provides great instructions and I enjoy the funny packaging and remarks in their documentation.

I finally decided to hide my cords after researching several brands of product. I decided on this one. The hole saw is great, but it’s only good for two holes. If you try to drill any more holes after that it just spins so you can tell it’s cheap. The base piece that goes in the wall fits nicely. You just have to look inside to ensure the wing pieces are folding up all the way as you screw to hold that in place then reach up in there and feel as well. The product seems pretty durable. It’s a little hard to run the cables through the middle piece. It’s not very pliable. I painted them to match my wall color that was one of the features I liked about this particular product was that it stated it was paintable. I will not try to put cables through until the paint is dry, but I had tested a couple while installing, and it was difficult to fit them through. The size is a nice size as it’s not overwhelming on the wall. This is a great kit to get the job done.

Easy to install. Functional. Looks good. I only had a few cables but you could easily pull 4-5 hdmi cables etc. It's good enough size for that.

Wow, this is seriously a great find. First of all — it comes with a drill bit that fits perfectly for installation. That alone saved me time and guesswork. Second — installation is super easy, and using it day-to-day is just as smooth. The outer cover is made of a rubbery plastic that doesn’t feel cheap at all — it’s actually pleasant to the touch and really practical to work with. Honestly, I’m just glad I found this. Makes cable management way less annoying and actually kind of satisfying.

Simplicity and functionality, my 2 favorite things. The included hole blade did a really clean cut. My suggestion would be to run your cabling through the provided rubber cover before setting in the housing. I was able, with some effort, to get my extension cord through the slit which was excellent. I did however feed my Ethernet cable through the housing but forgot to go through the cover before fishing it up (dropped a cable and twist tied to pull up). Because it’s coming from a really long run already fished through some other walls I was not about to take the extra 15m to send it back down for a re-do (already had the cover set in the top housing section). It’s a thin cable to i ran it jenkily out the side, which works for me as it will be well covered from view. Reasoning behind running cables through before setting in housing is, as you will see when you take it off the first time during installation, is it’s 3 prongs that hold it in are rather secure. I’m sure someone could manage to get it off after set, but with 2 cables inside and in the way, I did not want to try to undo the rubber while it was secured to the wall and I was too lazy to unscrew and take the housing out. Works well. Simple, easy to install. 5/5 for the price. (I used a stud finder with a voltage detector to ensure no risk of hitting wiring in this old house, always a good practice)

I originally had made some small holes in my wall for my HDMI TV cables, but it looked very unfinished, and messy. I found these covers online to clean things up. I was not disappointed! I liked how easy it was to install these wall covers. The instructions were clear, funny, and easy to follow. I was a little worried about drilling more holes into my wall, but the included drill bit made it very simple. I was even able to drill over the existing holes no problem. It took me about 15-30 minutes to add the covers, and it looks great! The only difficult thing I found was getting the drywall out of the bit, but there are some holes on the sides to dig it out. Just takes some time. Very inexpensive and easy process overall. Recommended!

Quick fix for those wires to be hidden. Only thing is this set doesn't comes with the catch line which I had to find my own. Other than that its all good 👍🏼. Highly recommended.

Hole saw broke on first hole, so hand did the other hole.

Good

Es una maravilla, yo que no sé de taladros y perforaciones, me fue facilísimo hacerlo y rápido de poner! :)

Bought the two Amazon items ECHOGEAR TV Cord Hider (2 passthrough - 1 set, 4 passthrough - 2 set) for Wall Mounted TV's. The single pair comes with a 3 inch hole saw, the double package of 2 sets comes with a single 3 inch hole saw. Some mention that the hole saw slips and does a rough cut, the solution there is quite easy in using an allen key to loosen the includes shank bolt holding the hole saw and tighten it back on the flat portion of the shaft. It should be good out of the box however after reading some reviews i readjusted that allen key bolt to ensure it was seated properly. Install is easy as can be, use a stud finder to ensure no studs are on that portion for the hole itself and that no electrical is present as well. Most stud finders will solve both issues, you want to ensure the location is right. Then use the drill and hole saw to cut the 3 inch diameter hole. You then fish a fish tape or wire down/up the wall from hole to hole, using this pull wire to pull in your miscellaneous cables. One item to remember is that you will likely require additional lengths on the cables, i suggest 15 feet lengths for the HDMI and other cables. Many of us are sitting with 8 - 10 foot lengths, you will find that is likely short and you will need 12 - 15 feet...so go with 15 feet. It is recommended for low voltage cables and the power cable on your TV is usually a C7 (polarized, non polarized) similar to a laptop power cable, you can run a 1/2 inch corrugated conduit in the wall space to house that particular cable. I have seen pictures with the C7 power cable installed though the wall direct, in practise doesn't really make a difference however code is to only use a inside wall rated cable or to do the corrugated conduit. Once installed the look if exceptional, looks finished and no more unsightly cables. It takes about 20 - 30 minutes to complete the install, a few additional minutes to tie wrap the cables out of sight behind your TV stand. I added a couple of pictures of my first install, doing the other two installs later this week.