Xprite LED Turn Signal & Side Marker Lights Kits, Led Lights Compatible with 2007-2018 Jeep Wrangler JK & Wrangler Unlimited - Clear Lens

UPDATE-03/04/20-Xprite customer service emailed me again and offered to fix whatever the issue is, regardless of what I think about production of this particular product, Xprite's customer service and dedication to keeping their customers happiness is out of the park. After talking to them via email, they went over and beyond making sure that I got new parts that work and as a result I ended up with a complete and brand new kit. Everything they sent me was in perfect condition and works exactly as it should. The installation is simple, especially the turn signals. The side/fender marker lights take a little more effort, do not be discouraged and pay attention to what you are doing. When it comes to sliding them in and out of the little pocket they go in to, it will help if you remove the plug from the fixture, just twist it counter clockwise and gently pull it out, not the wires, just the plug so it hangs. It will help if you feed the plug between the fender and through the hole first and slide the light fixture in right behind it. It's a tight fit but the fender is made of plastic and is pliable, you can pull on it pretty hard before it reaches its breaking point, make sure the locking tab doesn't bend over on the way in because it needs to slide just past the hole into it's own slot. The instructions are decent but take a real good look at what has to happen before doing it. If you have the side marker in but it's not getting down into the pocket that it goes in to, then more than likely that little locking tab has bent over and you will have to back it out a little, reach in with one set of fingers and bend it back while the other hand pulls really hard at separating the fender from the pocket fixture that the light fixture goes in to.This comment, obviously, is not for the mechanically inclined. This is for the person that is not. Last but not least, Xprite will help you with whatever you need. Like I've said, they will go over and beyond what it takes to make things right with you, that alone is worth every penny that you spend on these. THANKS XPRITE, YOU GUYS ARE GREAT!!!! I will submit photos soon....UPDATE!! 02/14/20-Once again.. One of them have died and no longer works, it does not flash or act as a running light. The replacements that they sent to me worked when I first got them although the led light board was not attached inside the cup. When you look through the access hole you could see that whomever assembled it did not bother to glue the reflector or the led board with the resistor to the housing before they glued the lens to the outside, This tells me that their slave labor is getting paid for however many they assemble because all they did was throw it in the box and count it as complete. This company needs QA, that stands for "Quality Assurance" A QA officer will go to the manufacturer and verify that there is a certain quality of standard behind their product. Until this happens they will never produce a quality product and I will stand by this, I am out a good chunk of money and my Rubicon is not legal to operate on US soil using this product. You can send me another left turn signal that works but that doesn't mean they produce quality stuff. What I want is my money back, this is the worst experience I've had on Amazon!!!!!UPDATE!! Their customer service is excellent, they replaced the defective parts with parts that work. They look good and work good. I will leave my previous review so you can see what happened and that they are paying attention and doing everything they can to remedy it. They mailed working parts to me immediately. I would buy them againI read a bunch of reviews and oh how they made new ones and they work perfectly...yeah, for one day, no not even 24 hours. I installed them, easily I'll give them that but less than 24 hours later the right side marker? dead, The turn signals are intermittent so it's a crapshot whether anyone in front of me will know if I'm turning or not how important is that with my 14 month old son in the back? I am only running LED headlight and they are excellent, LED in the cab gives the rubi light likes it's never known I need some answers. More often than not, they don't work. the only one that does is the left side marker. HelpWhy is it that someone in Oct of 2016 gets an updated set that now work perfectly and now myself in the year 2020 is getting a set that doesnt work, that is doing what the person in 2016 experienced.

This review is for the Xprite front turn signal and side marker lights that came in a dual package. The two sets of lights came in one package and I found nothing wrong with the manufacturing or packaging. The one drawback is that there are no instructions. While they are just lights, I did end up searching for a YouTube video on help with installing both sets of lights. The side markers will require that you remove the first two plastic pins holding the inner fender to the outer fender so you can create enough space to remove the old side marker and insert the new one. The lamp will need to be out from the old one to get it removed and the back harness will need to be removed to insert the new LED. There just physically isn't much clearance. Once you have done that you will need to find new plastic clips to hold the inner and outer fenders together. I just installed the lights today and will plan on going to the auto parts store tomorrow to find the clips that I need.As for the turn signals, they are much easier to install. I removed the wiring harness and lamp from the old assembly, then figured out which clips that held it in that needed to be held together to remove the old light assembly. Then the new LED assembly snaps in from the front of the grill and the wiring harness plugs right back in. Very simple, but I did it with poor lighting and didn't bother to grab a flashlight. A flashlight helps...you won't need any other tools though as it is rather simple. Maybe a screwdriver if you have a stubborn clip holding the lamp assembly in.Both lights work well and flash as they should. I had read other reviews of the LED's not being aligned the same per pair. This is not true with this kit and all of the diodes appear to be symmetrical. No flashing issues either. I tried them with both hazard lights on and blinkers on with the parking lights on and off. No issues and they look great. Can't really say they are that much brighter than stock, but they look cool and you know they are LED because you can see each diode lit up. So far so good....will see if they hold up to the road for a few months and report back.

I purchased the Smoked lens bundle for my 2013 Jeep Wrangler to replace the factory turn and side markers. The lights seem to be of good quality and are pretty bright (definitely more so than the stock). Installation of the turn signals is pretty straight forward and quite easy. The trick is to remove the front grill to have better access to popping out the factory turn signals. You CAN leave the grill on and pop the clips that hold the factory turn signals in using a flat head screwdriver to gently push one side in while popping the other clip out, but honestly its too easy to just take the grill off and be done with it.Its pretty much plug and play for both the turn signals and side markers when it comes to the wiring part. Installing the side markers is a little more involved but nothing that anyone cant do. Just be careful when installing the side markers and make sure you have the bottom clips installed first before snapping the top one in place. Also, be careful when snapping the top one in place as you CAN break it if you press too hard (ask me how i know)There are no instructions included on the install, but a quick youtube search yielded a video on installing the side markers courtesy of Xprite themselves. [...]The lights are bright, look really good off as much as they do on. For the price you cant beat it and its a quick cheap mod that adds a nice appearance and functionality to it.

The lights in them were not very bright at all including the halo and the clips on the back of the turn signals did not line up at all but you can get them to work but alot of work to make the clips lock in but they definitely look good in the dark

installed on both my 2012 and 2017 JK's, haven't failed yet on either of them

Looks great, easy install, recommend!!

Muy bonitos. Aún que me hubiera gustado que proyectaran más luz

Received intact and easy to install