Add Seal comprises of a carefully formulated blend of natural fibres, blocking agents and sealing compounds that's been proven to seal a puncture of up to and above 12mm. It can be used as a preventative measure for wide a range of wheelchair, mobility scooters and different tyre sizes etc..!Add Seal is pumped into the tyre through the valve stem. Once moving, centrifugal forces distribute the sealant evenly within the tread area of the tyre, which is where the majority of punctures occur. Add Seal works immediately and repeatedly for the life of the tyre saving time and money.Non Hazardous - Latex Free - Easy to Fit - Environmentally SafeTo Protect Tyres:It is necessary to totally deflate the tyre to fit the sealant. Ensure vehicle is on firm level ground and you have the means to re-inflate the tyre.Position the wheel so tyre valve stem is at 4 o'clock or 8 o'clock position. Avoid having valve at top of the wheel.Pull up plastic filler tube from top of cap.Twist & pull valve core remover tool from end of filler tube.Unscrew dust cap from tyre valve use valve core remover tool to unscrew valve core from inside valve stem.Place filler tube over valve stem. Squeeze correct amount of sealant into tyre. (see quantity requirement chart on bottle).Clear valve stem of sealant residue using an airline or cloth. Replace valve core, inflate tyre to correct pressure.To Repair a Puncture:If possible remove the puncturing object (if a screw, unscrew from tyre do not pull out)Process as described in steps 1-6 above, then drive for a short distance or spin the wheel manually to enable sealant to spread inside the tyre. Check air pressure.
Trustpilot
1 month ago
2 months ago
