elago M2 Phone Stand [Silver] - Premium Aluminum, Angled for Video Calls, Cable Management, Aluminum Phone Stand Compatible with iPhones, Galaxy, and Other Smartphones

Great iPhone 5 stand! It has worked better than I expected. I know it's just a stand, but it's great to have the phone always at a good viewing angle. It saves time from constantly picking it up off my desk to see it better. This would match an iMac perfectly but looks great with anything. The angle is perfect; better than the picture shows, I think. I can have both the lightning cable and wired headphones plugged into the bottom at the same time; they fit between the 2 pronged supports at the bottom if you shift the phone to the right a little. There is still enough of a lower left corner edge to hold the phone stable. If you only need to plug in the lightning cable, then it can stay centered. I have a slim Speck case on the phone, and there is plenty of room to sit the phone in this stand. You could have a thicker case and it would still work.There are foam pads that the phone rests on. I don't have concerns about scratching the back because I use a case. I don't think it would scratch the phone, but if you wanted, you could line the upright part with felt, etc. The bottom has two strips of foam to cushion it. It slides around on a laminate surface pretty easily if you try to press to click the home button. You could use some 3M strips to anchor it if you wanted. I usually just grasp the phone between my thumb and fingers and 'pinch' it to press the home button, which works fine. Due to how the 2 prongs stick out where the phone rests, I find that my normal 'unlock' fingerprint from my thumb is difficult to work, so I usually use a second stored fingerprint of the tip of my middle finger to unlock it. This is a minor inconvenience outweighed by the usefulness of the stand. I don't see a way around this. Once unlocked, you can easily touch the screen to open apps, dial the phone, etc., without moving the phone at all, and that has been very helpful. Overall, a great product. The company was very professional and courteous in their follow-ups to see if I liked it (I purchased it; I'm not a beta tester or anything). The packaging was great. I bought one for my dad after using mine for a couple weeks. Recommended.

I bought this stand for use at work, and have loved it. In fact, I liked it so much that for the first few weeks I had it at work, I brought it home on the weekend to use on my desk at home. I just ordered a second one for use at home, and have recommended it to others. It is solid and well made, with well-placed pads on the bottom and in the cradle where the iPhone rests. The pads on the bottom prevent it from slipping around, but allow desktop movement easily enough. The charging cord threads nicely through the larger of the two holes in the back and on my 4S, the charging connector centers the phone nicely in the stand. With the newer narrower cable for the iPhone 5, this may not be the case- I'll cross that road when I upgrade in a year or so. :-D The angle at which the phone sits is optimum for listening to music and texting or surfing or any other activity. There are holes in the portion of the cradle where the iPhone rests that correspond to the location of the speakers to allow sound to nicely bounce off of the desk surface giving a clean sound (well as clean as you could expect from such small speakers). Lastly, it is easy to pick the phone up and rotate it 90 degrees for landscape viewing of videos or use of other apps. Overall, a very well thought out design, worth the price, and aesthetically pleasing (cool!) to look at.

This is a solid, obviously well made product. It's done in a single cast with a great looking silver finish. No one else makes anything that looks as great as this. It's appeal is definitely in its simplicity and the fact that it looks great even when not in use. There are pads on the bottom to avoid scratching the surface it sits on as well as pads where the bottom of your phone and the stand touch. The only issue this stand might have is a lack of padding where the back of the phone touches the stand. I mention this in case you take your phone out of its case, or if you're gutsy enough not to use a case (and I know some people who don't). When I first received this I had to take my phone out of the case in order to make a good connection with my lightening cable, and I didn't like the sound I heard when the back of my iPhone touched or slid against the metal stand. I put a pad there myself (I used a clear circular stick-on bumper about a 1/4" wide made by 3m in case you want to do something similar) until I changed my cable/case setup. As a result, this is no longer an issue, though I think it would just be prudent for the company to either add a clear silicone bumper/pad themselves or include it in the package in case the consumer wants the extra buffer. But as you can see by the title of this review, I'd definitely buy it again over almost everything else. It looks great and I couldn't break it if I wanted to! I do wish it was a bit less expensive but I think that any reluctance I felt when ordering this, I forgot about when I received it.

これはiphone6のゴールドにバッチリ合います！ 充電の時下側のケーブルの部分に余裕があります。 値段は高めですが高級感たっぷり漂います。

Just as advertised, good quality will even hold an android tablet sideways.

シンプルでとても気に入っています。スマートフォンを横置きにすると、動画などを見るスタンドとしても機能するので、とても便利です。購入してよかったアイテムですね。

Etwas hat, zu sagen,entsprechend hergestellt,hat die Bestellung,die website ist ernst und schnell,ich empfehle es ohne ein Problem,befehle,in den 4 Tagen wirklich super anzukommen

I ordered this product because I needed a desk stand for my iPhone that would not look out of place next to my iMac. Well, it turns out it is perfect for more reasons than pure aesthetics! The construction is very solid and well thought out. Non-slip rubber feet in the bottom provide added stability. The stand's matte finish is both pleasing to the eye and practical (it is less slippery and a bare iPhone is less likely to get scratched). In the back, a couple of iMac-like speaker holes provide a means for cable management. The space between the two support arms is exactly the size of the Apple 30-pin connector so while the iPhone is charging, it is even more stable. Not having to remove the iPhone bumper or case every time I charge my iPhone is a relief. In fact, the depth of the support arms is approximately 15mm offering ample room for most normal size cases. Only very thick cases may not be accommodated. The stand's only disadvantage is probably the fact that it is not adjustable although that limitation makes the design simple and elegant. In any case, the angle of view is very comfortable both for desk as well as nightstand use. An excellent and very stylish product!