Seven Sparta 4 PCS Grill Led Lights with Fuse Adaptor Compatible with 2016-2023 Toyota Tacoma TRD Pro OEM Front Grille (Amber Light with Amber Shell)

Works as intended, looks great in a black Grille with the Smoked Lenes. Perfect size, nice and bright. Simple and easy installation. Take your time and they will look aewsome.

EDIT: I liked them so much that I decided to order the amber ones too. I spaced these out differently so I had to do some gentle grinding on each side of the clips to get it to snap in on the far ends of the grille. They look great both ways but I believe I prefer the amber spaced apart. The photos appear to make the white light brighter than the amber but in person that’s not the case, the amber is significantly brighter in the sunlight. 5 minute install, a true plug and play, came with everything needed. I hooked mine to the inj 10 fuse, turns on/off with the truck. During the sunlight, these are still easily visible, looks great with the DRL’s. At night they are really bright, can be easily seen even with bright xenon white LED headlamps on. Snapped into the TRD Pro grill great, but if you want to spread them out to the far ends, you will have to take a grinder to the grill or lights to make them fit, but that’s with all Raptor lights. They looked waterproof, but I did seal even more with some loctite sealant for extra waterproofing. Excellent value. Definitely would recommend.

Wow! These lights are high quality and super easy to install. Everything you need is included. I watched an online video and knocked the install out pretty quickly. I love these lights!

Just installed and they look great. I installed these using the FBC Harness Solution’s Raptor lights T-Harness for plug & play install without having to run a ground wire or struggle running an add a fuse into my main fuse box. Using the FBC Harness also allows me to have the Raptor lights on while the DRLs are on instead of only when the low beams are on. There were some things I wasn’t too thrilled about like: The smoked lenses looked a little dirty inside but it didn’t effect light performance. The “amber” LED is slightly more yellow with the smoked lenses compared to the amber lenses but just as bright. Not all lights clipped in the grille snuggly, one was loose but I only planned on using 3 of the 4 lights anyway. 8/10 overall considering the price. They look super stealthy when my truck is not on.

I bought these a couple years ago for my 2010 toyota tacoma raptor grill and due to the cheap listing price I was fully expecting these to crap out withing a month or 2 at most but ive had them now for over 2 year and have run them through heavy storms, floods, mud, sand storms, ice, extreme heat and I have not had a single one even show signs of failure. At the very least in my experience these are a 10/10 and if I needed to replace for whatever reason id definitely buy these again! Side note they where super easy to install with a little help from youtube.

The lights are bright and similar to OEM, light covers look fine but looks like water may get in if you force them or move the cable too much and break the silicon seal, so be carefull. The cabling is thick and connectors are kind of big for such small lights, project. I do not see why you need individual lights with a connector for each one of them because no seller will sell only one and for the price I guess you will end buying a new kit. So you need to route and zip tie all cables in a way that looks good and prevents issues with other cabling. The add a fuse socket is a good idea, but, most of the fuses in the box are hot, so, you cannot use the DRL (which is the best option) cause is always hot, and if you use LBL or other light (switched ones, not hot) fuses then the lights will only turn on at night when you use the car lights. The fuse they mention in the manual is always hot. I think is the D INJ one at the left side of the box. The one I ended using is 10A INJ on the top (next to big 80A INV one) and looks like the lights now turn on only when driving. Some people mention issues with that location, so I will need to keep an eye on it. I would recommend connecting this kit to the DRL cable using a "Y" connector or attaching the wire with a thing that can bite the cable without cutting. Plenty of options out there for that. but make sure you add a fuse to that new cable, a tube fuse will do well, small and convenient.

I bought these not knowing if they would fit my TRD tundra grill or not. I really wanted the smoke sense with the amber light and these where the only ones I could find. I had to sand down the corners, and used silicone to secure it to the grill. Not perfect, but they look great! I also only used 3 lights, I think it looks better with the spacing options on mine and it still worked fine!

Poor quality. After just six months, moisture is getting inside, & one of the lights is not working. Outside the window for a return. Not happy.

I had high hopes for this kit. Install was fairly simple, I siliconed the seams where the Amber cover met the black base to be prevent water ingress. When disconnecting the connectors, a couple clips broke. I contacted the seller asking for assistance and they were incredibly quick in responding, didn’t hesitate to help and within 24hours I was very surprised with their response and kindness. I would purchase from this company again. Lights are super bright, uniform in brightness and color. Quality of the harness is good, instructions are helpful and easy to read and the fit & finish is about 4/5. Love the way the truck looks now and customer service was incredible.

Lo anuncian como luz blanca y carcasa negra, pero ¡¡siempre mandan luz ambar!! no mandan las blancas, lo regresé la primera vez y me mandaron por segunda ocasión el color equivocado,

This is my third set in five years... these items aren't very durable. These ones had the best fit of any previous models. They also look the best. Now we'll see how long they last.

These were an easy install on my 2023 TRD Pro Tacoma. I have the stock grille and had zero issue with fitment. I did take black silicone, taped off the lens and sealed them (took 10 mins) as there were some reviews of moisture issues. I have had these installed for 4 months, been through Alberta winter and thaw, and through plenty of car washes and have had zero issues. If you want the looks as I did, they work great. Maybe time will tell a different story. If you are wanting visible lights from the cab (not my intent) you will not notice a difference.

I have a factory heritage grille, the lights don't clip in properly and can easily fall out. To solve this I zip tied the wires to hold them back and placed a small dab of gorilla gel glue on the rear corners of the clips. That way I can cut the glue and remove them if needed. I also recommend swapping the grounding half ring terminal for a full ring terminal to avoid it vibrating off down rough roads and trails. The LED lens covers are not all on straight, so anyone with OCD will hate that they stick out uneven. I bought smoked black lenses with amber lights. So, when they're off the uneven lens housings aren't as noticeable. Otherwise it was an easy install I do also recommend routing the wire into the fuse box with the factory wires. Learn how to do it properly... way to many videos showing people to pinch the wire through the fuse box cover double lip seal. If you do that it will either leak water into the fuse box or fray the wire over time with vibration. Conclusion for the price they're decent. I'll edit this if they don't hold up.