OneSpace Commodore II Big & Tall Executive Office Chair, Brown

I've only had this chair for 2 days. It wasn't difficult to put together and the instructions that came with it made it easy. All the tools you will need are already in the package with the screws. It seems to be pretty sturdy, but I will see how sturdy it is after about 6 months. I am 6'3 and weigh 310 lbs. I can tell you that the chair, on it's absolute lowest setting, sits really high off the ground. My feet just touch the ground sitting in this chair. I have a buddy that is 5'10 and the chair was too tall for him so if you are shorter than 6 feet, this isn't the chair for you. I like the adjustable headrest. The armrest is really comfy. To give you an idea of how wide this chair is, my waist is 45 inches and my hips are 48 inches and there is still a good 2 - 3 inches on both sides between me and the armrest and my legs aren't up against the armrest. I'll add more in about 6 months.UPDATE 6/13/2015:This chair is still going strong. I've had no issues from it. I'm in the chair about 1 - 4 hours a day. It still feels like I just received it. I haven't had to make my chair higher as it sits high enough for me on its' lowest setting.UPDATE 7/13/2016:Just like last year, this chair is still going well... It still able to move up and down and doesn't just retract after sitting in it for a long period of time. It is still comfortable and the cushion has not sunk in at all.UPDATE 8/09/2017:Well, it seems this chair lasts about 3 years. The gas lift is finally done for. It keeps sinking to the bottom and won't stay at the very top anymore. The leather has very little peeling and the cushion still feels really good. I weight a little more now than I did then, 320, but this chair is regulated up to 350 lbs. The armrest began to wobble a few months ago. It isn't severe. I highly recommend this chair. That being said, I'll probably get a different chair because I want something that looks cooler than this one.

Modified Review (First is below)Two months ago I ordered the chair, after some missing parts were shipped to me by customer server, 2 days later I was sitting in my chair complete. Excellent chair, oh my how the naps have come easy! The headrest and seat width are my biggest favorites! So a two month review update: All the other reviews confirm that the parts loosen, but honestly if you didn't over-tighten them, then you can re-tighten them as I have. Which has made my chair squeak less and not lean. Take your time on the install process, make sure your seat post is in correctly and not tilted. I'm looking forward to speaking with customer service again if a part does break, because there aren't many other companies that have responded as quickly as they have.When i first received my chair in the mail, i was frustrated over the package had been severely damaged, and inside i was missing the seat part. After which i wrote a very unpleasant review below. However inside each packaged you receive is a few papers that say "stop contact Comfort Products first for customer service needs!" Guys and Gals I reached out on 8/25/18 to Comfort Products Customer Service website. Five days after opening the package, and I hadn't contacted anyone until that time. Not Amazon, UPS who delivered the chair, or Comfort Products, the company who sells the chair. That seat arrived on Tuesday morning, Comfort Products expedited the shipping to get me the missing seat!!!!! That's service. So make sure you reach out, and keep your paperwork and package contents for extra screws in the event you strip one.Now, my review of the product!!!This chair deserves a 4 out of 5 star review from a 6'5" 380 lb dude on 8/30/2018. Yes this chair is rated for 350 lbs., but for a guy my size three things are always necessary in a chair: Tall Back, Wide Seat and High positioned chair. Yes i get all three, the headrest is a FANTASTIC bonus, and the seat armrests don't even touch my wide 21" butt. So why 4 and not 5/5 you may ask? Some of the materials at the bottom of the seat concern me:> the caster wheels are plastic and not a strong constructed material. If the manufacturer went with something more, they won't break in the near future. These caster wheels will break for any weight, my weight will likely hasten the matter.> The piston reminded me of the one i installed on my Walmart purchased Broyhill chair, so I already have doubts about it.> After installing the piston into the HEAVY METAL base (that deserves +1 star by the way) I felt that it wasn't in all the way. In the attempts to move it, the piston was locked in. After finishing the seat and sitting in it, i felt a in-balance in the seat. Now guys, I'm not saying the product is at fault, that could have been me for not setting it straight up during installation. Final comment: The in-balance is subtle, very subtle, its not jaring or going to hurt my back, but I need to find a way to re-seat the piston to make sure its fixed. Note: I didn't consider that where the piston is secured to the seat could also be at fault, while typing this review out. Stay Tuned for update on this matter!> The back support is lacking in this chair design, and this my friends is why -1 star on the review. I have to use a pillow for my back, a little disapointing, but I can tell you that this chair is a strong contendor among all my owned business chairs owned.Final ThoughtsSo many negative reviews on this product, my first was the same. Problems this chair has going forward in ownership. BUT I TELL YOU THIS! (Censored: FTS) Comfort Products is your life line, reach out, because they have service for the years to come. If my Comodore II Piston breaks, or the arm rest falls out of the back seat. Well, i'll just order a new part, just like you will for your car. Guys I love this chair, and i have been itching to buy it for over a year now, but those reviews told me to look elsewhere. Every chance I looked at so many overpriced chairs I would return to this one. My weight isn't going anywhere anytime soon, but even if I break something, i know that an AMAZING company stands behind their product. For that reason I stand behind not buying another chair for the years to come. For Christmas I will be purchasing 3 more, for my friends with similar lifestyle choices.First Review after date of receiving 8-20-18.I have had an eye on this chair for awhile, but was met with a very unpleasant experience noticing the package was very damaged. I am aware that if the price of the chair was dropped because the package was damaged I would understand. Good news was my confirmation was correct that none of the pieces inside were damaged. PROBLEM: The seat was missing entirely! I have everything but the seat, as per the assembly instructions.I would gladly change my opinion of the chair if Comfort Products would send me the seat separately. Otherwise I have to return for a refund and try again. I want a chair like this and give it a shot, after all i have been paying attention to it for awhile.

I've just started using this chair, but my early impressions are very positive. It's quite comfortable and adjusts more easily than similar chairs I've used, which have usually needed some persuasion to tilt or recline as needed. Assembly wasn't too bad, with one exception: the bolt holes for the arms seemed just a bit out of true on my unit, which made them a real adventure to align and tighten down. In all other respects, though, I'm genuinely impressed. I can't speak to the gas cylinder, though, as I use the chair at its lowest height.One more thing, which will probably not apply to most people looking for a big & tall executive chair, but was a lifesaver for me: low overall depth, compared to most other B&T chairs I researched. Front to back, it doesn't take up much more space than the task chair I purchased it to replace. If your desk space doesn't have much extra room behind you, as is the case for me, this might be exactly what you need.Pros: Comfortable, easy adjustment, easy assembly (except for the arms), small depth footprint.Cons: Fit and finish on the arms could be better.I'll update this review if I run into any trouble, but if this chair continues to perform to its current standard, I'm definitely a fan.UPDATE, 5/30/2017After some use, I noticed the seat was slightly off level (the rightward tilt some other reviewers have mentioned). Taking the chair apart revealed some skewed holes in the bottom of the seat, causing the seat plate to be attached off-center. I contacted Comfort Products about this, and they swiftly sent me a replacement. The seat is nice and even now, the chair as a whole is as comfortable as ever, and I'm really impressed with the customer service. 5-star rating stands!