AC Infinity AIRLIFT T10, Shutter Exhaust Fan 10" with WiFi Temperature Humidity Controller, EC-Motor Wall Mount Ventilation and Cooling for Sheds, Attics, Workshops, and Greenhouses

Bought it in preparation to exhaust air from my two car garage in the summer months. Prior to knowing this fan existed (stumbled onto it by mistake) I initially bought the typical 12” galvanized shutter exhaust fan to pair it with an Inkbird temp and humidity controller but found out the stud spacing above my garage side door was only 14” wide. The 12” fan was 14.5” wide so I had to return it as it wouldn’t fit. While searching for a 10” model exhaust fan, I found this AC infinity with built in temp and humidity controller which works great and looks sleeker IMO to the galvanized fan! Installation was a breeze once you cut out the appropriate hole in the wall. Air Movement is great in level 5 (out of 10) for my 2 garage space (290 sq ft) with minimal noise. A fan speed of 10 is fairly loud like a huge box fan but does also move lots of air at that speed too. Will have to wait till summer to see how much cooler it gets and how much humidity it can exhaust outside. One minor negative is the sides and top of the shutter has gap of 1/4” or so. I had to use some different thickness of one sided foam tape to fill in the gaps while still allowing the shutters to open freely. Now the gaps are 1/8” or less. Overall, I’m happy with the initial purchase but wish they had a model with WiFi controllability. I will gladly pay $40 on top for that as an optional feature. Also, maybe have a programability mode to set schedule for days (M-Su) and hours when the fan can kick on/off will be cool too! Nice job AC Infinity

This fan is amazing. Bought it for the purpose of clearing the air out of my garage. I smoke and it does exactly what I needed. Clears 450 sq ft of space in 3 minutes or less. I cut a hole in my upper garage door panel and installed it and it’s not too heavy and does a great job. I have had this fan over 4 years and have had zero problems. Sometimes running it 24 hours a day for several days at a time. It’s gonna make noise. It’s a fan. It has ten settings and is loud in my opinion after setting 5. It’s worth the noise to do what it does. It will also reduce the temperature by a few degrees as well as the humidity by as much as 5-6 degrees. I have a more modern garage as a note but if you seal up around the doors and insulate the doors you’ll have great results. You’ll thank me later.

I have an 18x10 shed that has a storage area on one side and a built in workshop on the other. It was getting very hot in the summer. Luckily, the shed had gable vents on each side, so I cut out one of them and installed the vent in the opening. I wired everything and it worked like a charm. The controller/thermostat was confusing to set up but the phone app and Bluetooth are fantastic. I could set up all the settings from the app and the interface was very intuitive. So. I actually set up the temp and humidity settings for the fan to automatically come on directly from the app-super easy. And the fan is relatively quiet and adjusts speed as needed. Yes, you can hear it running, but it isn’t a nuisance and considering how much cooler my shed is, I don’t really even notice! In fact, when I was showing off the shed to my brother in law, he couldn’t believe how the shed wasn’t that hot, and then I showed him the fan! Great product, easy to install, quiet, and the app is fantastic!

Great fan! Works fantastic. Easy to install. Controller 69 Pro and app works great. Honestly, normally can find something not perfect. With this item. Nope!

The unit is well made, nice black finish, quality easy to read LCD, easy to program. I have my unit mounted vertically and has no problem with the vents opening at speed 4. The fan runs quietly. I'll have to see longevity, but I only have the fan to run at over 89F or over 65%RH, and at speed 5 (out of 10). It provides sufficient air circulation pulling hot air out of my ~900 sq ft space supporting my air conditioner much more efficiently. The only reason why only 4 stars out of 5 is because there is are fairly wide gap between the vent slats and the bezel so insects can easily get inside, also I suspect during the winter the gaps will cause cold draft to come inside my space so I will need to make a cover for it.

I used this fan to directly replace my old non working hydronic garage heaters fan that burned out. 4 self tapping screws and it was solid to the sheet metal. I did strip the fan from the louvers although it would have fit this “Beacon Morris twin flow” hydronic heater with the louver shroud attached and louvers removed from the shroud. Very easy swap, and I’ve effectively added an aqua-stat to turn the fan on when the thermostat calls for heat. Once the pipe is hot the fan kicks right on… I used to just run the old fan on a switch which wasn’t ideal. I can also turn the fan on independently and circulate the air in my garage with no call for heat which is why I chose this. I will probably program to help regulate the humidity in the garage for the summer too.. This fan is much quieter than the fan it replaced. I run it on 6 or 7 for quiet operation. 10 gets a bit loud and really gets the air moving… AC infinity has great products that I have used and trust..

Looking good so far. I installed the AIRLIFT T10 with Wi-Fi controller in small 2 story out building. I went with the 10inch for the location I wanted to put it. However, in installing and reading the manual, with showed controller 69 pro could run up to 4 fans, I noted I could fit 2 side by side and add more fan circulation. Therefore, I set it up for 2 fans as I installed the 1 fan I had. Went to get a second fan and found out you cannot buy just a fan. You have to buy a fan with some type of controller. Not cool. Anyway, I got the fan with another 69 Pro controller and that way I had a backup controller. The fans fit great together and work fine. The controller is on AUTO mode with both fans running off the same settings. Really like the app. The history graphs are great and can be viewed by hours, day, week, and month. Now, I need to wait for summer to see how they will help in the Texas heat.

I bought this (10 inch model) for a small LAN closet that gets way too hot in Summer, reaching 40C on hot days. The size of the room is 4 by 8 feet. An A/C unit is not feasible in tis room. I set the fan's sensor to kick in when the temperature reaches 26 C. It blows my mind how fast this fan decreases the temperature to 25 C. Literally in about 30 to 40 seconds on a hot day (30 C outside). My only gripe (minor) is that the controller that comes with the unit is not as sophisticated and flexible as the ones that come with their A/V and rack mount fan systems. It still does what I need though, and I was fully aware of this so no points taken for this. Overall - very happy with the purchase, and highly recommended.

De buena calidad los materiales, solo lo único negativo es que no tenga opciones de idioma en español, tanto la app y el instructivo físico, lo demás está muy bien, fácil de programar y usar.

There’s better options on the market. Don’t waste your money on this one.

The exhaust is not working properly as per instructions. Requested return and they are making me pay shipping.