Titebond Cold Press Veneer Glue, 32 Oz. – Contact Cement Alternative – 5175

I live way up North In Idaho and we have lots of moisture for 5 months every year. The glue works very well and when properly stored, it maintains a tight bond.

Still is the best veneer glue, but you must shake it thoroughly. I shake for at least one minute prior to application and use a cold vacuum press for three hours to ensure proper adhesion, as I've had bubble in my veneer when only pressed for one hour.

Excellent glue for veneer. I used it with a board and clamps. Works great but does need significant dry time. Overnight worked best. Careful not to roll too much glue as it can harden into a solid ripple or bump.

I bought this expecting a great result. Boy, did I have a wrong number! I planned to use this on a large desk that needed some love that has been in the family for many years. Sure glad I tried it first on a test piece. Was adhering veneer to a dry, clean piece of wood in indoor temperature prior to cutting the veneer to fit the project. It only adhered about 1/2 of the 12" piece of veneer to the test piece. I'm just going to go back to contact cement which has always worked for me. This product absolutely failed my test case. Sorry I wasted $10 on it. It just doesn't work.

Just follow the YouTube recommendations & this product does a great job.

I have previously used Unibond C800, which does a nice job but dries rock hard and can leave a dangerously sharp glue line. Thought I'd try this, and I am very pleased with the results.High points:- minimal bleed through, and what little there was disappeared with the scraper- reasonable open time so I can glue up a couple of projects for pressing at the same time- easy to apply - not too thick or runny. I used foam brushBe aware of:- I read somewhere that 1-2 hours in press at 70deg F recommended, but found glue still wet and first project I removed at that time was not set and created a ridge in veneer- since leave in press more like 6 hours and nicely set and no movement ... this in PA summer temps 80+ and humid- nice result and no sharp edges to cut me.In summary I am buying more and will continue to use. Nice not to have to mix 2-part glue, and great results so far after 4 projects through press.I think the other reviews that complain of wet glue did not leave in press long enough. I strongly suggest 6!hours at 70+

Husband, with his usual loquaciousness, tells me, "It's glue. It worked."

Cold press veneer glue works well with all types of veneer. It gives you plenty of working time to apply to the substrate place the veneer and put in a vacuum press. It is advisable to mix the glue throughly to make sure solids are evenly distributed in the glue to minimize bleed through.

Habe mit diesem Holzleim Starkfurniere ca. 2,5 mm verleimt. Hat sehr gut funktioniert. Saubere Verarbeitung möglich. Entspricht somit der Beschreibung. Lieferung erfolgte schnell und problemlos.

This is a high quality glue and perfect for its intended purpose .

Prima product. Let op kleurt wel naar bruin. Ik ben geen professional. Ik heb licht fineer gebruikt hierbij “lekt” het soms door, dit kleurt dus naar bruin.Aanrader!

Found it locally after for a1/3 of the priceThe glue is very good but only 2 stars because of the price

top!