Bed Band The Original Adjustable Fastener/Holder/Strap/Suspender/Gripper for Your Sheets (3 Pack - White)

I have a memory foam mattress that is about 11 inches thick. Most decent sheets seem to be made to accommodate mattresses up to about 15 inches, which means there's plenty of material to bunch up.These bands installed really easily, at the corners of the mattress. They don't reach very far in to the middle areas of the edges, and I find that while they are keeping the sheets relatively taut at the corners, there's still some wrinkling and bunching occurring from the areas on the sides that are furthest from the corners. It's much better than it was before, and a quick smoothing with the hands seems to be all it takes to work most of the wrinkles out, rather than having to strip the bed down to the fitted sheet and straighten things up that way.Being a combination memory foam/gel mattress, it's not terribly heavy and I was able to attach these bands to the sheets easily. If you have a heavy mattress and a bed frame that encapsulates the mattress, it may be more of a chore to get these on lifting with one hand and manipulating the clips with the other. In that case, one might want to have an extra set of hands to help lift while the other clips them on to the sheets.

So, I often read the bad reviews before settling onto which product I will buy! Spent time reviewing several bedsheet holders before buying this one!I must say that I'm pleased with the job they're doing! In fact, I've discovered that I only need to cinch down two corners diagonally for them to keep all four in place! They work very well!My mattress is King sized and deep! I move around in bed at night and have often woken up with the fitted sheet popped off the corner and under me!This product has solved that issue and it only took 2 holders to do the job! So now, I have 2 extra for when these 2 eventually wear out!2 thumbs up for this product's effectiveness! I'm a happy camper!

BLUF, we've been successfully using these in combination with two other sheet holding devices for about the last week or so. I wish they were longer as we had to use them at full length (and consequently lost the functionality of the center adjuster) because they are securing a fitted sheet on a California king mattress.We've gotten tired of wrestling with non-fitted sheets on our California king waterbed for several years and recently replaced the waterbed mattress with a California king coil spring, reversible mattress from The Original Mattress Factory. This model (Orthopedic adjustable) fits tightly enough in the waterbed frame making it a major challenge to lift out and make/adjust the sheets -- but not tightly enough to hold the fitted sheet in place in the long run. We purchased sheets from Amazon (ASIN# B06X6MBV92) that we like and used these Bend Band grippers combined with SheetLock fasteners (B01N5SIATD) and Original Sheet Suspenders (B0014AMBWK), also from Amazon, to make the fitted sheet stay put.Since the fitted sheet would have been a pretty loose fit on our 10-1/2 inch tall mattress, we used these Bed Bands in each corner. The clips themselves held very well to our particular sheets (which are a bit slipperier than plain cotton) when we tested it by tugging on them once secured to a sheet. Because we had them adjusted at full length, the only way we could set the tension was based on how far away we clipped the second clip along the adjacent side of the corner. The elastic cords in these Bed Bands seems to have stronger tension than straps that we've used and I suspect the elasticity of these corner "cords" will outlast that in the straps we installed elsewhere on the mattress. We used the Original Sheet Suspenders in a cross-shaped pattern and the SheetLock fasteners across the shoulder and foot areas to complement the Bend Bands.Since our mattress has no pillow-top portion and no memory foam, it's a rather solid, firm surface and I'm impressed that the sheet is held in place very well by these Bed Bands along with the two other gripping products. I'm deducting one star because they don't seem to be long enough to place where they would singularly hold a Cal king sheet in place. I'm not really certain any single solution would work over the long run. That said, I think if these were used alone on a twin or full mattress, they might have more overall sheet tightening results.Finally, I would note that the user has to be practical in adjusting the tension on the bands -- on this or any other similar products. The more tension you put on the elastic, the more likely you'll experience the clips slipping off the sheet. I think most of the manufacturers know this and don't make the clips so tight that they are more likely to *tear* the sheet than to *slip off* the sheet. If you're looking for military cot type of super taut sheets permanently, put heavy duty tarp clips (ASIN# B01KTULL80) on the sheet, tie cords tightly between them, then drop the mattress in place. Be sure you don't have a reversible mattress because I suspect those clips will leave noticeable indentations on the bottom side of the mattress!

Sort of difficult to "install" with just one person. But by holding the corner of the mattress up with my head, uttering a few swear words and using both hands I was able to secure the Bed Band to the sheet. Once installed it did not come off or slip at all.

Holds the bottom sheet in place just fine. A little awkward to place

I sleep on a loft bed, so installing the mattress cover so it completely stays put is a difficult task. After having to fiddle and adjust it at least once a week, I was starting to tear my hair out (and I don't have much to begin with). These worked GREAT!! Mattress cover stays firm, wrinkle-free, and I haven't had to readjust it since.If you have a loft bed I can't recommend this enough!!!!

I have a deep pocketed fitted sheet and I’ve never seen so much slack in a sheet before. These help secure the sheet, but it doesn’t completely alleviate the loose fit.

They do what they say and hold together.

Finally something to stop my sheet from always coming off. Specially if you have a remote control bed

They work but can be annoying to get it the latch down when you max out how tight you want it.It'll take some time but one you'll figure it outIt won't be as hard.CAUTION this can take out and eye. I got too close try to look where I was clamping it down and released and almost hit me on the eye.There is NO need to do what I did. It was sill of me so please be safe !

Kept my slippery bamboo sheets in place awesome!

My husband and I are so impressed with the quality of these 'pocket sheet' 'BED BANDS'. These BED BANDS are worth the weight in gold. The quality is impressive as my husband and I have Chronic pain and I'm disabled, needless to say we are not sound sleepers. We flop from side sleeping to sleep on our backs, the sheets had to be fixed once or twice a night without the 'BED BANDS'. The fitted sheet now stays for weeks at a time! My husband and I are impressed with this product!

did not hold that well and i kept loosing them