AUTOSAVER88 OE Style Running Boards Compatible for Jeep Wrangler JL 4-Door

Very easy install. Looks and works great...much better than metal running boards. They always rust like crazy.

Perfect fit for my 2026 Jeep wrangler

I purchased these running boards for my Grand Daughters 2020 Jeep Wrangler. The webpage of this item clearly states that these running boards fit this 2020 Jeep Wrangler. The package arrived in good condition and my son and I spent approximately 2 1/2 hours assembling the brackets to the running boards to attach them to the Jeep. The bolts need to attach the 6 brackets to the running board were too short to fit, so I was required to go to the hardware store and purchase longer bolts. This cost a little over $18. Once fully assembled, we attempted to attach the board to the Jeep and found the brackets did not align with the holes that are pre-drilled in the frame of the Jeep. I contacted the supplier, only contact is via email and explained the problem and requested that they send the correct brackets. They informed me that there were NO OTHER BRACKETS. The asked what vehicle I was installing the boards on and the VIN. I provided all requested information. They said they could not find the VIN, but offered me $45 to have them installed locally. I called 2 places and was told by each they would charge in excess of $300 to install them. Obviously, the supplier has posted FALSE information on the Amazon Website. It took me over 2 weeks to get the supplier to agree to a refund. I suggest you do not purchase these running board. They are very nice, but probably do not fit you Jeep, and the bolts do not fit, so you will be required to purchase additional bolts to attach the mounting brackets to the boards. If you do purchase from this supplier, I suggest you first place the brackets under the Jeep to see if the line up with the mounting holes before you purchase additional bolts and spend a couple hours assembling them.

Works Great Easy to install looks good too.

If you're looking for an honest review of this product, keep reading. OVERALL, I can say for the money, this is a pretty good choice. I needed steps that were cheap so my fiance wouldn't have a hard time getting into the car, and I think they do a good job at serving that purpose. HOWEVER, as you can see in the picture, only one of the brackets (on both sides) did not line up with the existing holes. This happened with both steps but the ones closest to the rear wheels (the brackets fit perfect for the middle and front holes). Everything else fit and tightened well. I decided to just keep it that way because I hardly have passengers stepping into the back seats, and it feels pretty sturdy overall in the front (I weigh 184 pounds, and I jumped on it, and rocked the car side to side). I might have accidentally switched the brackets (placing the front ones in the back and vice versa), but I followed the instructions and images as best as I can, and I'm sure I placed the correct bracket for the rear. INSTRUCTIONS were fairly simple to follow, the only confusing part was knowing which of the three brackets to place on one of the three parts of the steps. There's small, medium, and large, they're all in separate small boxes. They send extra hardware incase you need it. I placed two spring lock washers and flat washers for each bolt. Installation was simple and can be done by one person, just install the brackets onto the steps first. FINAL POINT, it looks GREAT. I think the color matches the existing fenders (check other pic). It looks like a true Mopar part. It's comfortable to step on, it has good grip (haven't tried it in the rain or slippery conditions yet). For the money, I think it's more than decent. Just disappointing that last hole couldn't be bolted but if you're in my same situation (where it's very rare to carry rear passengers) I think it's a risk willing to take. If this can last me 2-3 years I'm happy.

Im a single woman who is pretty darn good with power tools and fixing up furniture etc so the diy thing had me confident....the directions are truly terrible...just terrible and you'll get some plus there's a pdf on here that you cash grab (not the same). Here's the thing....if you have a handy person with sockets and a torque wrench and an understanding of lb pressure settings...you're good....but if you cant and don't know anyone then you need to ask yourself "who will I call". Because I called a lot of places and they didn't want to mess with anything from amazon or anything they didn't sell...it was a wall nightmare (and they shorted me an M6 hex bolt). I realized I would have to return for a more expensive but easier to install version (with actual videos) but at the last minute I found a local handyman on the neighborhood app and he did it for $50! I gave him $100 because I was so grateful. That being said....terrible directions, missing bolts, totally lost on what to do and yes it's dark dark gray not black ( but it looks fine...it's a jeep for goodness sake.)....you just can't beat the price and I'm barely 5'2" so I needed these so bad. I love them because they just don't look like the deal they really were. I'll try to attack photos but know all this before going in and you'll be fine.

Quality parts. The wiring looms and connections are all well done. The instructions do give a bit to be desired. The steps work great once they're installed. My 8-year-old, wife, and my bad knees appreciate the extra step to get into the truck. I really wish these were much easier to install like several other power step brands using just the OBD port. I also really wish that the traction ribbing on the steps was at an angle instead of being perfectly horizontal to the actual step because it causes mud to pack into the grooves, reducing the effectiveness of the traction bars. I put these on a 2024 Ram Power Wagon. The top step wound up just below the door where the lower body begins to roll into the pinch seam. The bottom step when deployed is exactly halfway between that and the ground. The power wagons are a bit taller than the regular 2500 and 3500 Rams so I'm not sure that the bottom step would be quite as useful on non-power wagon models. The bottom step also protrudes a few inches out from the top step similar to a stepladder. Again, this really does make it easier for children, shorter people or people with disabilities to get into high vehicles, whereas I'm not sure the single step power options would have been quite as helpful. I'm 6'1 and 235 lb and I have not noticed any flex at all when I stand on either step so they do seem to be very sturdy. So, the positives are multiple steps in a great configuration that make getting in and out of a taller vehicle much easier. The negatives are again the extensive amount of wiring required that will easily take several hours. The horizontal traction bars which seem to hold dirt. The necessity of poking wires through the bottom of your vehicle which may mean drilling through metal or at a minimum drilling through a plastic drain plug. But that problem can be mitigated by copious amounts of silicone sealant. Overall it's a good product, but if they fixed those issues it would easily be a five-star review.

I put these on my 2021 Rubicon 392. Compared to the $400+ OEM running boards these seem like a great deal. Install was easy but not flawless. One of the studs broke where the running board mounts to the body. It twisted off like it was bound up and I did not realize it was happening until it snapped. Also, the running boards have the nuts molded into the shell for attaching to the brackets, and I found I needed to drill out the plastic behind each nut so the screws would tighten properly.

Facile à installer, look super, on dirait un marché pieds d’origine

Installation très facile j’ai même réutilisé la boulonnerie d’origine du Jeep. A première vue le produit semble parfait pour le prix

Parfait

The hardware is cheap the Bracketts twist and break the nuts don't even tread without using a dye set. Dont waste your time by ordering this

The passenger side , all bolt holes do not match up. 2 of the 3 holes to secure it to the chassis was ok but the 3rd one does not match