AIYIMA DC12V-24V 2.1 Channel TPA3116 Bluetooth-Compatible Stereo Subwoofer Amplifier Board 2x50W+100W BT Audio Amplifiers Board with Sub

So simple to wire up. Built my own blue tooth system - sound quality is great. Slight hiss at lower volume but for workshop/gym use - perfect. Crackles if not earthed, but once fully wired in, faultless. More on order for ceiling mounted speakers. Cheap and simple way to BT the whole house.

I've been running this for a week or so. It produces a good (adjustable) sound (shows how good your speakers are or ain't), connects by bluetooth easily, and is excellent value for money. Will report back if it lasts (or not)...

Sounds great, but in a vehicle you'll need to feed this more than the 12-14V your batteries or alternator provide as you will get a clipped output for the sub. I bought a heavy duty DC-DC boost circuit set to 24V. At high volumes, when the Bluetooth is connected the blinking blue LED introduces a high frequency noise.

sound output is very good.

Like other reviewers said (I should have believed them...): This amp is very noisy. It has a sort of noise suppression system, where the sound cuts out completely at low (or no) input, probably to mask the hiss you get while it IS producing output. I tried different power supplies, including a bench power supply at different input voltages. No difference. Also annoying is that it powers up in Bluetooth mode, you have to manually switch it to LINE IN every time - if that is how you want to use it. And it gives an annoying bleep on power up, AND speaks "line in" on switching to the line input. I got this amp to replace an old, equally cheap (LEPY?) 12V amp which did not have a subwoofer out. The old amp is now back in place. It does NOT hiss. This one is rubbish.

Good value for money, great sounding amplifier.

This will make a perfectly usable 2.1 system. However, the controls are not as described. The low pass does not work as such and low frequencies will get to the main speakers. If you have main speakers that can produce good bass, then OK. If looking for a proper crossover from sub to mains, then this is no way that. Noise is low. Frequency response is good, but crossover is pants.

No distortion, very loud and well made

This AIYIMA TPA3116 Stereo Subwoofer Amplifier Board has exceeded my expectations. The amplifier board delivers a powerful audio experience with its 2.1 channel configuration, featuring 2x50W for the stereo channels and an additional 100W for the subwoofer. The amplifier features a genuine TPA3116 chipset which ensures high-quality sound reproduction, and the amplifier board supports a wide input voltage range from 12V to 24V, providing flexibility in power supply options. This versatility makes it suitable for various audio setups and applications. One standout feature is the Bluetooth connectivity, allowing seamless wireless audio streaming. Pairing devices is easy, and the connection remains stable, providing a convenient way to enjoy music without the hassle of wires. Installation was straightforward, thanks to the well-labeled terminals and clear documentation. The board also includes subwoofer crossover frequency and volume controls, allowing users to fine-tune the audio output according to their preferences. In terms of build quality, the AIYIMA amplifier board feels robust and well-constructed. The components are neatly arranged, and the board is designed to dissipate heat efficiently, ensuring optimal performance over extended use. The main volume knob can also be used as a switch to toggle between AUX and Bluetooth on pressing. The sound output too is impressive and perfect for home and semi professional use. The amplifier also has many features like speaker protection and anti pop which keeps the speaker safe and will help in its long life. Overall, the AIYIMA DC12V-24V 2.1 Channel TPA3116 Stereo Subwoofer Amplifier Board is a fantastic choice for audio enthusiasts seeking a powerful and versatile solution. Whether you're building a custom audio system or upgrading an existing setup, this amplifier board delivers on both performance and convenience. Highly recommended!

Hab die Platine mit einem 24Volt 6 A NT (das billige von Amazon für 15 Glocken)und einem Monacor SP8/150 Pro und einem Tang Band W5 in Betrieb. Da kommt schon gut was raus. Blauzahn geht einwandfrei im freien Feld bis 8 Meter wie angegeben, nutze aber eher den Klinkenanschluss. Über mein Händy (Xiaomi Mote 10 Pro) funktioniert das einwandfrei ohne Rauschen. Hatte aber mal die Klinke über ein Radio angeschlossen wo starkes Rauschen auftrat, weiß der Geier warum!? Leider gibt entweder das NT oder der Verstärker im Bassbereich recht zeitig auf, bis zu einer Gewissen Lautstärke alles einwandfrei und Sauber, Tick lauter und das Klipping/Klirr ist enorm. Auf dem Weg zu mir ist ein weiteres NT mit 24 V aber 10 A um das evtl. auszuschließen und eine weiter Monacor 8/150 Pro damit ich den mit dem vorhanden Parrallel (auf 4 Ohm) schalten kann um auf die Volle Leistung des Verstärkers zu kommen. Deswegen wird es hier noch ein Update geben. Trotzalldem für den Preis ist die gebotene Leistung einwandfrei.

Très bien pour faire un enceinte bluetooth assez puissante ! Pour le moment aucun soucis m, seul bémol l'antenne de base bluetooth est vraiment bof

Qua geluid redelijk, vrij klein stereobeeld maar leuk in te stellen met sub en normale stereokanalen. Snelle bluetooth maar... Continu een sis op de achtergrond. Op verschillende voedingen, accupack en voltages geprobeerd. Bij een lager voltage wordt de sis minder maar is nog steeds aanwezig en gewoon hard. Niet zachtjes op de achtergrond maar echt aanwezig. Daarom helaas een complete afknapper

Muy recomendable, suena bien y es potente