Adjustable Shower Head Holder, Bathroom Suction Cup Handheld Shower Head Bracket, Removable Handheld Showerhead & Wall Mounted Suction Bracket (White-1)

I use this to hold the hand-held "Body Wand" from my Waterpik shower system; Because I have an unusually high shower arm, the bracket that is part of the system places the handheld wand at an odd angle. This Adjustible holder has very strong suction, thanks to its design in which the entire front (the bracket) acts like a trigger to lock down the suction cup in the rear. This holder is suction only - no screws, no sticky glue. I was skeptical about the suction working, but it's very strong - I don't have to be delicate about removing or replacing my hand-held shower wand. It is on TIGHT!It can also be swiveled, tilted, or rotated in any direction. It does need to go on a smooth and FLAT surface - my shower has shiny fiberglass walls (think 1970s 1 piece tub/shower). With grouted tiles, you'd need to stick it to the middle of a tile, and not overlap a grout line.The opening for the hose and hand-held unit is tapered a bit, and should hold any standard design hand held. Mine sits in there just fine; it doesn't slip down or flop over at all.I received two of these, and two are pictured in the listing; at first I thought one was for suction and one for glueing, but no, they are identical suction models. Thank you.

I bought this to replace an old shower head holder that wouldn't stay stuck to that wall anymore. I add these to the shower so when my 6 year old son showers in there he can have the handheld shower head down at his level - he thinks it's pretty cool. Anyway, I wish I would have replaced my old one with this a long time ago. This is great, it has a really strong suction, and, while the adjustable part only swivels around a little - it's a nice addition. For whatever reason, in my head, I had textured tile. Turns out I don't, so this ended up working on the tile as well as the glass.

I bought this product for our stand-up fiberglass shower in the basement. You do have to make sure that the walls of your shower are nice and clean before applying the suction cup. The reason for purchasing this product was because my parent had recently had a laryngectomy and could not be in direct contact with the shower head do to water going into their stoma site. This device allowed me to maneuver the shower head in a direction that would not directly hit them in that sensitive area. It's very easy to remove the shower head from this device if wanting to have a handheld function feature. The device is very sturdy.

Me and my partner often shower together and getting this suction cup has made the experience even better. We now each have a shower head on our own side. A quick and easy way to make your shower dreams come true.

My handheld shower is a bit on the thicker side, and another showerhead holder didn't fit. So I was looking for one which had a bigger diameter. I found this one, and I believe it was the widest diameter on here. Took a chance and ordered it, and I was super happy when it fit my handheld showerhead!!The suction works brilliantly, and holds the showerhead in place.It is perfect for my needs!Edit to Add: I ended up buying another one because I can now put my shower on two different heights.. one for normal and one for when I wash my hair. 😃 Quite the useful little gadget.

Until now, I’ve never actually found a suction cup that worked well on a tiled surface in a shower stall. This one does. I’ve had it for about ten days, with the weight of the shower head in it, and had multiple showers, and it has not budged. Further, it’s easy to remove, move, and re-attach, which I’ve done several times as I figure out the best location.

I never thought that there was a market for such an item. Until I needed one for a family member whose reach is not great. My online research led me to this option which had many good reviews. I had to mount it on a new tile shower wall. After flipping the lever to seal the suction cup side in place, I knew I had made the right choice. Using reasonable force would not dislodge the holder. I t was easy to release and reset until it was at the perfect height on the shower wall. The holder itself turns to aim in most any direction one can imagine. And, most importantly, the shower head grip fit and stayed aimed in the desired direction.

Who would have thought one could be so happy with a simple suction cup shower head holder?!?! I am!!!!I recently got a new 2-piece rain shower head with a hand-held shower head. But the cradle for the hand-held is on the main shower head—which is 7 feet off the ground!!! I cannot reach it! My husband suggested trying to find a separate holder for the hand held and here it is!!This works perfectly! Its also easy to install: Before sticking it to the shower wall, I cleaned the tile with rubbing alcohol. To install, you just press it to the wall and lower the “arm” to suction it to the wall. This comes as a set of two—I need only one. The second one is a waste. The set also comes with an adhesive pad for each holder, but Ididn’t want to stick that to the wall and am using only the suction. It’s holding fine.Without this handy little solution, I would either (1) not be able to reach and use my hand-held at all, or (2) I’d have to leave it dangling all the time which just looked bad.Thank you for making this perfect solution to my problem!It didn’t come with any instructions but I didn’t take away any stars for that because I thought installation was pretty obvious. I DO recommend cleaning the wall with rubbing alcohols first to sure it will have good adhesion.I write honest reviews to help others make informed purchases because I read reviews myself and appreciate how helpful they can be. I hope that my review helped you!

Llegó en el tiempo pactado y bien empacado. Es de fácil instalación, pero no funcionó en la loseta de mi baño. A los 20 minutos de haberlo puesto se desprendió. La loseta es un poco áspera (no es completamente lisa), pero como en la descripción del artículo dice que en cualquier superficie se podía usar, por eso lo compré, sin embargo no cumple con lo prometido. Incluso en las fotos que publican ponen materiales distintos, pero no creo que tenga la sujeción que dicen ya que mi loseta no es, ni por tantito, como las superficies que publican. En la loseta con superficies lisas (como las vidriadas) funciona. Por eso es mi calificación de tres estrellas.

This product helped me achieve exactly what I wanted. Did not want to have to drill shower tiles, so this product allowed me to lower the height of the shower head. Works well, plus I can change the location anytime I feel the need. The suction cup works well, and I would highly recommend this product. I’m a happy customer, and the shower head holder looks great in my shower stall.

se ve bien, pero no sirve, hice pruebas en diferentes tipos de superficie y no se sujeta. Solamente logré sujetarlo en la puerta corrediza de la bañera, pero es muy poco tiempo el que dura pegado, una vez que se succiona a la pared pasan unos 5-10 minutos y se vuelve a caer.

Muy práctica ya que se fija con ventosa con buen agarre y también viene con cinta de doble cara para superficies que no son completamente lisas. Es de plástico pero de buena calidad y le quedó perfecto a mi regadera de mano (Delta Faucet)

This is perfect for putting your hand held shower where you want it. It is easy to install and remove and install again! It comes with a clear, plastic disc to stick on to surfaces that aren't smooth enough for the suction to work - I have a fiberglass tub surround and did not need to adhere the disc. I don't think the disc would be as easy to remove and reuse.