Premium Printable Vinyl Sticker Paper for Your Inkjet Printer - 15 Clear Waterproof Sheets - Dries Quickly and Holds Ink Beautifully

This is a glossy, milky sheer type of sticker paper. If you look at the picture you'll see my ugly hand =_=# and debris from the cut paper, but I think the debris and slightly rough edges were the fault of a dull cutting blade in my cricut. I cut it on both vinyl and vinyl+ with no visible scarring/cuts on the back. And the print quality was perfect for what I needed- no smudging, streaking, or skipping. Ink didn't take any time to dry on it. The package came with a thank you card and the backing paper has printed across it to print on the other side of the paper which can be helpful (I have loads of paper that have nothing and it's annoying to have to peel a sheet on a corner to see what's what) but I'd actually prefer it without that in case I want to send out what I cut using this paper to a customer... they may or may not care, but I would rather it just be the brand name lightly printed on it as the only indicator to print on the flip side. I like this paper so far and will be experimenting with my print settings and cutting devices going forward. (I wonder what setting I'd have to use to do a die-cut...) Great quality product. And advertised correctly as frosty clear- you can see through it, but it's a super sheer wash of white. Would love to get this in a matte finish if they have a matte version. ♡Honestly, this was originally going to be an angry review and I was going to demand a full refund and note this brand as a bad one. However, I would have been wrong to do that.I had ordered this and somehow got something I wasn't supposed to, but instead of going through the return/replacement process, sometimes it's just best to calm down and reach out to the seller directly to make sure there wasn't some other reason for a messed up order. I'm attributing my grievances to Amazon because my customer service rep, Olga, went above and beyond to make things right and what was sent out from Zicoto was beautifully packaged unlike the first package that was in amongst my other Amazon purchases. Huge thanks to Zicoto for being extremely kind & sending replacements. :)

It's a great product if one actually takes the time to READ what's right on the package. It says it's frosty - not just CLEAR so be prepared for that. There is a slight translucence to the sheets so by that, when printed, it does not print where you cannot see through it. You will be able to see through it once printed. I created laptop skins. First one I goofed....My placement ended up being upside down (see Dell logo in second picture). That was MY fault....but as you can see, the detail to the print is there. Colors are vibrant and each sheet dried quickly. I used an HP inkjet printer (HP 6962) and used a Cricut Maker to cut my designs. Really happy with final product I created. Will definitely be ordering more!Suggestions for others - to avoid jams in your printer:- only have ONE sheet in paper tray and NOTHING else!- set paper thickness to OTHER PHOTO INKJET paper- make sure you have it print on shiny sideto make colors vibrant - set quality to BESTAnd think it through before placing. The adhesive is strong and to avoid bubbles underneath, make sure your surface that you're adhering it to is clean AND dry (unless applying by slide method) and use a soft squeegee for pushing down - this will avoid scratches on your design. These are direct lessons I learned from my project. :-)

The media could not be loaded.  Product as described. It’s hard to see the colors on my label but that’s not their fault. It was described as “frosty” and I decided to give it a try. All in all. Great product. Adheres well. Water resistant. I used my cricut explore air 2. Dry time was 5 minutes as described. No smearing or smudging of ink. HP printer used. It’ll do as a start for my daughter’s handmade lip gloss line.

As far as quality/function/etc., these sticker sheets perform well in both inkjet and laser printers in my experience, and also seem to stick well enough. The "frosty" color is interesting too--kind of a translucent white. Oddly though, they're glossy. I guess there are uses for glossy stickers that aren't either 100% clear or opaque white, but personally I'd have preferred something labeled "frosty" to also be matte, more like parchment stickers. Not a huge deal though, and overall I'm satisfied with what I got.

I thought at first there must have been a mistake with this paper after I printed it. The colors looked so bright and full that I thought it was white paper. After removing the white backing you can tell it is a frosty/clear sticker. It prints very well, holds ink well and is thick and strong. I found with my cutting machine I had to increase the force that I usually cut at, and also add a second pass with the cutter if I have some intricate corners because it tends to get stuck and tear other wise.

Pros:Smooth, glossy frosted finish. Exactly as advertised.Labels stick well.Laser toner prints on these REALLY well, no smearing smudging or scratching off.Really cannot beat the price anywhere...Cons:2 of my 15 sheets had debris under the sticky part...... pretty ridiculous in my opinion. All of my sheets had slight fold lines and scuff marks. So, quality control is a big con for me. These were for me to practice with so it didn't affect my use as it could have but I would not purchase again or use for business.Odd shaped stickers rip pretty easily.Very thick.

This product is very easy to use. It's a perfect frosty clear as advertised and grabs ink from my epson really well. Instructions say to wait 5 min for ink to dry, but I was able to touch the ink sooner (printing simple text). The frosty clear stickers peel easy off the sheet and have a nice thickness to them, I will definitely be buying again!Printed using Epson Workforce and die-cut with Silhouette

The paper is good, I love how my stickers look. The only thing at least for me is the color black you have to leave it overnight or maybe a little bit more in order for that color not the smear. Although it has been 24 hours and still does. Other wise I recommend, and if you have a cricut it cuts without a problem.