GlowShift Tinted 7 Color 30 PSI Turbo Boost/Vacuum Gauge Kit - Includes Mechanical Hose & T-Fitting - Black Dial - Smoked Lens - for Car & Truck - 2-1/16" 52mm

Works as it should with no fuss fit and looks good too.

Works great through day until after 5 then starts flickering and flashing and then turns off so there is no lights at all saw another review similar to what mine is doing can’t get hold off seller would like to get a refund or a new gauge as it’s faulty

Gauge came reading 3psi too high. Very in accurate showing 15 psi at 8psi and 3 psi at 100kPA. Not impressed.

Working perfectly almost 2 years now

2017 F150 3.5 ecoboost. Works as designed, amazing installation instructions. I did not wire the headlight option yet. You can find + constant 12v several places under the steering wheel. I use the passenger fuse box fuse #1 10 amp fuse with a micro 2 add a circuit fuse tap to get my ignition 12v. That fuse is perfect because it's your cabin dimmer delay. I did not have to remove anything to run the wire back to the drivers side. There is a ground screw right by the obdII port. My boost line went through the firewall grommets. The 2 factory zip ties are frustrating. The Dorman adjustable 1/8-3/8 tee is at all car part store, on the tee trim the 1/8 ends off the section inline with the original boost line. The opening was already 3/8 so you don't want to restrict it. I also got the Dorman variety clam set. I had to cut out about 2 inches of my factory boost line and heat the ends in order to get the tee installed. Save yourself some time and get a 12v circuit tester at Harbor for $3. Quickest way to find + constant and ignition 12v. Pull the side panel, vent and left half of the plactic under the steering wheel, everything is available from there. Good luck. Boost on friends.

Love the gauge, works great.

Worked great, I like that I was able to match the blue to my truck and it was easy to install

Muy buen producto