SBK-LM-HC01 Pair of Low Mount Racing Bucket Seat Mount Brackets Compatible with 01-05 Civic, Black

These brackets will 100% not fit a 2004 ES1 Civic 4 door (LX trim) unless you don't mind going through the hassle of extensive modifications and have a couple hours to spare for that. Like other reviews have stated, of all 4 mounting holes to bolt the brackets to the chassis, only 2 will barely line up decently while the remaining are completely off the marks. You will have to drill AND cut & weld in order to have all 4 holes of the brackets line up to the existing ones for the stock seats. And to keep the sliders on the seats that they're also selling and supposedly should work with these brackets, you will have to drill new holes and add spacers between the sliders and the brackets in order for the sliding mechanism to actually be clear of interferences and work decently. The welds on these brackets are not very structurally sound, so beware of this as well. Tl;Dr: overall completely AVOID these brackets if you value your time and want something that will bolt up nicely to the stock mounting holes without requiring you to bust out the power drill, grinder, and welder.

All of the holes lined up to fit my seats but after all of the time it took me to tap the threads and screw everything together, I go to bolt everything done in the car and i cant bolt all 4 of the bolts down. I can get 2 in clean and half of one if I hammer it in. The fourth one doesn't go in at all. Not worth buying. I’m sending these back asap.

These don’t fit an 2002 EP3/Civic Si at all. I have spent about an hour trying to make them work and still have work ahead of me. The seat is cocked about 5 degrees when bolted into the floor. I should have spent more for a better bracket.

One side for great the other didn’t line up properly, and then the welds broke off.

These brackets bend with almost no pressure, they are extremely flimsy and if you get in a serious crash you will almost definitely die. For your own safety please don't buy them.

Doesn’t line up with cars bolt holes. Will work if you cut and reweld. don’t recommend do too them not lining up the first

Does not fit the vehicles it says it does. Waste of money.

this ítem do not work as well, when l try mounting …one side of the hold it broke effortlessly showing a weak and rusty weld should improve the elaboration of this article since it may go against the safety of the user.

They fit great! Little to no modifications to fit!