JANCHUN Crystal Clear Epoxy Resin Kit 16oz, Bubble-Free, Anti-Yellowing, Self Leveling Easy Mix 1:1 Coating and Casting Resin for Table Top, Molds, Tumbler Crafts, Painting, Jewelry, DIY Gifts

Very well worth the price. Takes about 4 hours to setup and 8 hours to become hard. Full hardness in 24 hours. Dries crystal clear.

JANCHUN’s epoxy resin kit gets high marks for delivering crystal-clear, glass-like finishes ideal for any every thing, preserving flowers, tumblers, jewelry, and more. I used this epoxy and hardener kit for a few DIY projects, 2 preserve flowers from my son’s funeral. Also a tabletop and some resin art pieces—and I’m thoroughly impressed! The instructions were clear and easy to follow, even for a beginner like me. The mixing ratio was spot on (1:1), and I appreciated the smooth consistency during application. Once cured, the finish was glass-clear, with no bubbles (as long as you take your time mixing and pour slowly). It hardened evenly and has a high-gloss, professional look. I also liked that there was minimal odor and no yellowing after a few days of exposure to sunlight. Would absolutely buy again and recommend it to anyone looking for quality epoxy resin at a great Price.

Very easy to work with seems like a great product. Have only used once. The one thing it says you can demold after 4 Hours and that certainly wasn't the case for my project

The instructions are very clearly translated from a different language based on the grammatical errors present. The product itself is simple enough to use without reading them, though. It will ALWAYS cure completely within 24 hours as long as you do the following: A: Mix equal parts of A and B (by VOLUME, not WEIGHT) otherwise it will never harden completely. B: Stir until it looks blended enough, then stir some more to make sure, otherwise it will not harden in certain parts. C: Do not mix in cheap plastic containers or any containers you plan on using for anything except resin pours, as this stuff heats up when curing, and is very hard to clean off surfaces once cured (although it is very easy to clean as a liquid) It will stay as liquid for ~20 minutes after mixing, then will slowly gel and solidify over the next 24 hours. Do not mess with it until 24 hours have passed, as it may not be completely cured in the bottom or middle of your project. When it dries fully it is very tough, it took a few good swings with a hammer to shatter a small test chunk I had made. It is also perfectly clear once it hardens, and bubbles are not an issue unless you are making taller/thicker resin pours, as the product stays liquid for long enough to allow bubbles to escape naturally from smaller setups. Even with colorants added (food coloring/acrylic paint in very small amounts) it still set up completely, it just took much longer to cure. Using resin-compatible dyes would solve this but I had to use what I already had on-hand. Additionally, this stuff is kind of sticky but that is to be expected of any product like this, and this product is actually very easy to clean up as long as it has not begun to harden. All in all, besides the lack of quality control regarding the instruction booklet, this two-part resin is great for small craft projects and repairs, and I'd definitely recommend it if you don't need a large quantity of resin. If you plan on using this kind of stuff frequently, I'd recommend buying larger containers.

Absolutely love this! It’s virtually bubble free and dries beautifully! Very low odor and easier clean-up (comparatively to others). I tried it on several molds using a variety of pigments, including chameleon, pastes, and alcohol ink. The results exceeded my expectations! I did buy the smaller bottles and, since it’s cold right now, I did place them in warm water - this really made the resin quite fluid and had minimal bubbles. Will definitely be buying more and recommending it to anyone who likes working with resin!

The bottle says the demold time is 4 hours, but when I demolded at four, it was extremely soft, like deforming under its own weight soft. However, demolding at 24 hours gives excellent results! Why not say to wait 24 hours? Despite the high demold time, it does have a really short work time. Be sure you have everything set to race to getting the resin in your molds once you combine the parts. After about 5 minutes, it gets so thick it's difficult to work with. By 10, you can forget it. However, once you ignore the instructions in the poorly translated booklet, this is a truly excellent resin. These dice, pressurized at 40psi, came out completely and totally clear. The short work time might cause problems if you don't have a pressure pot, though. Bubbles will get trapped as you stir like a mad man to beat the timer. If you're curious what mold I used in my example pour, it's from Druid Dice on Etsy. TL;DR, work time of 10 minutes, demold time of 24 hours pressurized, beautiful results.

No bubbles, very clear...but not fast curing at all! Not sure yet on the hardening quality yet but I was looking for something that would cure in a minimum of a few hours...not a few days!

السعر مناسب

لأنه حلو

Amazing resin very happy

Easy to use , excellent results , good quality and price

Really enjoyed