Crystal Clear Epoxy Resin Kit 16oz, Bubble-Free, Anti-Yellowing, Self Leveling Easy Mix 1:1 Coating and Casting Resin for Table Top, Molds, Tumbler Crafts, Painting, Jewelry, DIY Gifts

Awesome product. I bought this to finish my skinning project and the results speak for themselves. This epoxy not only was bubble free but it also played down very nicely. I will definitely be using this brand epoxy for all my projects moving forward. Cheers

The bottle says the demold time is 4 hours, but when I demolded at four, it was extremely soft, like deforming under its own weight soft. However, demolding at 24 hours gives excellent results! Why not say to wait 24 hours? Despite the high demold time, it does have a really short work time. Be sure you have everything set to race to getting the resin in your molds once you combine the parts. After about 5 minutes, it gets so thick it's difficult to work with. By 10, you can forget it. However, once you ignore the instructions in the poorly translated booklet, this is a truly excellent resin. These dice, pressurized at 40psi, came out completely and totally clear. The short work time might cause problems if you don't have a pressure pot, though. Bubbles will get trapped as you stir like a mad man to beat the timer. If you're curious what mold I used in my example pour, it's from Druid Dice on Etsy. TL;DR, work time of 10 minutes, demold time of 24 hours pressurized, beautiful results.

This resin mixes easily at a 1:1 ratio. It is very forgiving for beginners and has a long working time of around 45 minutes. It's relatively bubble free when mixed but I still recommend using a vacuum chamber if you have one for intricate projects. And it's relatively low odor too which is nice. So far it's held up well in jewelry and cast projects. And you get a decent amount for the low cost. Way cheaper than most local hobby stores have it for.

This product is crystal clear, it is pretty slow setting, so the bubbles release well, I did have a ton of fish eye when put on thin with a paint brush over fiberglass resin with a polyurethane top coat, not sure if that was incompatible or if it was the high humidity but that part didn't work well but where I filled a cavity it worked perfectly, but if you have to do 2 pours do them 4 hrs apart and don't sand, if you wait till its cured and sand it it won't come out as clear. Update It filled the sanding scratches and is just as clear as the first method. Would be 5 star if it leveled a little better on flat surface, but that may be my fault🤷‍♂️

First time using resin and success! I think lol .I didn’t get a thick cast I think bc I poured it over foam that you stick the faux plants into and maybe most of the resin seeped down into it but woke up the next day and the rocks were harden, not moving even tipped the plant upside down and none of them fell out the pot so I think it was a success. I just mixed the two bottles equal pours stirred for about 5-7 minutes pour ,it leveled itself out even seen some bubbles popping on their own and let it dry overnight the next day it was solid. Did not have a strong odor either

Love this for making jewelry. It’s easy to use the little bottles. It’s very easy to mix and use and it works well not a whole lot of bubbles so that’s a good thing.

It's O.K., for tiny/small hobbyist projects. I do not recommend it for large tabletop pours. Pay close attention to the lousy translation. Especially where it states to heat up the material to 176f degrees, or did they mis translate that!?! This product is Not “Fast Cure”. It is finicky for large areas like table tops. It tends to mottle if you are not careful as it is sensitive to the thickness you pour out on a large surface. Stick to U.S. producers for larger projects.

First time using this particular product. I purchased the kit because I needed the measuring cups, but beware, these cups are tiny. And they seem graduated so I doubt you can get a really accurate 1:1 ratio. The product itself is good, no odor, hardens quickly. But you have to buy measuring cups to be sure you have accurate amounts of both products.

السعر مناسب

لأنه حلو

Für das ich absoluter Neuling bin was epoxidharz betrifft, hat alles auf Anhieb geklappt ! Tolles Ergebnis

Amazing resin very happy

Easy to use , excellent results , good quality and price