Tyger Auto T3 Soft Tri-fold Truck Bed Tonneau Cover Compatible with 2019-2026 Chevy Silverado GMC Sierra 1500 (Not fit 19 LD/Limited) | 6'7" (79") Bed | TG-BC3C1054

Added this soft rollup Tonneau cover to my Silverado. I looked these up here on Amazon, checked out the reviews and found this to be the right one for me. I am impressed with this and the quality with which this is made and put together. The material is durable and well made and feels rugged. It is as secure as it can be, but went on well and tight and looks good. It is water and weather resistant however, will have to see what it looks like in a few months or years. The truck is in TX so hot sun and rain is a frequent thing and it'll show if lasts or not. Rolling up is easy. This was for 5.8 inch bed and the dimensions were just perfect. Instructions to install very easy. It ships in a large slim box. It comes with weather stripping. I used it to get it good seal on the cab end as it wasn't flush with the sides. I check for light leaks and there wasn't any except at one crease end but it looks like it'll work its self out as it gets stretched a bit and gets pliable. The mounting brackets/hardware was well made and worked with ease. Used a socket wrench and it was easy to tighten. Over all very satisfied with this and hope to have it last a while.

I bought this tonneau cover for my 2020 Silverado 1500 RST with 5'8" bed. It's my first truck and therefore my first tonneau cover, and I was looking for something of decent quality for a good price. I purchased based on the positive reviews and also have a friend who has one on his 2019 F-150. Let me first start by saying that when I placed the order I used the fitment verification on Amazon's site and it said that this product fit my vehicle. The product listing mentioned 2019-2020 Chevy Silverado / GMC Sierra with 5'8" bed. About a week later when I went to check the order status, I noticed that Amazon changed their product page to indicate that it only fits 2019 model. The fitment verification was saying that this product is not compatible with my vehicle. I was pretty annoyed by this, and I even submitted an inquiry at Tyger's website to find out for sure. Their reply was as follows: "This item is currently under our 2nd stage safety and fitment test for 2020 models, it will take a little time so we changed the fitment for now." Amazon did say that they would allow me to return it if it did't fit, so I decided to try it anyway. The box it came in did indicate that it fits 2019-2020 model years, so I'm not sure why Tyger back-tracked on 2020 fitment. I installed it today, and it does indeed fit my 2020 Silverado perfectly. Installation was a breeze, it took about 30 minutes. The cover appears to be made of high-quality vinyl. The frame appears sturdy. It snows where I live and I'm hoping it won't have any trouble holding up to the weight of a few inches of snow a few times per winter. The cover comes with a piece of weather stripping that is designed to go on the front edge of the box, immediately behind the cab, and prevent water from coming in. With the way the cover needs to be positioned front to back, I'm worried that there may still be a gap between the weather stripping and the rubber seal on the bottom front edge of the cover. If I were to do it again, I would place this weather stripping more toward the rear of the vehicle rather than in the middle of the front bed rail. I'll keep my eye on it and if I have to adjust it I will. I'll try to post a long-term update in a few months after living with it for a while.

Fits perfectly Silverado 1500 rst, very easy install, look’s great! Seems like it will be very durable as well.

super easy to install and it is completely sealed. Bought this for my 2022 Chevy Silverado. Fit the bed perfectly, and took me about 15 minutes to install. With the auto tailgate the bed is now very secure. It has a nice low profile look that really works well with the truck

Updated: Changed my review from 1 star to 4 stars - realized the problem with reaching out to support was my own fault. They are sending me a replacement safety clip Original review: I am mainly writing this review to get attention to some support. Overall I am happy with the product. Broken down into my Review, what's Weird, and my Problem... Review: The item fit my 2022 Crew Cab Silverado perfectly out of the box. Installation was pretty simple. It came with weatherproofing strips if needed, but I did not need them. The material of the top itself feels cheap and I hope it will last as there is no plastic underneath the leather/vinyl to support it. I am a little worried it may have trouble with the weight of snow but I really have no reason to believe it won't make it through this winter, it has handled weather (sun and rain) so far in the 2 months I've owned it. Weird: The install comes with "safety clips" at the front. When you install, you screw/tighten clips into the front of your bed and use hand lever clips at the back as you might expect (so, so far: held down by 4 clips at each corner of the truck bed). The weird thing though is that this cover also has also safety clips to install at the front of the bed. So, 6 clips total, 2 at each corner of the front of the bed, 1 clip at each back corner. I'm not sure why this would be needed - is the manufacturer worried that the front clips will fail so they've added an extra set attached by a rope to keep your cover from flying off??? Problem: One of the safety clips was over drilled from the factory. So when I went to screw it / clip it onto my bed the screw wouldn't bite. I thought I'd be able to get a replacement safety clip so I've reached out to support about it, but they have not responded. It has been about 10 days. I'm otherwise happy with the product (it is as expected for the cheap price) but no support hence 1 star review. Would be happy to update the rating if I could get some support.

I've only had it a little over a month. It came packaged nicely and was very easy to install. I had to install a foam rubber strip (included) along the cab rail. Line it up and tighten the clamps. The quality seems really nice and it was reasonably priced. Very pleased

Bought this for my 2024 Chevy Silverado 1500 Trail Boss with the 5'9" (69 inches) bed. Initial thoughts: It was well packaged, arriving in a well sealed box. Opening the box the entire cover was placed in a nice bag. Once the bag was removed, all the parts were folded up neatly into the cover. The front and back clamps for the cover were already in place and the only extra parts that were there were the weather stripping for the front of the bed (there were 2 included since some people complained about the thickness and not getting a good seal), extenders for the knobs, and pads for clamps where they contact the side of the bed. I did not use the pads or extenders for my installation. I unfolded it in my kitchen and inspected the parts and the function prior to watching the installation video (just google Tyger Cover and look for your version, mine was the T3). A short video showed how to line it up, install the front clamps and safety hooks, and then the back clamps. I did the entire installation in about 20 minutes, including putting down the weather strip and lining it up and securing all the clamps. Installation was very easy and it fit nicely in my truck. Overall it seems well built and should suit the purposes I wanted for now, that being keeping anything I throw in the back dry and keeping the snow out of the truck bed in winter. Clearly, this is a vinyl cover and will not offer any sort of security, so if that's a concern, this isn't the cover for you. *** Some of the things I had very minor concerns about but not enough to dock it any stars (given the price): 1). Where the unit folds, the vinyl is out of shape, and you can see the 'hump' looking at it from the side. I'm hoping that over time this will relax and become more flat. You might be able to see it in one of the photos. 2). One thing that I don't like personally, is that you can not fold up the last section. So, in order to get access to the whole entire bed, you have to basically take it off completely. The clamps for the front part don't allow you to fold up the entire cover against the back window like some others do. I don't see this as a major issue, but if you're constantly loading large items that require full bed access, you'll have to take this off completely to do so. 3). May not be a concern yet, but I wonder if it will be in the future - The knobs are plastic and felt like they might snap if you put too much pressure on them or if you use them on days when it's extremely cold. Maybe they'll be OK, but during installation, I could easily tell that I could snap them if I forced them too tight. In general, I'm happy with this purchase and I hope it lasts a while, until I can afford to upgrade to a solid one that can hold some weight. For now, really just wanted to keep my items in the back dry, and keep the weather out of the truck (plus it looks nicer).

Easy to install. Low profile is nice. Seals well with minimal leaking. Fit a 2021 Chevy Silverado crew cab. Holds up

Easy to install and looks good. Hasn’t rained yet, so don’t know how well it will hold back water.

Price and ease of installation was important in this purchase and it was knocked out of the park.

Came quickly and was easy to install. Hopefully it will last. Only time will tell.

I like the tonneau cover to keep my stuff dry and out of weather

The gap for the foam at the front of the cover, the foam supplied is too thin, needs to be doubled up to seal properly. ( Minor issue) mine fell out a day after install. Only other thing is the tension blocks are stuck. Fit and finish are excellent!