LG 6877ER1016B Geniune OEM Washer Multi-Wire Motor Harness for LG Washing Machines

Worked well.

Easy to install. I highly recommend youtube to find a DIY video.

Fit perfect my LG washing machine for the fraction of the LG part! Recommend it!

Perfect replacement part. Solid build quality, worked immediately.

It’s the exact wiring harness I need, but the length is an issue! The connectors are an exact match, but the end that connects to the motor and hull sensor are a little too short. Specifically the wires that go to the motor! The original wire harness is about an inch or 2 LONGER on that connector, and this part the wires for the motor are the same length as the one for the hull sensor which may be a problem!

My LG washer WM4270HWA often reported the LE code (loading error) since day one. I didn't pay much attention and thought it was just because of unbalanced loads. After 7 years, it finally gave up and can't even run an empty load. The LE code is persistent now. After watching some Youtube videos, I decided to take a shot by replacing both the sensor and cables. It wasn't hard, you just need to take some pictures before disassemble every component. The hardest part was actually moving the washer/dryer. :) It worked perfectly and saved me hundreds of dollars, but more importantly the hassle of scheduling appointments and waiting for the parts.

When you get this wiring harness there is a screw down zip tie missing for the wires that connect to the rotor position sensor, but since the wires are a little shorter, you don't need it. The wires rest flush up against the back of the tub. I purchased this and the rotor position sensor and that fixed the problem with the drum not wanting to spin or barely spinning and making noise. Since these are the cheapest two parts, I would start with them. I would also spend the extra money and purchase the real LG wiring harness and rotor position sensor. The rotor position sensor was $22 and I know you can get it cheaper but I went with the real LG sensor and this wiring harness was the cheapest at $23. The motor stator assembly looked fine that the sensor plugs into and the splines on the rotor assembly looked good too and there wasn't any play in between it and the shaft. You can buy the center portion of the rotor assembly if the rest of it looks fine and save a lot of money.

I elected to replace the wire set at same time as the hall sensor. This fit my machine perfectly and worked as it should

Every thing fit great no problems with the connectors or the length of the harness

Item came on time. Easy to install. Washer is currently working. Saved me money. Thank you.

Arrived ontime but did not need, only a sensor issue...

Easy to install, good price!