DEWHEL Billet Aluminum Throttle Bushings Compatible With BMW E30 E34 E28 E39 E36 M20 M30 M50 S14 M60 (Silve)

initial impression was looks Qltyfit on TB was loose, about 1.3MM gap, used a modified crushwasher and still a bit loose but acceptable. reset Tb cable and off to the dyno and then track. there was all together 3hours on the NEW engine with the TB bushing and we didnt have full throttle. theres no jamb nut or rubber to stop it from loosening. track side I used duct tape to hold it in place but will need to find a nut. would spend more money if the Quality was good, this is a $10 part or less to me...not worth the $20 spent for the pair unless your ready to play with it out the box

Came in an open bag, snap rings were nowhere to be seen; hopefully I can find the same size at the hardware store. Either way the threading on them needs to be chased, they're not going to thread in well without re-tapping and some filing.

Did not come close to working at all on an E34Wasn’t even close

Great product! Fixes the rotting or ripped cable grommet with a solid, but removable fix.

Poor fitment. Circlip groves are extremely loose

Easy fix for broken throttle bushings on my e39/540i. There is some play however, theres a gap leftover between the mounting bracket and the c clip (about 1.5mm) may be softening throttle response a bit... possibly fix with a custom washer

Fit well. They also look good

Big upgrade from the OEM set up