CHICAGOQuad Roller Skates for Girls & Boys – Durable, Top Performance Indoor/Outdoor Use or Roller Derby - Classic Deluxe Leather High-Top Boots with 60mm Urethane Wheels & Semi-Precision Bearings

Got these to get some aerobics going. I used to speed skate for miles at a time and have had several pairs of skates and was picky about the wheels and bearings.At this price point I was skeptical as to quality. The uppers are a bit on the cheap side. Yeah, they are made with leather, but I have no Idea how they got it so thin over the top of the man made material. It’s not horrible but definitely the worst part of the skates.That said, the trucks are solid, the bearings good to better, and the wheels decent.I have extra wide feet so I ordered one size up. That worked well.Overall they are a great value. They really perform well.

Why did you pick this product vs others?:My husband is almost 50 years old and when I tell you this is the happiest I’ve seen him in a long time about getting a present he loves them he has been skating everyday with them even got new wheels 🛞 not because there was anything wrong he had to have street wheels and wooden wheels for inside great quality size fits perfect true to size very comfortable and durable there going to last him forever.

Purchased a size 13 for my husband, he is 6'7 280 lbs, the comfort is great, good ankle support but a little stiff, needs to be worn a couple times to break them in, recommend wearing long socks not short or ankle socks, fit is perfect for a narrow or normal foot size,might not be comfortable for a wide foot, good for indoor skating, padding was good, true to size, the only thing he said he would change was the wheels to something that would allow him to go faster, the ride is smooth with the stock wheels. otherwise it's a great skate for anyone and a great value and quality for the price

The media could not be loaded. Price Note: There is another pair of Chicago skates just like these for ~ $20 less but they DON'T have a leather / suede liner. These are better made and become more comfortable with use as the leather shapes to your foot.Will these skates wear-out or need replacement in three months? NO WAY! Since Jan 2019 as of today July 2019 I have skated over 80 hours in these skates and can now skate backwards on 1 foot for almost the entire rink! I did replace the wheels, toe stops, and bearings.Remember the biggest factor in your skating ability is YOU not the skates. Don't take my word for it go to youtube and watch this amazing skater switch from his ~ $400 skates to rental skates. He can still do all the same tricks and it will blow your mind to see him do it in beat-up rentals!"I tried rental skates again after 3 YEARS!" - By Skate144, Published on Feb 16, 2017So get out and SKATE they upgrade when you understand what type of skating you like and you know what you really need and even if you spend $200 - $600+ it is worth it IF you skate every week AND support your local rink IF you are lucky enough to have one. I spend $10 every week at my local rink Skateworld in San Diego and it is worth every penny.Now for the review of the Chicago skates...OUTDOOR skating: They come with soft but durable standard 78 hardness (durometer scale) polyurethane wheels.The wheels / bearings are slow which is good for learning and beginner skaters.What should you modify?1. Wheel nuts - loosen them so there is a very slight bit of side to side play. Don't do this until you are confident and ready for more speed. Slow wheels are easier to learn on but you will get more tired as you don't glide as far.2. Trucks - may be too loose or too tight this controls how much the skate will "steer" think of the front wheels on a car. In the beginning you want them firm as you improve you gradually loosen them so the skates turn / steer easier.3. Toe stop - low quality use it until it breaks the way mine did and replace it. I got the Sure grip brand for around $15?4. Bearings: Don't replace them until you skate for at least a few months then save them for outdoor skating. I applied a few drops of paint thinner (you could easily get or already have nail polish remover which is acetone) for this purpose then apply a few drops of WD-40 which is over 60% solvent which will thin the grease. Result? HUGE increase in speed and the wheel will spin freely for about 20 seconds! When you are ready to upgrade "Bones Roller Bones Bearings" BLACK for $20 for 16 bearings (enough for both pairs of skates) OR Bonz REDS or REDZ? $40 (2x the price but they are faster).5. Recommend but not necessary leather"Toe protectors" Good indoors and outdoors and only costs $15.INDOOR Rink Skating (wood floor):1. All the same steps as above BUT you MUST replace the wheels with a harder composite I choose "RollerBones Team Logo 98A Recreational Roller Skate Wheels (Set of 8), White, 57mm" which have a hardness of (Durometer 98). Any brand will do but you want 57mm & 90+ Durometer hardness. Also, don't use skateboard wheels. I tried 101A hardness and 52mm but on skateboard wheels the hub is thicker and the wheel nut will stick out and can cause you to crash. I came from rollerblades and NEVER changed my wheels (rotate and clean but never changed) I though the same would apply to roller skates but when you skate on wood the 78 hardness wheels are WAY OVER GRIPPED and it hurt my knees because of the resistance and if you are slightly off in you foot placement it will send you crashing to the floor.However, this adds around $40 to the price of the skates which is why I recommend for INDOOR skaters you at least consider "Riedell Skates - Angel Junior - Artistic Quad Roller Skate" $135 as these skates $65 + $40 (wheels) = $105. Now the Riedell have a plastic plate but **IF** you crack or wear it out you will know what type of skate/ brand/ wheels/ etc you really need and these skates can be retired to outdoor or you keep them in your trunk etc.Fit & First Skate: Jan 2019I wear size 10 and found the skates were just right with room for thick skate socks. The leather liner felt good and even with 1.5 hrs of skating my feet felt fine - not bad for breaking in a new skate. The boot is very soft so you need to lace tight for support. Some high quality skates have a soft suede boot and some have a rock-hard ice skate style boot. Either works it depends on you need for ankle support and skate style.See the photos of my current setup. Note I only use these skates indoors at the rink and I have a cheap pair (last picture of Chicago Derby (Jam) skates that I use outdoors. Total skating is over 50 hours as of the date of this picture.

The wrench they provided to adjust the nuts was very weak and bent all up on the first turn...you really have to invest in a good nut tool so you can adjust the factory torque on those nuts. When I got my skates, the trucks were super stiff and all the way tight and it was hard to take turns on the rink. It took me days just to find one that was suitable, but I did find this one:https://www.amazon.com/gp/product/B00HBRPZSC/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1As for the skates themselves, they feel good. I can stand straight without rolling off like rental skates where I am slipping all around on them.I felt much better in them than the rental skates. But you do got to adjust everything because everything is tightened all the way down. So far I like them and the way the look is basic black and cool! We shall see if they rip in the back like some reviews were saying. I sure hope not. I hope I don't have to upgrade to Impala skates or something.

La mejor compra, awesomeLos volveria a comprar una y otra vez

Love these. Great for beginners

Cheaply made had to replace the bushings straight out of the box!