Danco (39619) Bathtub and Shower 3-Handle Remodel/Rebuild Trim Kit for Price Pfister Verve Faucets, Includes 12H-2H, 12H-2C, 12H-18D Stems, Knob Handles in Chrome, Pack of 1

A fresh look for an old shower setup This Danco 3-handle trim kit turned out to be exactly what my older Price Pfister Verve shower needed. The chrome finish instantly refreshed the look of the bathroom, making it feel brighter and more modern without the cost of replacing the whole valve system. The kit came with the stems, seats, and knobs, so everything I needed for a full rebuild was in the box. Installation was straightforward—if you’ve done basic plumbing before, it’s not too complicated, though a seat wrench makes the job a lot easier. The handles turn smoothly and feel solid, not wobbly like the old ones. The chrome finish has a nice shine and so far has been easy to keep clean. I especially like that this saved me from having to open up the wall and change out the entire faucet body—this kit truly extends the life of an existing setup. Things to keep in mind: the knobs are plastic with a chrome finish, not metal, so while they look nice, they don’t have the same heavy feel. Still, they’re perfectly functional, and for a high-traffic rental bathroom or a quick refresh, they work well. Bottom line: A cost-effective, complete kit that gives an old 3-handle Price Pfister shower a new lease on life with smooth operation and a clean chrome look.

Top quality, performs as supposed to. You can't ask for more than that.

Stems were longer than my original but the trim kit and handles fit perfectly. Handles feel cheap but does the job. Stems were leaking when I first used them, had to tighten the hex to tighten the packing, no leaks after. Good value and no more leaking shower head.

I’ve bought and installed 7 of these. No complaints. I will be buying more of them.

Product was excellent , everything fit perfectly and it took care of 2 leaks and a horrible noise. But I do have 1 minor complaint the center caps are loose. The hot cap falls off repeatedly when used

It lasted 3 years, hate to replace these things ... too much waste of time

I'm going to speak for southern California's VERY hard and chemical-filled water. You need to replace knobs and faucets every two years- max. You will see how the water eats away the finish on your fixtures before that- but what you don't see on the outside is even worse. The crusty hard buildup adds up on the inside, and once you get to the point where you have a drip you can't shut off no matter how tightly you turn the knob, you have a big problem awaiting you on the in there. But first, you will have to take it apart- and good luck with that! Your center screw will probably strip before it turns, no matter how much CLR or WD40 you prime it with first. EVERYTHING gets fused together, mostly with the calcium, flouride, and lime buildup. You will probably need to drill the screw out. Then, you'll still have a big struggle to seperate the parts. You'll be hitting it, trying to crack the hard-as-rock sediment apart. And you will need an L-shaped tool that isn't in the kit- Home Depot will know just what that is, so buy it and save it for future replacement jobs. You might want to just hire a plumber at this point, because you'll be frustrated, and your hands and arms will hurt. **Next time, change out everything yearly!** Before this happens, because it WILL. Aside from all that- this set is universal for all the 3-knob (hot, cold, and twist-up diverter in the middle) bathtub faucet sets. Most of us will have no idea what brand we have, but if it looks like this, it's probably the right set. My place was built in 1978, that's all I know. I've had to replace these in my 2 bathrooms many times in 24 years. I always wish I hadn't waited so long. If you do it regularly, it's easy to do and you won't need a plumber. Just put the parts together in the same order they are in when you take the old ones out (if you can still make out what that is!). And don't forget to turn off the water to the house first!

I spent 4 hours messing with this junk and I am very experienced with things like this, being a General Contractor. The initial installation went just fine. It took 20 minutes, and then the fun begins. The hot side was leaking immediately. I took it apart and put it back together multiple times, using different combinations of washers and valve seats. My original valves did not leak. The diverter valve was bad. After all this time messing with it, I ended up driving to the hardware store end getting some more parts. I replaced the valve seat and I replaced the flat washer with a conical washer, similar to the original washers. That was the key. The flat washers that come with this kit are not like the originals. It’s typical shortcut manufacturing from the biggest manufacturing country in the world I don’t recommend and I wouldn’t purchase again.

Works great look good

Excelente producto, las llaves son de metal de muy buena calidad. El envio llego a tiempo.

Easy to install in the shower. Package as described and good quality. The stems weren't required, but will come in handy down the road!

To remodel our bathroom shower it was a product we used before so we have knowledge of the brand rust proof and lifetime warranty Quick delivery and on time. If you need your money with this product is the best.

Worked very well with Pfister three handle rough in.