Hydrothermal Synthesis Autoclave Reactor 25ml

It is very good well-machined and fit the specifications

Fully satisfied with the quality and cost

A very well built and inexpensive hydrothermal reactor. I tested it with water at 220C for > 24 hours, worked great. Used for supercritical solvent extraction with PTFE compatible polar solvents, worked great.

Function: I have tested the vessel on leak tightness by filling it with 20 ml water and leaving it overnight at 150 deg. C (above boiling point water). Weighing the vessel before and after showed a decrease of only 0.1 %, Conclusion: leak tight. Form: the screw thread in the metal screw cap required some deburring; we also put some Teflon tape on the plunger screw thread to prevent blockage after use at high temperature. Conclusion; quite happy with this vessel at a very attractive price compared to top brand alternatives.

This was purchased for a research lab at a major university. It functions as expected and is a good product. Came on time and was packaged well. Happy to recommend!

Used it for the synthesis of crystalline material with Hydrothermal method. Works good so far.

I used this for a hydro-thermal reaction, and over a handful of experiments it has performed as anticipated and was easy to use. The original packaging was challenging to remove.

good to use till now