Eyeglasses Nose Pads, 15 x 8mm Screw-in Nose Pads for Glasses

Can’t believe I didn’t know about these sooner! I don’t see the need to replace my glasses now. My original nose pads were bad and made me start to dislike my glasses. This is definitely affordable if your nose pads are starting to look dirty (or are). The grip definitely feels better and I don’t have to keep pushing my glasses up. I also love how this product came with a flathead or screwdriver. The two types of padding to choose from is great! Definitely recommend and it is so easy to replace.

My latest pair of glasses came pre-installed with two obviously cheap, low-quality nosepads that were both (a) made of rigid, too-stiff plastic, and (b) so poorly molded one of them had a sharp edge(!). Not very surprisingly, one of them developed a tear in the ring around the retaining screw and broke off, so less than a month after I got the frames I ended up having to salvage the pads from my PREVIOUS glasses to install in my new pair. Those were much better-made, but still uncomfortable and they have a tendency to irritate the skin on the bridge of my nose, so immediately after making the temporary repair using my old pads, I also placed an order for these. The kit consists of a generous supply of both nose pads, a new retaining screw for each and every pad, and a small keychain screwdriver. The screwdriver is worthless. Don't even screw (no pun) around with it. I'm not kidding. The moment you open the package, just take out the screwdriver and throw it directly into the recycling bin. It's not what you're buying this kit for. You're far better off investing in a good, full-sized jeweler's screwdriver that fits comfortably in your hand. Actually, if your current glasses use slotted screw heads, you'll need two screwdrivers. The screws that come with the kit are all Phillips-head, which is MUCH more convenient. Since you get one screw per pad, honestly I recommend always replacing whatever screw was previously installed with a brand new one from this kit, every time you install one of the pads. Especially the original slotted screws, pull those out right away and chuck them into the recycling directly behind the cheap "screwdriver". The screws that come with the kit are very good, the only reason not to use them would be if they don't fit your frames for some reason. The pads are even BETTER. They seem strong enough not to tear with normal use (at least in my experience so far), despite not being made of solid plastic like all of my previous pads. These are actually hollow, with a center air cushion that gives them a springy softness I can only describe as "pillowy". It makes for unquestionably the most comfortable fit I've ever gotten from any pair of glasses. Skin irritation and even occasional blisters are (at least so far) no longer a problem. And that's something that, after pair after pair and year after year using cheap, uncomfortable factory pads, I'd convinced myself was just a normal side-effect of wearing eyeglasses.

I bought a pair of almost perfect sunglasses, except for the nose pads were metal. I bought this to replace them and other than the flathead not being small enough, the small nose pads were a great fit and replacement for the metal ones. Now the sunglasses are perfect!!

After a few years your glasses nose pads will get brittle and even break off. These nose pads are excellent. Fitment was outstanding and the price was right. It comes with everything you will need to replace the pads as well. 2 different style pads, several of each, and extra screws, and even an extra small screwdriver is included. I do recommend purchasing a quality set of tools for working on glasses though, but I'm a pinch, the ones included will work just fine. The pads are soft and flexible, since they're new, do it's like having new glasses again. I can highly recommend this nose pads replacement kit

On glasses a original broke off. Unfortunately the screws were flat head on the frame. These came with a few hard plastic. With Philips screws. The screw driver is nice. Replaced both with the soft silicon nose pads and Philips screws. Of course you need old glasses to see to put in the nose pads and screws. Put a eyeglasses cleaning cloth on top. If screws are tight and dont seem to wanna come out. Screw them a little tighter. Then unscrew them. If you have flat heads already in? Replace with ones in the package. Go ahead and replace both pad. I definitely recommend the silicon that are separate from the ones with screws. That screw driver has Philips on one end and flat head on the other. Unscrew from keyring and the end peice. To make the actually screw driver. Both are the correct size for screws that are for glasses. The screw driver can come in handy for other stuff. Such as a battery plate on a scale. For example. You cant go wrong with this package. No need to spend more. Unless you work on glasses all day. Needing the big trays.

...the little replacement screws absolutely would not thread into my glasses. I suppose there is a more common thread size for most of those little screws, but apparently, they aren't all interchangeable. But, if these companies, who manufacture these replacement kits, were on the ball, they would make those little screws a little longer, and then taper them slightly, with self-tapping threads Bingo! Problem solved! But as it was, I ended up just capping the top of that tiny screw, which was sticking out about a millimeter or 2, a gob of superglue over the top of it. And hopefully, that will at Least keep the little screw from falling out. (sigh)

Easy to install, and it came with different sizes and thicknesses! I got to save a lot of money replacing the lost nose pad on my sunglasses

Saved a $400 pair of my favorite glasses. I put the glasses on my hat when I need to see a putt or just lining up a shot. Apparently when I pulled them of my hat the nose pads were torn off. I was extrmely upset. Went to the dealer, they said have to order part it will be 3 weeks and costs$$$. I found these soft, versatile perfect fit on Amazon. I got several pairs which worked out exactly correct. and a screw driver that doesn't fit the screws but I only needed the pads. All for about $5. Perfect great value.