Narex 863600Chisel / Mortise Chisel Set - 4/6 / 10/12 mm - for Mortises

I am an amateur woodworker. I bought these to make mortises in some 4x4 timbers that would become my workbench. While my work isn't stellar (okay, it's all a bit crooked), these performed exceptionally. Nice, clean cuts with easily controlled precision. A very satisfying experience. I was able to cut 4 mortises in about an hour, and I was taking my time. The tools look nice and are evidently well-made. They feel nice in the hand and take a good strike very well. If you've never used a cheap chisel before, there is a very unpleasant sensation in both hands when a mallet strikes a bunch of cheap wood and metal. It's like striking a stone with a shovel. These absorb a modest blow and drive straight. I did have to sharpen it somewhat quickly after the first use (I used right out of the box as they seemed plenty sharp to me), but once I honed it, it kept the edge for a surprising time. My only complaint is that there was no storage included, but that's mostly because I haven't fashioned a way to store them yet. I suppose if they'd included a bag or roll for them, once I had a place to store them I'd get rid of whatever they sent anyway, so who cares. An excellent value that immediately upped my workshop capabilities.

These chisels are excellent, definitely makes morticing easier that using my usual bench chisels. They were sharp and square out of the box, just gave the edge a light polish and was on my way. The only issue I had was that some of them were sharp all over - ie the non cutting edges were sharp enough to cut my finger on while holding the chisel. This was quickly remedied with some fine sand paper to knock down the machining burrs on the corners (and a little superglue for my finger) then straight back to work. I've had great luck with Narex chisels over the years and will definitely look at their offerings first if I ever need to expand my collection in the future.

Great chisels, I have tile full set of flat chisels as well, unreal quality!

These seem to be a great value; please read the full review for a cautionary tale. I received the set of mortise chisels, and within an hour I was chopping out a 3" deep mortise in maple with no real issues. The backs were all close enough to flat that it didn't take more than 5-10 minutes lapping (longer on the largest size ) to get them dead flat polished. I haven't used them extensively as of yet, but they took and held a sharp edge well. One word of caution; the machining seems to leave ALL edges moderately sharp. This applies to every corner and edge of the chisel and shaft, not just the cutting edge. I'm not sure if they weren't deburred, etc., but I did put a very even set of slices into my index finger while lapping the smallest chisel as the top edges of the shaft were sharp enough to cut with moderate pressure. I took a break to quickly knock the non-cutting edges down with sandpaper and didn't have any more issues but I would absolutely recommend taking the time to ensure you don't slice your hands and fingers while lapping the tool right out of the box.

I had been chopping mortises with myinexpensive bench chisels for a long time and always had problems with the chisel turning during the cut. I bent one of them trying to clear the waste. I bought Narex bench chisels and they worked a lot better, but would still sometimes twist in the cut. These mortise chisels virtually eliminated both the turning problem and the bending problem. They're fairly sharp as received, but I flattened the backs and sharpened them as I would any new chisel. They cut mortises with cleaner sides and there's no danger of bending one when you lever out the waste. These chisels stay sharp too, and leave a shiny surface on the end grain of each cut. I would recommend them to anyone wanting mortise chisels that are reasonably priced and do a great job.

Never used mortising chisels before. I have a project that I would need to mortise. Was not going to spend the money on a drill press mortising chisel ( not yet anyways) so I decided to try these out after reading all the previous reviews. Chisels, along with the Bora mallet arrived like the next day. Tried them out and could not believe how doable it was using these chisels. I do not know how to compare to more expensive chisels and what actually constitutes a superior chisel, but for me these chisels are awesome. Sharp as a tack. Have already completed two mortises and have several more to go. Next step is to learn how to re-sharpen though no issues to this point. Would prefer to buy USA but in this case do not mind helping out a good ally.

Seem to be well made chisels for the money. Need some work out of the box however, they are still decently sharp and do not require much work to get them right. The handles are well made and built to last. I am totally pleased with this purchase.

Pretty sharp out of the box due to good Milling processes. It took about 10 mins per chisel to flatten the backs and polish the bevel using diamond plates. Bevels were square and perpendicular to the sides. Something that caught me off guard was how light the chisels are in comparison to others I have used. I had concerns that maintaining a bevel would be difficult but they have worked well. First task was cutting 4 mortises at 2.25" x 4.5" x 3.5". A quick polish of the bevel between cuts provided a super sharp bevel that cut well and dug deep with light strikes from the mallet.

had to own these

Gayet keskin, kalın ve sağlam, sadece ucu değil, kenarları bile kesiyor, denge elinizde de iş eldiveni kullanın

Great set of chisels and not a bad price either

Klasse Werkzeug.

Scalpelli dedicati per mortase, consentono di fare un difficile lavoro di scavo, la loro geometria e massa sono essenziali per seguite gli angoli. Se non volete un set completo (io ho preso quello da 4) e volete comprarelne 1 per provare preferite uno di taglia piccola 0,4cm è quello che uso di più.