Hayward Super Pump InGround Pool Pump - 1 HP, Quieter Operation & Efficient

Perfect pool pump. I have a farely large pool and this pump is doing an excellent job. No issues, runs quiet and the connection was easy!! Highly recommend!

Simple to connect, very quiet. Great pump to replace prior model.

I installed the pump without any issue. At the suction of the pump, I have installed a short piece of clear pipe. And I can see if there are any air bubbles at the intake. It takes about one minute for the pump to prime, and it then pumps a large amount of water. When I look at the transparent lid, there is a significant air pocket. When I look at the swimming pool, there are a lot of air bubbles coming out of the discharge pipe. So obviously, there is an air leak from somewhere. When I look at the transparent suction pipe, I don't see any air bubbles. There could be a small air leak in the suction pipe, but if it were a large amount, I would see air bubbles in the transparent section of the suction pipe. So, the air leak must be coming from the pump itself. At first, I thought that the gasket was missing, and that I somehow threw it out in the packaging. So, I ordered another gasket. When I received it, I discovered that the gasket was actually in place. I suspected that the leakage was at the cover of the strainer. In order to find the location of the air leak, I ran the pump to remove as much air as possible in the filter. Then I turned the pump off and closed the suction valves very quickly. This meant that the pump was filled with water (except for a small bubble at the top of the strainer basket) and was under the pressure of about 2 feet of static head (about 1 psi). Then I looked at where water was dripping out. There was no leak at the gasket to the strainer cover, so the gasket was good (this was a pleasant surprise since I thought that this was the problem). There was a leak at the drain plug. I determined that it had not been tightened at the factory. So, I removed the plug, applied Teflon tape, and tightened it. There was another leak at the threaded pipe at the inlet (suction). When I installed the pipe, I used Teflon tape as directed in the instructions. However, it still leaked, and Teflon tape was not good enough. I tried to seal the leak with caulking. However, this did not work. So, I removed the threaded pipe, applied Rectorseal Pipe thread Sealant, and reinstalled the pipe. This sealant has Teflon fibers imbedded in it and is not the same as regular pipe dope. After this was done, I re-tested the pump - there were no leaks and the pump worked perfectly. Comment: If you have a problem with leakage and the Teflon tape does not work, use Rectorseal. Comment: the pump instructions should explain how to find leaks in the system. This entire process took me several weeks and caused great frustration.

This was a purchase of a Hayward pump to replace an and existing broken Hayward pump. So it was plug and play. It’s a great pump.

Box came a bit beat up. Packaging and shipping needs work. Thought it might be broken but nothing wrong with the pump.

So far, it’s working great. Stays relatively cool, super pressure, very quiet. Customer service was fantastic as always. I have used them for years and they’re still as good as they claim to be. Look around, hard to beat.

Quick delivery, good product. Had our pool up and running with minimal down time.

Installed 12/24. 12 month warranty. $ 750.00 06/26 Plastic pump housing became porous with several leaks. Company referred me to dealers. Dealer said you are on your own. Approx $800 to fix. No support from Hayward and cannot talk to a real person. STAY AWAY Zero Stars

Exact replacement for my Hayward pool pump at a much reduced price compared to local suppliers. Used for one season without any issues.

Living in a small town my choice is limited but this one was at a much better price than any big city. Is fairly quiet and has work great so far, one season so far

We received the pump quickly but the wire to connect it was cut so short that we had to open the unit up and solder new wires onto the small stubs in order to connect it.

Pump looked ok, however it was mailed in a beat up box that said Dartboard kit on it and barely had and interior packaging so it was loose and sideways when received. Returned it, was shocked how poorly it was packaged considering it was an expensive product

15 ans de satisfaction avec cette marque.