VONETS Mini WiFi Bridge Ethernet/Wireless Repeater RJ45 to WiFi adapter convertor for DVR,Electronical Scales,PLC,IP Camera Network Devices

Brilliant little dongle! Bought this when we moved the BT youview box up into the bedroom, as you may know the youbox a wired internet connection and though i would give this a try. Powered by the USB socket on the back of the box and it works a treat. Really simple to setup even for a novice with networking experience, instructions aren't the best but can make out what to do, even a simple youtube search will give a clear video on how to do it. I have tested this for amazon prime streaming and so far it hasn't missed a beat. My router is sat in the living room and we have a solid brick built house so would expect some buffering but so far nothing! Have had this setup for a little over a month. Would recommend if you are looking to get over any hardwired issues and have limited plug sockets at your disposal!

Very simple to setup and use. Used in bridge mode to connect a remote switch to a WIFI access point (hotspot) Also very helpful was that the power USB connector can be removed to allow running on12v DC which was the only available power source available in the remote location.

Great item for networking Ethernet-only devices to WiFi networks. I use them mainly for large photocopiers so they only require a power socket where they are to be located. Pity they only work on older 2.4Ghz WiFi networks. Small enough to be fitted discreetly to the back of the copiers. Very reliable. instructions not the best.

Interesting experience setting it up, but once running it does seem to do what it’s supposed to. I never did figure out how to reliably get to the setup page, but I succeeded several times. I guess there’s a way of listing the possible WiFi hosts, but never worked out how to get it. I think I set it up by giving it a factory reset; then I built up the list of approved SSID’s. I had a look at a few YouTube videos, including ones from Vonets themselves (I think), but didn’t find out how I could enter setup for a unit that’s already configured, find out how it’s configured, and then modify the setup. There’s much scope to do a better job with YouTube tutorials. My requirement is to grab a WiFi internet stream & deliver it to a free standing analogue telephone adapter & thence to a traditional analogue phone. I was hoping for a one box solution, but this, together with an RJ45 VoIP ATA solves my problem.

Worked well at first attempt, reasonably straight forward set-up from my iPhone although had to don reading glasses to see the text on the screen, similarly with the "Instructions" booklet. Website has a lot of good documents to help too if you need it. First time it had to re-boot it did seem to get stuck in a loop but a power off and power on sorted it out and it came back on with all the changes applied. I went on to update its firmware and it rebooted without issue on this occasion and all settings were intact and the device fully functional. For the modest cost, this little device is really pretty good. This is just day 1 so let's hope for years of trouble-free service!

I’m no IT novice and are fully set up my home Wi-Fi network including bridging However I spent two hours trying to get this to work with no luck The instructions are virtually non-existent, Expecting you to rely on a YouTube video Extremely disappointed especially as so many people say they have got it to work correctly I’m sure the product does do the job, however incredibly poor instructions mean I wasn’t able to configure it correctly

I am using this, along with some cable extenders/couplers to extend the WiFi into the garden. I'm using an RJ45 input that's coming from a powerline adaptor, and pretty much just had to plug it in then work out the correct website link to configure it a little and to change the SSID and password. I had to go to a Vonets page rather than an IP address link, and ensure my laptop was on the same network as the bridge, which was a little confusing but nothing too taxing. I gave the SSID its own name so it's a secondary network, so other devices don't get confused and it works nicely sending the WiFi signal out at least 8m into the garden. I'm now able to use my smartphone in the garden, and have been able to have an Echo Dot out in the garden to use Alexa (using a battery pack too and making sure the Dot was on the new network). Really happy with how this has worked out and how easy it was.

Bought this to connect my cctv dvr to my virgin media super hub via WiFi. I esed the USB port on the front of the cctv dvr to power the unit and plugged the rj45 into my laptop. ( ethernet port ) turned off the wireless connection on my laptop and opened my browser then typed in on the on the top search bar 192.168.254.254 enter. It brought up the home page for the device and I configured it to search for hot spots ( my virgin media hub ) entered the hub password etc then opened the WiFi repeater tab and clicked on the appropriate tab to connect to the Internet. It stated connected and I logged out. Then unplugged the rj45 ( ethernet plug ) and plugged it into the back of the cctv dvr and went through the cctv systems set up feature and hey presto it's connected to my hub via WiFi. Remember to use the USB on the cctv dvr to keep it powered do not unplug it. Its working great. However s little knowledge of setting up routers would be an advantage.

Funciona a la perfección

Ich persönlich bewerte das Produkt wie folgt und verfasse am Ende noch ein Fazit: 1)Qualität & Verarbeitung: 5,0 von 5,0 2)Preis/Leistung: 5,0 von 5,0 3Funktionalität & Benutzerfreundlich: 5,0 von 5,0 4)Design/Optik: 5,0 von 5,0 5)Lieferung & Verpackung: 5,0 von 5,0 Fazit:Ich wollte mein 3D Drucker WLan verpassen, da er weiter weg von meinem PC steht und ich kein langes LAN Kabel durch den Raum ziehen wollte und da kam die WifiBridge sehr gelegen.Die Qualität und Verarbeitung der WLAN Brücke ist sehr gut und die Einrichtung war kinderleicht. Die Brücke selber lässt sich auch problemlos verstecken, sodass man Sie nicht direkt erkennt.Ich habe trotz mehrfachen an und ausschalten des Druckers keine Probleme damit das Sie sich automatisch wieder ins WLAN verbindet. Die Lieferung hat ein Tag gedauert und es war gut verpackt. Ich bin definitiv sehr zufrieden das mein Drucker jetzt WLAN hat und für mich ist es eine klare Kaufoption!

If you don't mind the fact that this device is Chinese developed and manufactured and not audited for security (though the brand has been around quite a while), then this is a great and inexpensive way to extend your wi-fi or provide an inexpensive travel router, assuming you don't mind a cap of 300Mbps. I purchased this to use with an LG OLED C8, whose wi-fi chip has been rendered borderline useless by a recent firmware update. It's being used as a bridge to connect to my wi-fi and then pass that onto the TV through it's Ethernet port. After hours of using it with 4K content, it hasn't missed a beat and is doing a great job. The firmware is basic and full of bad English (not unusual), but it's functional and even if you're not technical, following the quick start guide should get you up and running. It also has a one-button firmware update function built-in, which is very handy. This is a device for specific purposes but it serves that purpose well and for a cheap price. If you're concerned about security though, you might want to make sure it only has a connection directly to your router and not the wider Internet directly.

It works exactly as promissed, But you have to be in the Wifi zone to install it correctle and make it working

Cumplió al cien con todas las características mencionadas en la publicacion