wisedry Silica Gel Beads Reusable - 2.2KG [5 LBS] Color Indicating Rechargeable Desiccant Bulk with 10pcs Organza Drawstring Bags

Does what it should, good quality and no problems so far. I'm happy with the purchase and would buy again.

I bought these to use inside my Bambu Labs AMS system in order to help dry out filaments when stored and in use. I have a humidity sensor that I have placed inside the AMS which is hooked up to a HA console so I can read the output. My measurements before adding this in was around 40% humidity. After printing containers and placing a fair amount of this inside, my measurements got as low as 18% after a couple of days.I've used a fair amount of this now and have had to "recharge" the desiccant a couple of times. First I will say that the desiccant does change colour and does reset back to it's original state when heated in the microwave. Not only does the colour change but you can see the moisture leaving through the amount of steam produced. Due to the amount of steam and how hot the desiccant does get during this period I did tend to ignore the instructions that say to leave it in the microwave for something like 8 minutes and instead do it in bursts of 1-2 minutes. I would also recommend using a glass dish or something that can withstand high temperatures as I did try using a plastic container on a small amount and the desiccant did end up melted into the container.Overall would definitely recommend and have even given some to a friend for the same purpose as I have used it and they have had similar results.

Wisedry reusable silica gel beads are perfect for keeping 3D printer filament dry. They come with small bags for easy storage and can be recharged for long-term use.Review:The Wisedry silica gel beads have been a fantastic solution for keeping my 3D printer filament dry. Moisture can easily ruin filament quality, but with these beads, I don’t have to worry about that.They come with small, convenient bags, making it easy to place them inside storage containers or filament boxes. Best of all, they’re reusable — just recharge them when they’re full of moisture, and they’re ready to go again.This product offers great value and peace of mind, ensuring my filament stays in perfect condition for smooth, reliable prints.

Works well and the container is sturdy and useful. Some of the beads are quite small.You can buy cheaper else where on Amazon that are bigger beads and come with several desiccant bags.

I purchased this rechargeable desiccant tub for £17, and it's been a fantastic addition to my Bambu Lab AMS setup. The ability to recharge makes it much more convenient and cost-effective than disposable options. I even printed custom cases for the silica, and one 2LBS tub is more than sufficient for all of them, with plenty to spare.Pros:✅ Rechargeable, eliminating the need for disposable desiccants✅ Easy to see when the silica needs drying out✅ Ample quantity; one tub covers multiple cases with extra left over✅ Perfect for use with Bambu Lab AMS✅ Arrived the next day with Prime deliveryCons:❌ None that I've encounteredConsidering that similar products can be priced higher, the £17 I paid seems reasonable for the quality and quantity provided. Overall, a solid investment for anyone looking to maintain optimal conditions for their 3D printing materials.

Amazing! Used it on the AMS of my 3d printer and had instant results. Highly suggested,

Fantastic for keeping my filament dry in my CFS units and helping to keep it dry in my storage bags. Really good stuff and good value for money. It can be recharged so don’t be fooled by a smaller tub of it it goes a very long way

This worked wonders for our 3D printer.The room humidity lies between 45_50 and this brings the printer inside to approx.10!!So great for your filament.We 3d printed the inserts for the printer and the beads where simple enough to transfer over. I will note that a funnel would have been nice to be Included so we didn't have to make our own!These beads are reusable and so gar we have not has to reheat them..May update this review once we have reset them if they do not work well after etc. But so far so good

Le perline essiccanti in gel di silice wisedry si sono rivelate un acquisto eccellente per mantenere l'umidità sotto controllo in vari ambienti.Le ho utilizzate all'interno dell'AMS della mia stampante Bambulab e posso confermare che fanno un lavoro eccellente: mantengono l'umidità costante al 10%, garantendo condizioni ottimali per la conservazione dei filamenti.La caratteristica più apprezzabile è la loro riutilizzabilità: una volta sature, è sufficiente rigenerarle nel microonde o nel forno seguendo le istruzioni fornite, rendendole pronte per un nuovo utilizzo. Inoltre, l'indicatore di umidità arancione è estremamente utile, poiché cambia colore quando le perline hanno raggiunto la loro capacità massima di assorbimento, segnalando chiaramente il momento della rigenerazione.La dimensione delle perline (2-4 mm) le rende perfette per adattarsi a diversi utilizzi, e la loro capacità di assorbire fino al 30% del proprio peso in umidità le rende davvero efficaci. Per chi, come me, ha bisogno di proteggere i filamenti della stampante 3D dall'umidità, questo prodotto è una scelta eccellente! Consigliatissimo!

Parfait, avec un beau rapport prix/kg. C'est également la première que je reçois un dessicant avec une note détaillée pour son recyclage.

Para quienes trabajan con impresoras 3D, la humedad es el enemigo número uno de los filamentos. Filamentos húmedos significan impresiones de mala calidad, atascos y mucha frustración. Por eso, cuando tuve la oportunidad de probar estas perlas de gel de sílice reutilizables Wisedry de 2,2 kg (aproximadamente 5 LBS) con indicador de color, las vi como una potencial salvación. ¡Y puedo decirles que son un verdadero "game changer" para cualquier entusiasta de la impresión 3D!Al abrir el paquete, la generosa cantidad de gel de sílice es lo que más impresiona. 2,2 kg es bastante, lo que me permitió utilizarlas para proteger varios rollos de filamento simultáneamente. Las perlas son de un tamaño uniforme y lo que más aprecio es el indicador de color. Inicialmente, son de un naranja vivo, indicando que están listas para absorber humedad. Esta funcionalidad es crucial para nosotros: cuando el color cambia a un verde oscuro, sabemos inmediatamente que han absorbido humedad y necesitan ser reactivadas. ¡No hay adivinanzas!El paquete trae 10 bolsas de organza con cordón, lo que es un excelente y muy práctico extra. Nos permite distribuir las perlas por varios recipientes herméticos donde guardamos los filamentos, o incluso dentro de las cajas donde vienen los rollos. Yo las uso directamente dentro de las bolsas Ziploc grandes donde guardo mis filamentos después de abiertos, y también en un contenedor más grande con varios rollos.La reutilización es el gran as de este producto. Cuando las perlas se ponen verdes, basta con extenderlas en una bandeja para hornear y colocarlas en el horno a baja temperatura (verifique las instrucciones para la temperatura exacta, pero típicamente rondan los 120°C) hasta que vuelvan a su color naranja original. Es un proceso simple y económico, que nos ahorra tener que comprar desecantes desechables continuamente y, lo más importante, estropear filamentos.La capacidad de absorción es notable. Noté una diferencia brutal en la calidad de mis impresiones desde que comencé a usar estas perlas. Se acabaron el "stringing" excesivo, la porosidad y esos crujidos irritantes que indican filamento húmedo. Mis impresiones son más limpias y consistentes.

Ürün İthalat Kapsamında değil

marche parfaitement et se reconditionne au micro ondes. Relancer le micro ondes jusqu'à ce que les petites perles soient à nouveau dorées et non vertes.