Question 1

Can this be used to replace a convertible top rear glass?

Accepted Answer

Looked at the ribbon and it do not appear to be what I needed. I used the material in the tube about 1 year ago to replace rear window in Miata. Still appears to be holding fine Application went well but took two people.One to hold glass, one to apply goop. Cautions - it is VERY sticky - wear rubber gloves. I was not too successful in smoothing it out after applying it. Use care and it will look ok. You may do some experimenting first and look at some you tube video. I used the recommended primer on the glass

Question 2

how can this be both round and 1/8 x 1/4"?

Accepted Answer

Difficult question to answer...I just looked at mine and it appears to be apprxly 1/4 inch "round" x 30 feet to start, but it is squished in many spots that appear to be apprxly 1/8 inch in depth and no longer "round"; it could be squished more or less depending on what you need.  Not sure this will help, but maybe!

Question 3

How thick is it? I need a 1/4 to 3/8 inch thick by at least 1/2 wide and at least 20 feet long.

Accepted Answer

1/4" round, it gets wider if you press it flat. It is clearly labeled 1/4" by 15 feet . . so NOT 20 feet long.

Question 4

Would this work on a 2007 Saturn Ion?

Accepted Answer

Thank you for your question.  We suggest using the same type of adhesive your vehicle manufacture uses to install a windshield or a suggested adhesive from the manufacture.  In this case, your vehicle should use a urethane adhesive such as 3M 08609 Window-Weld Super Fast Urethane Black Cartridge.  Feel free to contact us at 877-666-2277 option 2 if you have any questions.

https://www.amazon.com/3M-08609-Window-Weld-Urethane-Cartridge/dp/B000FW61EW/ref=sr_1_1?keywords=B000FW61EW&qid=1565357516&s=gateway&sr=8-1

ASIN	B000CQ4ANU
Best Sellers Rank	#26,689 in Automotive ( See Top 100 in Automotive ) #62 in Body Repair & Restoration Adhesives
Date First Available	November 23, 2005
Department	unisex-adult
Item Weight	8 ounces
Item model number	08610
Manufacturer	3M
National Stock Number	5330-01-304-5043, 6515-01-473-9378
Product Dimensions	10.86 x 10.83 x 1.06 inches

3M Windo-Weld Round Ribbon Sealer, 08610, 1/4 in x 15 ft Kit

Description

Specifications

Common Questions