Vibra-TITE 213 Red VC-3 Original Threadmate, 250ml Can

Had great luck with this stuff... it's just EXPENSIVE. But used it on a bunch of stuff and had no issues. Works as advertised!

Works great. Not a thread locker. Service removable.

Way better than blue loctite. Clean your fasteners before use. Apply to threads. Let cure for 30 minutes prior to installation. We use on all out club firearms and air guns, as well as archery equipment.

They used this were I used worked at the US Naval Ship Yard as an alternative to Loctite type products or Teflon Pipe Tape. I worked in he Diesel Shop and what had been happening is that when Pipe Tape was used on Screwed in Plugs on the Engines bits of the Pipe Tape sometimes would come off and end up some place in the Engine; in particular the Fuel System and cause grief. They started using this stuff to idiot proof the Job. Also Loctite type Products work but can sometimes be difficult to take apart. you spread it into the Threads and let it dry and it dries to a rubbery coating that seals and keeps stuff from coming loose. Once the Threads are coated you could put the un-used item on the shelf and come back years later and use it. Many Auto Part screwed in Plugs and Sensors come pre-coated with similar stuff. What ever you assemble with it will also dissemble easily later and the claim is you do not need to re-coat (you get a bout 3 uses without recoating). I have never tried that claim. But you can see the usefulness of that if you have a Mountain Bike or Skateboard that you need to take apart and re-assemble on the Road somewhere. The stuff is more expensive then Loctite type Products and not easy to find locally and then only at some exorbitant price. So that while it could entirely replace Loctite type Products I horde the tiny Bottle and use it only for special applications where Loctite is less likely to do a good job. This is a mundane example but I have an Electric Frying Pan that the Screws Vibrate that in use the handle Screws Vibrate out of. The Pan gets too hot for Loctite but the Vibri-tight works.

It works great. It's better than standard thread locker since the fastener remains adjustable and it can be removed and reused several times. But I think the price is absurd.

Awesome stuff. Always have this around when using a normal threadlocker isnt a option. Great for guns, RC cars, very small screws etc.. Not for high temp environments but good fod everything else. Been buying this fod years and will continue to do so.

This stuff works great for most thread-locker needs, but it's easy to ruin the bottle getting the cap stuck on. I've found a few wraps of teflon tape on the threads when you first get it solves this problem and saves a lot of headache later.

This is the best threadlock on the market . It remains pliable & can successfully be loosened & retightened several times before a need of reapplication .

Works really well. Locks the threads but still easy to remove.

It's good

Small quantities, only air in the tube

This product makes bolts & nuts secure from loosening against vibrations. It is easy to put appart and reuse not more than twice.

This was recommended to me for use on rifles where blue locktite just wasn't keeping screws from backing out. I tried it on a couple particularly troublesome pieces and it has so far held tight past the point where the blue would have failed.