Product description Attention: This machine needs to connect to a computer through its controller box with a parrallel cable (both included). It is not recommended to connect to a notebook through a parrallel port as the power saving features tend to interrupt the data flow. It is also not recommended to connect to a computers with 64 bit versions of Windows due to problems with the Parrallel port driver. These issues are detailed and fully explained on the Software website. Feature: 1. The NEW 1.5KW water-cooled VFD is available operating for long time,which can reinforced the processing abilty of the machine and can be used toprocess aluminum alloy and hard wood. 2. Water cooling spindle works more stable and durable. 3. High quality accurate ball Screws drive make the engrving more precision.Anti-blackflash,high precision,long life circle. 4. Software Compatability: Emc2/Type3/ArtCAMParameter. CNC Engraving Machine Parameters: X, Y, Z Working Area: 600(Y)*390（X）*120(Z)mm Outside dimension: 865*680*570mm（L*W*H） Table size: 770（Y）*490（X）mm Lathe structure: 6061/6063 Aluminium alloy Max. Feeding height: ≤100mm Drive unit: X axis---1605 Ball Screws Y axis---1605 Ball Screws Z axis---1204 Ball Screws Sliding unit: X axis---High intensity Chromeplate shaft Y axis---High intensity Chromeplate shaft Z axis---High intensity Chromeplate shaft Legal Disclaimer Stepping motor: 57 two-phase 3A 150N.cm Spindle motor: Tips: 1. The spindle motor must connect with the VFD. 2. It cannot directly connect with the supply voltage (AC220V). 3. Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor. Outside dimension: 80*188 mm Material: 304 stainless steel, Copper coil, Pressure cast aluminum pipe water jacket VOLTS, current, power: AC220v 50hz, 5A, 1.5KW VFD Spindle motor: 1.5 KW water cooled Spindle speed: 24000 rpm Max working frequency: 400Hz Principal axis collet:ER11collet, Standard configuration :6mm Nut Model: ER11-A Cooling: Water-cooling Speed mode: By adjusting the VFD output voltage and operating frequency from 0-24000RPM Lubrication way: Lubricated by high grease Repeat accuracy: 0.05mm Spindle precision: radial beat acuities 0.03mm Carving Instructions: G code / TAB files / nc file / NCC files Communication interface: through parallel connection with computer Software environment: Windows XP/win7, 32bits system Working Speed: 50-1500mm / min (different material with different speed settings) Maximum Idle speed: 0-1500mm/min Control box parameters: Operating Voltage: AC220V, 50hz Control unit: Toroidal transformer PWM power supply module TB6560stepping motor drive Computer connection: Parallel port Command code: G code Acceptable software: EMC2 Protection: Emergency stop button Friendly reminder: The engraver will come with software（Free Version If you followed the installation tips offered by us, it works like full version.） Installation tips: - The software perform better on the 32bites system computer. - Please close the firewall and antivirus software on the computer before DOWNLOADING AND installing the software.(This is very important) - Otherwise, the antivirus will regard the cnc software as virus and stop the installation. PS: Please don't update the software when installed, then it will not need the license Numbers.
Trustpilot
2 months ago
2 weeks ago
