Audio2000'S AST420Y Portable Flat Panel TV/Monitor Stand with Foldable Tripod Legs

Very nice tripod! Sturdy! Perfect for my Bose S1 Pro plus speakers.

The Audio2000 AST420Y small PA speaker stand is a great buy. It's built like a tank. I had considered another model by a better known company and saw it in person at a local store. It was lighter but felt cheap and a bit flimsy. This Audio2000 stand is super sturdy. It is a couple of pounds heavier than the other one but well worth it. I mount a Yamaha DBR10 PA speaker on it and it works great. I'm sure it would have no problem with much heavier speakers. I like that they used the side-tightened style of clamp for height adjustment rather than the type that pushes into the pole. Much more secure and doesn't mark the pole's finish. The knobs work great and the safety pin is a nice added feature.

I use this to hold a second 23" monitor next to my small notebook computer desk and I can position the screen perfectly. In addition, when I have to go to a different location to work this stand is compact and light enough to take along so I don't need to worry about what kind of desk or table I will find. The stand is very stable and easy to set up and take down. Some other reviews have mentioned problems with the way the monitor mounts to the stand. I found it a little confusing at first and if it isn't done correctly there is very little holding the monitor up (two thin bolts). The VESA mounting plate has a long hooking lip and the plate must be attached to the monitor so that the lip is on the top. That lip hooks over the rotating bracket that then attaches to the top of the stand. The two thin bolts screw into the bottom of the VESA plate, not supporting the weight of the monitor but just keeping the plate firmly hooked to the bracket. Attach it this way and there is no chance of the monitor falling off of the stand.

I'm very pleased with the build quality AST420Y. It is very strong and provides a stable mounting (no-tip-over), yet it is quite lightweight and folds into a small, portable footprint. I was looking for a stand to mount a QSC K8 not too high off the floor, and this stand fills the bill nicely. I'm sure it could handle a bigger speaker, like a K12 too. One thing: For the lowest possible noise, you may want to secure your speaker with a mounting bracket, like the On Stage EB9760 Exterior Speaker Mounting Bracket or the Odyssey LATSA1 Speaker Followspot Adaptor For Tripods . I don't think this issue is unique to the AST420Y. My speaker (the K8) comes with a 35mm mounting hole, but there is understandably a tiny amount of slack in the diameter - enough to allow poles from different vendors to insert, but also enough to allow some vibration. All things considered, I'm very pleased.

I use this stand as a home consumer because I wanted an economical way to mount my flat screen TV. I Wanted a stand that had great assembly quality and is very robust. Well all I can say is that this stand exceeded my expectations. It is constructed like a tank and is extremely durable, i.e. I will stop short of heavy duty quality. I use my own quick Vesa disconnect system for my Vizio 24" monitor so I can connect and remove my monitor with the push of a button and it works extremely well. It should be noted that this stand comes with a quick disconnect system for the monitor as well, which consist of removing two knurl knobs, but this system is not as quick as the one that I use. My quick disconnect is used in conjunction with this stands quick VESA disconnect with no needed modifications. As for the Mike Holders I did not need them as i'm not using the stand for Karaoke. These Mike mounts are mounted outboard of the horizontal plate show in the picture using two screws for each Mike mount. If you don't plan on using the Mike mounts just mount them inboard of the horizontal stand using the two screws. In mounting the unused mounts in this fashion you will retain all of the hardware pieces and the mounts will not stick out like to Monkey ears. As stated both mounts will be mounted inboard and pointing toward the VESA mount. I would recommend chasing the screw holes with the screws before trying to mount the Mike stands. The reason for this is that the whole unit is powdered coated and that includes the screw holes so the screws can be somewhat difficult to get started, especially if you are trying to get the screws started while also holding the Mike stands into position. The only things that I wish that this stand had is a horizontal table mounted somewhere between the Tri-legs and the VESA mount. There is more than enough room and the horizontal table can be a quick mount/unmounted system. This quick mount table can then be used for tabling AV equipment such as video player, Media streamer, etc. I also which that there was an optional quick connect plate for the VESA mount that could then be used as a table for a Video projector. Maybe these item exist or will exist at sometime via Audio2000's website or better yet right here on Amazon All-in-All these days i'm not impressed much by the quality of things being sold as a whole but I am pleasantly surprised by the quality of this stand. This item easily has my seal of approval

I needed something to put a karaoke monitor on out front of my DJ setup and on a whim went looking around for a VESA mount for a mic stand. Found one, but also found this, which is 10 times better! This stand is GREAT! It is heavier duty than my speaker stands and the legs when fully opened will stabilize the biggest monitor you reasonable would put on a VESA mount that size. The small 17" one I have on it solid. It is hard to tell in the photo but the mic holders do have a slot on the side so wired as well as wireless mikes can slip in, you'll want to use a round head Shure 58 or equivalent so it doesn't fall through. Like others have said the hardware is top notch, adjustments can be tightened down securely, and the monitor and its adapter can be taken off with just 2 thumb screws for transport. Great deal at the 70 price too!

I've used this a couple of time since I've purchased (about three weeks) it and it does the trick. I use it for karaoke with a 20" monitor. I've seen it bumped around a little bit and it's held up on its own, though it wouldn't take much to tip over if someone wanted to shove it intentionally. The build quality seems pretty decent, it feels solid and is heavier than it looks though I'm sure that helps keep it upright. If you're looking for a portable stand to mount a compatible monitor with, this will work great. I don't know how well the mic holders work because I didn't install them. I can't say how it will last with repeated use over time but I'm happy with it so far.

The price point was a bit on the high side.

Tan fuerte, sólido y estable como otros similares de precios mucho más altos. El tamaño lo hace muy portable. Yo lo uso con una bocina Yamaha DXR10 queda a una altura ideal para monitorear mi guitarra.

Very sturdy stand. Well constructed with quality materials. I was so pleased with it's durability I purchased a second one for my 27" monitor. I would definitely recommend this item.

Excellent produit