Mount-It! Heavy Duty Full Motion TV Wall Mount for 16’’, 18’’, 24’’ Wood Studs, Fits 32-65 Inches LCD LED Plasma Flat Screen Curved TVs up to 165 lbs

Bought for Vizio M 50 . ( TV approx 35 lbs). This is a pretty heavy duty mount. Well made and finished. Functions as designed. It is heavy so some might need help mounting on the wall. I was able to mount it by myself with no real issues. All the hardware needed to attach mount to wall and TV to mount are provided. They actually provide 4 different sizes (diameter) of machine screws for mounting TV to mount in 3 different lengths each.. Very thoughtful of them. The mount should fit most any TV with the main concern being weight. Is easily adaptable for whatever screw pattern/size required to attach mount to TV. It seems to handle my 50" Vizio with no strain what so ever. (35lbs) There are numerous bushings if needed for use between the TV and the mount. My Vizio did not require their use. I believe if you have one of the curved TV's you might need them. The hardware is of good quality and I see no reason for any issues to come up with the installation. I would recommend having your own level as others have mentioned. Good clear instructions were provided. Minimal tools used. Drill/driver w/large Phillips or appropriate socket and 3/16th drill bit for pilot holes for lag bolts. Must find center of studs. Personally I would NOT mount this only to drywall.. But that is entirely JMO. Once installed mount functions easily and is adjustable as designed. Holds position with no sagging. Mount is adjustable after basic installation to tweak level. There are allen head screws (allen wrench is provided) on TV mounting plate with bushings that you can loosen and make minor corrections to get the TV perfectly leveled. I would suggest simply lifting the TV off, make small leveling correction and hang TV again. Not really difficult. The one tip I would add is to pay attention to how you mount the mount arms to the back of the TV. I believe it is advantageous to attach the arms in a position so as to have a balance neutral situation.. What I mean is not attaching the TV to high up or too low on the mount to avoid having the weight of the TV cause unbalanced stress on the frame which could (imo) make the articulation of the TV a bit more difficult and possibly result in some sagging. (small point but I think some problems with sagging or TV not wanting to hold its tilt angle arise out of this factor) I think this is a very good mount and they provided more than the minimum hardware required to do the installation. Would not hesitate to buy this product again.

First things first. this thing is HEAVY DUTY. Not for a wimpy little tv. The mount weight about 27 lbs. Great stability, which is why you want a two arm stand, and not a single arm. Installation is easy, and the thing comes with a lot of extra screws, so you can mount it in different surfaces, and with three sizes for screws, each in two lengths for the back of the tv. Even spacers, in case the back of your tv is curved. Well made. There is only one complaint I have. I read it in another review here, so I was watching for it. Like the other reviewer said, the built in bubble level is WAY OFF. Not even close. Use your own level to level the frame that mounts to your wall. When mounted, level the front rail. The 4 bolts in front on mine were not tight, and it was not square to the back, so leveling the front, then tightening those 4 bolts is necessary. The knobs that control the tilt feature are hard to reach with big hands. It's a tight squeeze between the back of the tv, and the front rail. I was able to reach them, though. Not a big problem, because once you set that, you're not going to change it (at least not often). Movement is stiff, like is should be. You don't want it flopping around at the slightest touch. That too is adjustable, simply by backing off the self locking nuts at the pivot points. Make sure you mount to at least one stud. I hit one right in the middle, and put 4 drywall anchors on each side. You are going to love it.

I purchased this mount for a 65 inch curved Samsung 4k tv. I will say that the mount is very sturdy. It doesn't have any problem supporting my tv (62 lbs) and there is virtually no sagging when it is fully extended from the wall. As other reviewers have stated, it is very heavy. I was able to mount it with little issue, but I did work up a sweat. Keep in mind that it could be a challenge or require two people. The instructions that came with the mount were not in English, but the assembly itself is pretty straight forward. Lack of appropriately sized hardware (nuts and bolts) was the really frustrating thing for me. It seems like they just threw randomly sized bolts into the bag. Not all of the bolts came in even numbers, resulting in me having to search around the house to find the extras that I needed. It also only came with one of the large plastic 'wheels' that you use to adjust the bolts that control the up/down tilt. Fortunately for me, the one from my old mount worked. The main reason that I have given this 4 stars is the ability to push and pull from the wall. It takes quite a bit of effort to push the tv back towards the wall when the mount is extended. It is really awkward because you can't just push it back on one side and then walk to the other side and do the same. You have to apply even pressure to the middle plate to get it to go back against the wall correctly. WD-40 helped slightly, but I think the main difficulty is the result of the dual arm design. If you aren't regularly adjusting the position of your set, it's really a non-issue. All in all, this is a great mount, and I have total peace of mind that my tv is secure.

En definitiva, este es uno de los mejores soportes para pantallas mayores a 45 pulgadas en el mercado, hoy en día lo he comprado 4 veces para instalar todas las pantallas de mi hogar y ¿qué es lo que lo diferencia de los demás soportes? PROS: 1.- Incluye un cable HDMI 2.- A diferencia del 90% de los soportes del mercado este tiene 2 brazos que soportan la pantalla por lo que lo hace mas seguro y de fácil maniobra para acomodar tu pantalla al mejor ángulo cuantas veces lo necesites. 3.- Siempre el miedo cuando instalamos una pantalla es que sea 100% seguro y que la pantalla no se vaya a caer, a diferencia de los demás soportes este tiene 26 agujeros para el tornillo que va en la pared (sobre 4 – 8 que tienen los demás), los cuales puedes utilizar todos si no te sientes seguro únicamente con los 4 que usualmente se instalan en las esquinas para darle mayor soporte y seguridad. 4.- El nivel está adaptado integro en el soporte para que la pantalla quede derecha al momento de instalarla lo cual te evitas un gasto innecesario extra o de andar preguntando que si la pantalla se ve chueca o derecha para que casi siempre al final quede chueca. CONS: 1.- Es un producto que siempre tienes que comprar de importación porque nunca se encuentra disponible para compra nacional y una vez solamente tuve un problema que la caja llego abierta por lo que Amazon me notificó, me cancelo la compra y me hizo la devolución, pero ese mismo día volví a realizar a la compra y ya me llego correctamente. 2.- Al ser un producto de importación el precio tiende a variar por cuestiones del dólar y de que si es vendido por Amazon directamente o vendedores externos aun así vale la pena completamente yo he pagado en precio total con impuestos y envió alrededor de 1200 a 1400 en las 4 veces que lo he comprado. CONSEJO: Si quieres seguridad y firmeza extrema, puedes adicionalmente utilizar un producto que también esta de venta en Amazon o en cualquier ferretería de la marca Resistol que se llama Resistol no mas clavos que puedes aplicar al momento de hacer los hoyos con el taladro, aplicas un poco de producto, metes el taquete y ya después acomodas el soporte y metes los tornillos, yo en mi caso siempre he esperado 24 horas antes de montar la pantalla para que el producto haga su trabajo y pueda secar correctamente una vez hecho esto veras que nada ni nadie podrá mover ese soporte. Envío: Yo soy Amazon Prime y siempre me ha llegado en menos de una semana (7 días) por lo que desconozco los tiempos de envió sin ser prime.

Top quality for a very competitive price . Easy to install , the built-in level helps a lot during installation. Fits perfectly. Highly recommend this product and if I ever need one again I will not hesitate what to look for . Thanks

El soporte me parece muy bueno, es de un metal muy macizo, lo cual me da mucha confianza para colocar una pantalla en ella (yo tengo una de 55 pulgadas). Según las especificaciones, el soporte aguanta hasta 30 kilos, por lo que sin problemas podría soportar una pantalla de 70 o más pulgadas. Tiene integrado un nivel, pero realmente no es útil pues es el "panel frontal" está ligeramente inclinado con respecto al panel con el que se atornilla a la pared, por lo que deberán usar un nivel propio y ponerlo sobre el panel fronal al momento de instalar el soporte.

This is very heavy duty mount. TCL recommended a mount rated at 5x the weight of tv and this is closes I found. The built in level did not match my stand alone and seemed to be off! Im in an old building, but still. I recommend having a second level. The mechanism for pulling in/out is a little stiff and hard position without pushing pulling tv which is a big no no. If you plan to move tv in and out a lot this one isn’t the greatest. It works verywell for leaving it in fixed position once you found it.

Muy bien