WA310 4-Feet Microphone Adapter Cable, 4-Pin Mini Connector (TA4F) to XLR(F) Connector

Bought for BLX14. Works great.

Just what I needed. Worked perfectly. Need to buy another one soon for another transmitter that I have here.

SHURE makes great products and went with their cable. You may pay a little more but you get a lot more. I run Shure wireless systems and this is to an instrument, guitar, bass into the transmitter. Got 1 straight and 1 a right angle to accommodate the type of guitar or bass. Great product from a great manufacturer and it’s a win win in my book!

These work great with Line 6 G50 wireless transmitters, perfect length and no more straight jack at bass guitar body. They eventually fail(50 to 100+ shows) where the cable goes between guitar body and straploc pin.....so always have a spare. Receiver will show digital signal unstable if/when the "worn out" time comes.

I bought this cable for use with Shure BLX wireless bodypack transmitter and electric acoustic guitar, mainly because I was having too much trouble trying to make my own with a standard instrument cable ... too darn hard to properly solder the leads at the TA4F end. Another reason I wanted to make my own is that I wanted the cable to be a much shorter, custom length (a little more than a foot), so there's no excess cable hanging off my back when I'm moving around/playing. Another reason I wanted to make my own is that I prefer the Neutrik right-angle 1/4" plugs to the nickel/chrome jobs Shure uses with the WA302 (straight plug) and WA304 (right-angle plug).So, here's what I did. I bought the WA302 because it's a little cheaper than the WA304 (for no apparent reason other than straight plug vs. right angle plug). I cut the TA4F half of the cable to the exact length I wanted, and replaced the Shure 1/4" plug with my favorite, black Neutrik right-angle plug. Result: a perfect fit and look. Shure uses a smaller gauge, but nicely-shielded mic cable (copper-strand shielding, cotton insulation, red/black main leads) in order to make it a better fit for the TA4F connector. Problem is, the 1/4" plug they're using at the other end is designed for the typical, larger gauge instrument cable, and when the makers clamp this smaller-gauge cable in the plug housing, it leaves a pretty noticeable gap in the cable opening at the end of the plug. They've put a shrink-wrap tube on the cable for protection here, but I just thought this connection looked a little "bush-league" for a Shure product, and that's why I dinged the product one star. It *works* exactly as it's supposed to, but just doesn't look as "finished" as I think it should.The Neutrik plug that I replaced the Shure plug with uses a "clutch" type clamp to secure the cable in the center of the plug housing, not on one side of it. This three-prong clamp has little serrated edges that squeeze the cable as you screw the end cap into the plug to complete/seal the assembly. The end cap has a centered hole in it that stretches to fit the cable you're using. The Shure cable fit perfectly in the hole, creating a nice seal against dust and moisture intrusion at the entry point. As a matter of fact, it came out so nice that I'm buying another Neutrik plug so that I can use the remaining portion of the Shure cable to make myself an identical spare, with the smaller gauge Shure cable making it much easier to prep and solder the leads at the TA4F end ...All in all, even though I "hacked" this part to fit my particular needs, I'm still happy with the purchase. I'd just like to see Shure put a little more effort into the "cosmetics" of the connection at the 1/4" inch end of this thing.

Connects a keyboard to the wireless transmitter and works well.

These Shure units are built well and will last when taken care of. My original cable started fraying somewhat at the jack. I bought this as a preemptive strike before a failure. Much to my surprise there were TWO in the package. Not sure if that was a slip up on the suppliers part but now I shouldn't need to buy another for ages if ever. The right angle plug is an upgrade to the straight plug since all my guitars are les pauls and the right angle profile will be better a better aesthetic.

Let me preface my review with a bit of a background:I work as a sound guy (amongst other tech-related things) for my church's student ministry building. We own two identical LAcoustic systems (for middle school and high school) paired with M7CLs, your average collection of SM7s, 58s,Sennheiser 604s, etc..We also have 5 Shure ULX systems.Digging around in the tech booth, I found over 5 of the body pack transmitters paired with lavs (which we never use due to the acoustics of the room feeding back our with these mics, sadly). Since they had no use there, I researched what else we could do with them, and came across this adapter.This is a game changer for us. We currently own one, which our worship pastor uses with their Taylor Acoustic, along with their Shure Wireless in ear system. He is now cable free, and it has not changed a thing for him (other than its another thing for him to remember to turn off). Its as if he's still directly plugged in, there is NO LOSS in audio quality! I've been able to walk around the large room playing, and there is no dropouts.The cable itself is very strong, the connectors snap nicely in place and there's nothing loose about it.Bottom line, if you're a worship leader, guitarist, or bassist and have a free ULX system to use, get this cable! We plan ourselves to invest in a few more to get our whole band wireless. For $20, its a great wireless solution!

お好きなダイナミックマイクをマイク特性そのままに、写真のようにSHUREのボディパックにつなぎ、受信機をミキサーに、これだけでダイナミックボーカルマイクがワイヤレスマイクに変わります。驚いたのが、XLRケーブルで直にミキサーにつないだ時と、ゲイン、コンプ、パライコのポジションが実際使って同様で音変わりはありませんでした。動きが多く、マイクケーブルを上手く振れないボーカルにも最適です。ケーブル長が短いと言われていますが、私はボディパックを腰にセットで長すぎず短すぎず丁度良い長さです。SHURE以外の多彩なダイナミックマイクに対応出来るのが魅力ですね。SHUREの受信機とボディパックお持ちの方はこれ一本で、可能性が広がります。リーズナブルなのに使える、お勧めする逸品ですね。

Funciona perfecto con la petaca shure que tengo. Sin problemas de ruidos.

No issues. Seems good quality.

good tone perfect for shure glxd wireless sytem

Perfect