Permanent Valve

Worked perfectly to replace the broken valve on my temporary “donut” spare tire. Easy to install, very well made of brass. Tested over 3 days and it held 60 psi of pressure. May be slightly heavier than standard rubber valve so may affect balance but not a concern for my spare.

This is one of those off-road essentials that earns a permanent spot in your kit. If you’re 4wheeling, it’s the kind of product you don’t think about until you really need it—and then it becomes invaluable. It’s designed for fast, practical valve stem replacement in the field, which can save you from being stranded or forced into a tow after a damaged stem. The install process is straightforward compared to traditional tire shop repairs, and it’s built for real-world trail conditions. Durability feels solid, and it’s clearly made with off-road recovery scenarios in mind rather than everyday maintenance. Having a couple on hand adds a lot of peace of mind when you’re far from pavement. Overall, it’s a smart, reliable trail tool that serious off-roaders should not be without.

Perfect for me to replace a broken valve stem on my tractor, becausee these tires were filled with fluid and using these valves allowed me to make a quick repair with out losing the fluid or breaking down the tire off rims. Easy peasy!! I will carry one of these in my camper because I have a lot of stem problems with those stems due to the TPMS transmitters mounted on the valve stems. These stems feel very strong and can be mounted into the recessed stam holes in the alloy rims, all without dismounting the tire. These are wonderful and worth the price several times over. Did I say they are very high quality- they are.

They work as described, fast and easy with a perfect fit and seal. High quality materials that should withstand any future tractor operator error while clearing brush and pushing piles of tree debris. Not to mention that the stronger metal valve steam look pretty darn nice.

Time saver for sure! Works awesome easy to install. Functions as it should , put these I to an atv tire thay hasn't been made for 40 years! They're in a old chevron style soft sided tire with the 3 lug hub cast into the tire on a 50 y/o atc installed a year ago, been abused by every kid in the family since, doesnt leak, works as it should, awesome product, highly recommend, in fact I ordered more just to have them on hand

Worked great replacing a split valve stem on my truck. Jack the wheel up, let the air out, pull or push the old stem (doesn't matter if it falls inside). Installed the new stem, inflate and lower the jack. No tire removal needed!!!

These are awesome. Much stronger than regular valve stems and easy to install from the outside of rim. Maybe a little overpriced for what they are. I used these for my aluminum rv wheels to support the weight of tpms sensors on the ends. No issues after a few thousand miles with them.

As the title says, these things work. I had an old, crusty valve stem on a tubeless tired used motorcycle I purchased. After about a year, it suddenly developed a catastrophic leak through the cracks in the valve stem, leaving me stranded temporarily. I didn't feel like paying tons of money for a shop to remove the tire and replace the valve stem, and I didn't have the means to remove a tire at home easily, so I figured I would give these things a try after someone recommended them on stromtrooper.com. What do you know? They work great, and they're dead easy to install, even without removing the tire. I tried to remove the old valve stem as best I could with some needle nose pliers and a flathead screwdriver and managed to get most of it out from the outside of the rim. Some pieces did fall inside the tire, but I haven't noticed any negative effects from there being a few small pieces of rubber in the tire. I put this thing in the rim, tightened it down, and voila, solidly sealed tire. This nicely machined replacement valve should probably be the default valve as it works, is easy to install, and is made of metal, not rubber. I pumped the tire up and it has held the same psi for about a month now. Very satisfied. Also, made in the USA.

Used this to replace a split valve stem on my van. The valve was easy to install and seemed to be doing the job, but there turned out to be a leak from the valve core which was not tightened enough inside the valve stem. This was obviously a very easy fix but make sure to order a valve core tool with this kit to check the core is tight before using. Otherwise, this has been on my van for a few months now with no issues, would definitely recommend carrying these as a spare if going on long trips or travelling off road

Haben mir schon häufig auf Reisen geholfen. Handhabung super einfach und schnell. Halten tun sie auch! Um sie heil wieder aus der Felge zu bekommen muss der Reifen abmontiert werden. Wirklich ein super Produkt, was in meinem Offroader als Ersatzteil nicht mehr fehlen darf. 2 Ersatzgummis sind mit dabei.

great product for an emergency . remember you will also need an inflator and 1/2" socket and 3/8" ratchet or 1/2" wrench . you can get one on amazon : ) i had a leaking tire valve and thought ok now i am up sheitz creek. then i remembered buying these back in the fall . followed the easy instructions and was on and had my tire inflated in about 5 minutes. saved me a tow and the labour . oh and these are lifetime so no need to remove .

Very happy could not recommend more

CRIKEY, PERFECT.