Zulkit 5Pcs Project Boxes ABS Plastic Electrical Project Case Power Junction Box Black 2.76 x 1.65 x 0.71 inch (70x42x18 mm)

I had a little project in mind when I purchased these boxes and it worked out nicely. The boxes are solidly built but easily drilled for jacks, switches, wires or whatever you need. They are small (that's what I was going for), so you have to plan out your work to get everything fit as needed, but, they are easy to work with. The covers snap into place easily and fit snugly so they won't be falling off. Nice product at a good price.

Very nice ABS plastic project box and relatively inexpensive. The boxs I purchased were listed as 100x60x25mm. I have included a dimension drawing of one of the boxes that I recieved. There is a very slight difference in the dimensions from top to bottom. I measured the box at the top open edge. The sides taper in 0.25mm from top to bottom. The locations of the standoff holes was a challenge to determine and represent my "best guess". Keep in mind that I am old, senile and half blind :-)

Boxes were as advertised. They are snap-secured, no features for screwing the lid down. There are some bosses inside that look like they might be used to support a PCB. The lid side is textured and the bottom side is smooth, so you'll want to orient your project such that the lid side is the viewable side.

small PCB 555 timer and 5-9 volt regulator projects. Covers fit tight, easy to modify and they're not brittle. I needed the smallest box for the smaller solder breadboard but tall enough to fit a 1000 uF electrolytic cap. I did have to use a dremel to grind down the PCB on the L & R sides about 3mm so it would fit and it did. I planned ckt layouts to not use the pads on those sides.Good quality & I'd definitely buy these again.

I'm not using this in an outdoor area so I cannot really discuss waterproofing - however using it to build a Pixel tester - it was the perfect box(s). S because I drilled the 1st two wrong but since I got more than 1 in the order 3 times was a charm and I gave two to a friend. Very happy with the purchase.

No dislikes. I needed to make a 1/4" headset jack output in front of my DGX digital piano, and it worked out perfectly.

Better than I thought in every initial concern. These are certainly not water resistant, but that's not what I was looking for. Great for small arduinos and other little timer boards like this one:https://www.amazon.com/gp/product/B07BT32T1M/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

work good for small projects

Ok for the price, but the plastic is more brittle than other brands. The tabs that hold the cover on almost always break off - never had this problem with other boxes of similar size. I'll be purchasing from another vendor when I need more.

When you need a quick project box and don’t want the hassle of 3D printing one, these are great. They are easy to work with, drill through easily for mounting a connector, and they’re really cheap. Recommend!

First off-two people say that the boxes snap together. They do go together but screws come with them. anyway, I love them. I want to buy more now to make certain that I get the same type even though I don't need to at this time.

Excellent little project boxes. Nice solid quality at a good price. I only needed one of the 5 so having 4 as a back up was a bonus.

Montage electronique