Specifications: The plunger diameter: 22mm Flow rate: 14L/min-22L/min Working pressure: 2.0Mpa-3.5Mpa Speed: 800rpm-1200rpm Power: 1.5KW-2KW(5.0HP-6.5HP) Packing size: 33.5X28X32cm Weight: 7.6 kg. TH-26 type three cylinder plunger strip pump includes: 1* Inlet pipe 1* Return pipe 1* Water absorption net 1* Pulley 1* Accessory kit 1* Manual Lubrication of the pump: 1. The sprayer should be replaced with oil for the first 10 hours and 50 hours of use, and should be replaced every 70 hours thereafter. 2. Unscrew the oyster sauce and remove the oil. 3. After the oyster sauce is locked, open the filler cap and inject the No. 30 to No. 40 cleaner. 4. The oil level should be kept at two-thirds of the oil mirror. 5. The butter cup is often topped with butter. The butter cup should be turned 2 to 3 times for every 2 hours of use. Troubleshooting: a. Unable to supply water and pressure instability. 1. Check if the absorbent plastic tube is leaking or blocked. 2. Open the water outlet switch to remove excess air. 3. Remove the inlet and drain chambers and check for obstructions or damage to the valves. b. Insufficient pressure. 1. Check if the pressure is adjusted properly. 2. Check if the belt is too loose. 3 Check the spray tube and the street for leaks or damage. c. Cylinder oil 1. Remove the anti-cover tightening adjustment ring. 2. If it is still invalid, replace the V-type in the cylinder.
Trustpilot
2 months ago
1 week ago
