AcuRiteIris 06003 PRO+ Upgrade for 5-in-1 Weather Sensor - 06003M

Works great, no trouble hookinh it onto our acurite weather station which had broken wind cups.

If you have an older Acurite Iris weather station, this is a really good upgrade. Our older model was still working, but it was making noise, and was significantly sun-damaged -- not a surprise at all, it's been out in the high UV desert sun for years. The new part was very easy to install. I'd suggest that the instructions remind you to change the unit batteries while you've got it down, and are taking it apart. I wish I had.

I have had the AcuRite weather station since 2013. It has weathered two hurricanes and has worked well for many years. However, the wind speed meter (anemometer) was showing its age. I contemplated replacing the entire unit until I discovered that I could replace just the anemometer sensor. This replacement part includes both the wind cups as well as a solar panel that powers a small internal fan. I believe the small internal fan contributes to the ambient temperature accuracy. After receiving the part, I followed the directions, and the replacement was fairly quick. I am hopeful that I can get another 11 years of use out of the unit. If not, I will certainly replace it with another AcuRite.

Replaced an identical unit that had one of the anemometer cups knocked off by hail. Subsequently the outside temp module began recording the temp as - 49. I could have replaced the temp module but what else would have failed. The original unit is 2+ years old. New unit took a long time to resync with base unit. Took 4 + hours to resync. Working well now. Outside temp is 98 now. Word to wise. The base display has a battery backup capability and probably needs to have batteries in it in case power does go out. Two days after my unit acquired the outside unit I had a total power loss. First one in over a year. My base display unit lost all its data and I had to reset all the settings. Probably wouldn't have occurred if I had batteries in backup slots. All things considered I think it is a good value for the money.. Read other comments that said the price of $86 was too much (thru Amazon), but compared to the alternatives which cost a lot more this unit is worth the price I paid.

My station has been humming along outside in total sunlight for about 3-1/2 years. I took it off the post, removed four screws and opened it up. It had a heavy cake of dirt and grime going on but remarkably no spiders or wasps. I cleaned it up then removed four screws for the top module. The new one fit perfectly and I got it all put back together in minutes. I have wondered how long the spindle or bearings in the anemometer would last so this solved that worry. The temperature readings used to run a little hotter than our TV weather reports, but now they are just slightly cooler than the TV which is what it should be. We are out in the country a little bit, away from big buildings and concrete. If you aren't particularly handy at taking things apart don't worry. As long as you can use a Phillips screwdriver you'll be fine. I've got hand tremors from a spinal injury but I had no problem. One of the screws has to go into a hole that's deep down inside. I worried about that but they cleverly designed the product so that the opening looks like a funnel. The screw can't go the wrong place or get lost. I highly recommend this upgrade for your station.

WORKED

Good buy

Works great