CME 11 pc Adjustable Hand Reamer Set, 15/32" to 1-1/2" Reamer Sizes

They work good, nice and sharp, I use them to ream king pin bushings.

These are run-of-the-mill cheap Chinese adjustable reamers. The fit and finish is fairly rough, but they do what they say they'll do and will probably perform well at least as long as they stay Sharp.

When I opened the box, all of the reamers were out of place and on one end of the box. Each reamer was in a thin plastic sleeve (bag). There was no foam or any other softeners in the box to keep the reamers from banging together. Consequently, there are dings, chips and blunt edges on many of the blades. The blades were not deburred after sharpening so the undamaged ones are in need of deburring and cleaning. The storage case is very shoddily made and barely keeps the reamers in place and the blades from contacting each other when moving it. One of the reamers doesn't have the size range stamped on it like the rest do. Something is only a good deal if it's actually worth having and able to be used. With the damaged items in this set, I couldn't even do a decent reaming job on soft material like brass or aluminum. Made in India not China, or so it says.

They arrived as expected and they worked well for my purpose of reaming out some brass bushings. If the metal was much harder or i had to use them a lot i question how well they will hold up.. a bit flimsy feeling. But for the price they worked well for me.

Was a bit skeptical at first but I used them today on my lathe for reaming a shaft for press fitting a bearing . They work perfectly . Becarefil with your micrometer they are sharp and could scratch the measuring surface. I will be using them a lot.

They worked perfectly on cast iron part of antique John Deere tractor

The rings for positioning or holding the blades are too soft. There was indentations in the rings as shipped, don't know if too much force was used in the factory, but this makes it harder to adjust the diameter when rotating the rings, they catch on the blades. The wooden case bottom cracked open in a corner. Also found as in other reviews, there is a taper along the length of the blades, and not just at the starting end. I was making a 22 mm hole, that needed to be 2 inches deep, the tapering of the blades made it harder to keep the reamer perpendicular, when finishing the hole. I ended up with a sloppy fit. I don't get this when using a standard hand reamer on other items.

Very glad I purchased these. Used a number of times to size a hole to exact dimension. Good quality and the case is perfect.

yes a set of hand reamers, that's ware it stops. not in a wooden box as per advert, and not to the same quality as per advert. and I have to pay to return them.