(All Vehicles Blue High Intensity Grade Reflective Copyrighted Safety Rim Tapes (Must Select Your Rim Size), 17" (Rim Size for Most SportsBikes)

Love these. They look amazing on the bike and actually do what they’re supposed to do. The reflection at night is super bright, which adds a nice layer of visibility without looking tacky during the day. I ended up having extra and used it on other parts of the bike, and it all blends in really well. The quality surprised me too. The adhesive is solid. It’s already held up through sun and rain with no peeling or lifting. Definitely worth it if you want something that looks good and adds safety at the same time.

These reflective tape strips look amazing on my blue Ninja 650! They are bright, and reflect nicely whenever light hits them. The best part is I thought these would only look good at night. Boy was I wrong! The blue strips complement my bike greatly and actually give my boring black rims some color even in daylight. They are easy to install and just look fantastic. What's cool is they also include four 1 inch wide circle stickers and four star shaped stickers you can stick on your bike or helmet. A couple of things I discovered when putting these on: -Make sure your rims are clean before installing. I used aluminum rim cleaner and a damp paper towel to remove all the dirt/brake dust from my rims and then wiped clean with a dry rag. -Be patient! These are easy to install given that there is no disassembly required of your bike, but it does take some time getting used to because you have to carefully align the curved tape strips with your rim in order to make it form a perfect circle. Once you have one edge aligned simply run your finger along the tape and it should conform to the rim curvature as long as your aren't pulling tight on the strip. -Once you start to run into the frame bars, simply pop your bike into Neutral and roll forward to expose the other half of your rim before you start the next piece of tape. -Do not overlap the strips more than 1/4 inch around your rim as explained in the directions. When done carefully you should have 1 to 2 strips remaining which you can stick somewhere else on your bike or your helmet for additional protection. -When looking up close if it looks like you haven't made a PERFECT circle, don't panic. I thought this at first but then stood back and you can't even tell once your eyes are more than two feet away. Once you look at it standing up they look to form around the rim quite nicely. Just try to line up the edges of the tape as best as possible and you should be fine. -My installation time was around 45 minutes to an hour but that's including cleaning all four sides of my rims. Like I said this is a fantastic product that looks amazing and super easy to install. Not to mention $40 dollars is a small price to pay when it comes to saving your life. These will definitely help other drivers see you at night without having to install an expensive light kit. I would definitely buy more if my bike had more wheels. Thank you customTAYLOR33! Photos coming soon :)

Highly Recommend – Excellent Quality and Support! I’m very impressed with the detail and high resolution of this rim tape! The vibrant blue really pops and adds a stylish touch to my 2025 Yamaha XMAX 300. More importantly, I purchased it to improve visibility at night, and it absolutely delivers — I feel much more confident and safer on the road. Installation was straightforward. The tape is super sticky and adheres well — just be sure to clean your wheels thoroughly with rubbing alcohol beforehand (an inexpensive but essential step). Take your time with the application and you’ll be thrilled with the result. I also had a question about overlaying the tape and called the number on the included business card. I got a quick, clear answer — great customer service! This is a top-quality product backed by excellent support. Highly recommended!

Relatively easy to install. Looks great, reflects very well. My only “gripe” is that they aren’t very easy to peel off from the sheet they come on and there is ONE spare. The paper backing got stuck on one of the strips making it useless. It would be nice to have more than one spare, but beggars can’t be choosers.

Absolutely phenomenal product. I thought that the stock images had to have been doctored to make the rims look so bright but they weren't. There is no need whatsoever to doctor the images, the tape really is that bright! Now that is of course in a camera flash which is ridiculously bright, but even on the road any extra brightness is good brightness right? Application was easy. I cleaned my rims well will some run of the mill wheel cleaner coating them once to let it soak in then wiping them down with cloth three times making sure that I wasn't getting any black residue anymore on each new cloth. Instructions say it is fine to overlap a quarter inch but I didn't do that and the tape turned out great. If I was a couple millimeters off I noticed I could press hard and repeatedly rub in the direction needed and the gap would either close up all the way or get much closer. Close enough that when I am on the road it won't be visible anyway. The instructions also say that they only include at most 1 extra strip, but for each one of my rims I had to cut about 2.5 inches off the last strip to make it fit and I still have two full strips left. I bought the pack for 17" wheels and that is what I have on my bike so I am not sure why I have so much extra. Photos attached are before installation and after installation. This is in a parking garage with average lighting. All in all, I think this product looks awesome in daytime and even better at night time!

Great addition to my bike very easy to install had a couple not stick to well but there were enough for all my rims even with the 2 i had to replace very visible at night and day of you want to add some character to bike and be more visible then look no further

Bright, awesome, easy to apply and durable. I have always loved and trusted this brand, I have the silver white ones for my other car and they have been going strong for almost 3 years. These blue ones have so far based me through hand washes and automated car washes, freeways(60mph-80mph) and puddles. This brand is in my opinion is by far the best and brightest. I have used the Mohawk reflectors on my construction hard hat. And even though 115°F+ they have help up and not fallen off. Props to this brand. 10/10

Not legal for use in California unless you put yellow on the front tire(s) and red on the rear tire(s). The blue i ordered (and all other colors) are in no way legal for use in California ------------------------------------------------------------------------------------------------------------------------------- VEHICLE CODE - VEH DIVISION 12. EQUIPMENT OF VEHICLES [24000 - 28160] ( Division 12 enacted by Stats. 1959, Ch. 3. ) CHAPTER 2. Lighting Equipment [24250 - 26106] ( Chapter 2 enacted by Stats. 1959, Ch. 3. ) ARTICLE 15. Light Restrictions and Mounting [25950 - 25952] ( Article 15 enacted by Stats. 1959, Ch. 3. ) 25950. This section applies to the color of lamps and to any reflector exhibiting or reflecting perceptible light of 0.05 candela or more per foot-candle of incident illumination. Unless provided otherwise, the color of lamps and reflectors upon a vehicle shall be as follows: (a) The emitted light from all lamps and the reflected light from all reflectors, visible from in front of a vehicle, shall be white or yellow, except as follows: (1) Rear side marker lamps required by Section 25100 may show red to the front. (2) The color of foglamps described in Section 24403 may be in the color spectrum from white to yellow. (3) An illuminating device, as permitted under Section 24255, shall emit radiation predominantly in the infrared region of the electromagnetic spectrum. Any incidental visible light projecting to the front of the vehicle shall be predominantly yellow to white. Any incidental visible light projecting to the rear of the vehicle shall be predominantly red. Any incidental visible light from an illuminating device, as permitted under Section 24255, shall not resemble any other required or permitted lighting device or official traffic control device. (b) The emitted light from all lamps and the reflected light from all reflectors, visible from the rear of a vehicle, shall be red except as follows: (1) Stoplamps on vehicles manufactured before January 1, 1979, may show yellow to the rear. (2) Turn signal lamps may show yellow to the rear. (3) Front side marker lamps required by Section 25100 may show yellow to the rear. (4) Backup lamps shall show white to the rear. (5) The rearward facing portion of a front-mounted double-faced turn signal lamp may show amber to the rear while the headlamps or parking lamps are lighted, if the intensity of the light emitted is not greater than the parking lamps and the turn signal function is not impaired. (6) A reflector meeting the requirements of, and installed in accordance with, Section 24611 shall be red or white, or both. (c) All lamps and reflectors visible from the front, sides, or rear of a vehicle, except headlamps, may have any unlighted color, provided the emitted light from all lamps or reflected light from all reflectors complies with the required color. Except for backup lamps, the entire effective projected luminous area of lamps visible from the rear or mounted on the sides near the rear of a vehicle shall be covered by an inner lens of the required color when the unlighted color differs from the required emitted light color. Taillamps, stoplamps, and turn signal lamps that are visible to the rear may be white when unlighted on vehicles manufactured before January 1, 1974.

Good but it didn’t fit on my tires all sides only two side

très bien

Super reflective and easy to apply. They look good on the bike and make it safer. They give you extra reflective strips incase you dont have enough which is nice.

This is the second set I have brought to fit my second bike, my first set I fitted to a 2019 Ninja 1000. These strips are a subtle add on to the bikes, (this set I fitted to a ZX6R 2006 UK model) but when a camera flash or vehicle headlights hit them they really pop. There is enough strips in the package to cover both wheels (on both sides) with 2 strips left over for any gaps you have (had a small gap as I overlapped too much on one section). Installation is easy if you have a paddock stand, but make sure you clean the rims with an alcohol solution before you install them for better adhesion. WIthout a paddock stand it more of a pain but not impossible with a little patience. Yes, they are steep in price for what they do but just save up for a set and you won't be disappointed. Any bikes I have in the future I will be installing a set.

Exactly what I expected great product