Nuk3y Door Saver 2 II Hinge Pin Stop Fits All 3"" to 4-1/2"" Residential Hinges (Satin Nickel)

These work great. I don't know what's up with some of bad reviews. I think people don't know how to install anything. Simple to adjust and install. Little expensive. But clean simple solution

These work great, easy install with lots of adjustability. Only need a flathead screwdriver to get it installed, and you’ll never even know they’re there!

Works as expected and was easy to install. There is a noticeable rattle as the pin is thinner than the original causing it to not fit snuggly.

As a homeowner who takes security seriously, I recently purchased the Nuk3y Door Saver 2 II Hinge Pin Stop in the Satin Nickel finish. With its promise to fit all 3" to 4-1/2" residential hinges, I was eager to secure my doors and provide an extra layer of protection for my family. However, after using this product extensively, I regretfully award it a measly 1 out of 5 stars. First and foremost, the installation process was a major letdown. The package came with vague instructions that lacked crucial details. As a result, I found myself struggling to properly position and secure the hinge pin stop. The lack of clear guidance made the process frustrating and time-consuming. If the manufacturer had provided clearer instructions or even an installation video, it would have been immensely helpful. Moreover, the quality of the Nuk3y Door Saver 2 II left much to be desired. The Satin Nickel finish, which initially seemed elegant, started to chip and peel off after only a few weeks of use. This not only compromised the overall appearance of my door but also raised concerns about the product's durability. I expected better craftsmanship, especially considering the price I paid for it. Unfortunately, the functionality of the hinge pin stop was equally disappointing. While it claimed to fit all 3" to 4-1/2" residential hinges, it failed to do so effectively. The stop would often slip out of place, rendering it useless. Even when I managed to position it correctly, it didn't securely hold the door in place. On numerous occasions, a gentle push was all it took for the door to break free from the hinge pin stop's grip. This compromised the entire purpose of the product and left me questioning its effectiveness. In terms of security, the Nuk3y Door Saver 2 II fell short of expectations. I had hoped it would provide an additional layer of protection against forced entry. However, it proved to be an ineffective deterrent. I could easily see how someone with ill intentions could overcome the hinge pin stop without much effort. Its lack of reliability and durability made me doubt its ability to withstand any significant force. Furthermore, the customer support from Nuk3y was extremely disappointing. After experiencing multiple issues with the product, I reached out to their support team for assistance. However, their response was slow and unhelpful. It took several attempts to even get a response, and when I finally did, it was a generic and uninformative reply. The lack of proactive customer service and unwillingness to address my concerns left a sour taste in my mouth. In conclusion, the Nuk3y Door Saver 2 II Hinge Pin Stop in Satin Nickel was a disappointing purchase. The vague installation instructions, poor quality and finish, ineffective functionality, and lackluster customer support contributed to my dissatisfaction with this product. It failed to live up to its promises and did not provide the security and peace of mind I was seeking. I cannot recommend the Nuk3y Door Saver 2 II and strongly advise potential buyers to explore alternative options for securing their doors.

I just installed this onto a door that my son had ripped a hole into with the standard "Pin-type door stop." He ruined the door with one and snapped a second -- and I had 2 installed BECAUSE of how he does things. This was a 2-minute install and a 5-minute adjustment. It literally uses the plates of the door hinge to act as the door stop, turning the plates into de-facto leaf springs as it gets to the stop point. The only thing I would suggest is to double- and triple-check the swing allowance. Doing a few test runs to make sure that it works properly is a GREAT idea!

It’s a neat design, very sleek, and sturdy/solid metal. There’s one major flaw though. It could could be fixed easily by the manufacturer but would probably be too expensive to retool First, installation is simple *if* you have a door opening the sane way as in the instructions. However, if you have a door that opens in, with the jam on the left side, you have to install it upside-down. This is easy once you realize it, but the instructions don’t mention this, so it took a few minutes to figure that out. Maybe it’s intuitive to others More important, I was replacing a stopper thar had caused damage to the trim. It dug a notch into it and as a result, stopped functioning. Unfortunately, I have the same issue with this device, though to a lesser degree. If the manufacturer had added some sort of rubber coating or maybe a small metal plate (or something more clever than I can think if) this could be completely remediated I like the product so I’m going to look into possible workarounds Conclusion: If you have trim made of soft wood or wood-like material (MDF) I wouldn’t recommend this unless you’re ok with there being some damage to the trim over time. Otherwise, it’s a cool little product. The design and quality is otherwise flawless

This door stopper works great! I like that it is barely noticeable on our doors. I used one on each of our French doors.

I built a custom record cabinet for our vinyl collection. I also have two young kids who tend to fling doors open forcefully. I got this Hinge Pin to set where the door will stop so that it keeps my custom furniture safe. It was very easy to install. I used a small/narrow screwdriver and hammer to remove the previous hinge pin and then hammered this into place and then adjusted the stopper while testing the door. Installing the hinge pin scraped a little of the white paint off the door trim, which I'll retouch soon. Very happy with this solution as it's virtually hidden / not noticeable by guests and very sleek/not bulky. It does have a slight creak to it as the hinge stopper pushes against the wood frame. I normally use vaseline to fix squeaky hinges, but I don't think it's the solution here. I'll play around with it later if it bothers me overtime.

This does not fit any hinge in my house, nor can i source a hinge with a 1/4" diameter pin. Shame because it would have been a good solution.

Funciona perfectamente

Our front door kept banging into the closet doors even with the small, adjustable stoppers that fit on the hinge pin. The hinge pin would rise so that the stopper was floppy and didn't work. I installed one of these units and no more banging into the closet doors. I recommend it!!

this hinge works like a dream. Love how low profile it is. Would buy again.

Sadly, though my hinges are 3", the pin is too wide to be used in the hinges.