AUTOUTLET 2Pcs P6100 100MHz Universal Oscilloscope Probe,10:1 and 1:1 Switchable Oscilloscope Clip Probes with BNC to Minigrabber Test Lead Kit

These are of decent quality and are exactly what I was looking for. I needed a inexpensive pair of these for work. I didn't want to spend a lot of money but wanted something of fair quality. So far these have been more than adequate and didn't break the bank.

Good quality. Worked as it should.

I have an older Tektronix oscilloscope which needed new probes as the older ones were creating noise and I did not want to spend over a $100 bucks for a new Tektronics set so I deceded on this set. I have not had these probes very long but so far I am pleased with this set, as it turned out it is a great bargin at this price and it is a 1X/10X probe. Great flexibilty, strong clips for grabing the componet leads firmly and strong bond between the connectors and wire.

I'm kinda torn on this review. On one hand they are very questionable quality. On the other hand they were 15 bucks. On quality alone they are 3 stars. If you've used any kind of OEM probes, you'll know instantly these are cheap knockoffs. If you grade them on bang for the buck, it's clearly 5 stars. So I'll give them 4 stars despite the quality. I picked these because I had a function generator with no wiring either so I solved that problem for the same money and these arrived on time and the others I looked at wouldn't have. They did get me thru my time crunch but I'll be buying better and using these as backups. I hoped for better quality but for the price I can't complain. To my way of thinking, if you've invested any sort of money is a scope, spending 10-15 more bucks to get better quality seems reasonable. But if money is tight tight these do work. Just be careful with them.

I used these to replace my 40-year-old Tektronix probes. They look and operate very similarly. See the attached picture for comparison. The tips work well, grab and make good contact. There is an x1 and x10 switch to attenuate the signal. They are solid and rugged enough to get a lot of use from them.

I must admit, I wasn't expecting a lot, given the low cost, but I stand corrected. The probes came with the expected accessories, and trimming them to achieve children square wave reproduction was smooth, without glitching.

Easy to use. Plenty accurate enough for auto diagnostics. Full featured. With4 channels and the built in signal generatorLike the HDMI output so I can use any large monitor easily for very small graduations. I don’t like the way it’s been taking over half a year for a fix on their update. Don’t update this unit until the producer comes up with a fix! Plenty of YouTube vids if ya need help! Works great for me right out of the box, without an update. Let sleeping dogs lye.

The price is great and the probes arrived quickly. However, for my application, the probes did not have the bandwidth to provide a clean signal, when compared to the original Keysight (Agilent) high impedance probes (for course, these are 100X more expensive!). The biggest problem is that one of the three probes broke (electrically, not mechanically) only the second time I used it. They are too inexpensive to return and I think they are a good value for the money. But, if your application requires high signal fidelity, you are better off seeking a higher quality (and higher cost) probe from the beginning. I have ordered such a probe and am interested to see if its signal fidelity is sufficient to my task. The new probe is 1/10th the cost of the Agilent probes, not 1/100th like these.

After no tracking information, this item appeared out of thin air! After inspecting it, it appears to be a quality item of good value for the asking price. Nice job, looking fwd to a long use. Impressed with packaging also, Good Job Hancock !

プローブの周波数補正用トリマーが収められている部分がシールドされていないので、この部分はノイズを受けやすい。ただし、よほど環境が悪くなければ問題なく使えます。 他社製の物ではプローブ先端の手に持つところあたりがノイズに弱かったので、安価なプローブは特性を理解して使えばよいと思います。

Great for general purpose oscilloscopes.

Wasn't expecting much at this price point, but was better than expected. Could only adjust compensation on one probe to the correct setting. The second one I could only get about 97% compensation.

Wanted new probes for my overhauled Tek. Happy with them. Compensation works fine but dont forget to check the range for your scope. Cheap enough to carry a spare if they break. It seems all these Chinese probes are actually all made by the same factory - just the branding changes.