Hornit CLUG Bike Rack Wall Mounted | 5 Sizes | Easy To Install | MTB XL, White/Black

This is a great product, without doubt. My only criticism is the tyre size range recommendation.We have tyres that are 2.35" so i bought the MTB XL as they start from 2.3", however, this doesn't sit snug and hold the bike wheel vertically. You can balance it precariously but the slightest nudge will knock the bike out resulting in a loud crash! (first hand experience). That said, if you put teh bike up and then angle the front wheel to one side it holds it better.We also bought some mtb size ones and the 2.362 fits really snug and secure so I would recommend going for a smaller size if you are right at the low end of the size range.We also have two bikes with 1.95" wheels which is at the low end of the mtb size range (starting at 1.75"), and these again need to be angled to feel secured. If I hadn't already fitted them all, I might try to exchange them for the hybrid size, but I figure we'll get bikes with bigger tyres in the future so going to make do.Just wanted to share my size findings in case they help anyone. All said and done, they are REALLY easy to fit and do a great job of holding the bikes. Especially mine which fits perfectly! ;o)

I saw these on youtube and thought they where ingenious... to be fair I still think that but I did know to be carful to check the size as there are ones for different tyres. This one is for upto 2.6 I believe and my tyres are 29 x 2.1. They barley fit. I mean a massive effort to click it in. Please don’t be put off by this as this is still a really cool good quility product but just be warned if you own a mtb or have a larger thick wheel you will struggle.

I was pleasantly surprised how well this worked - I guess your experience may vary depending on what type of wall you have and the fixings you use, but in my case it holds the bike securely in place, and fixes securely to the wall with two rawlplugs and screws (which is necessary as when you remove the bike, there is obviously some direct horizontal load as the clip resists the pull - if it was a plasterboard wall, I could see it pulling out of the wall unless I used an anchored fixing).It is also incredibly neat, tidy and unobtrusive - much better than big hooks, and when the bike's in place, you can hardly see them. Personally I love the orange ones, but black or white would look just as good.However, in my case, the back wheel was resting against the wall, and therefore left a tyre mark... easily fixed by getting a second one of these little things, so both front and back tyres are clipped in and not touching the wall...

I’ve only given it 3 stars as I ride 2.85 tyres but in my opinion the appropriate sized clug is a tad to big. I therefore used an old ratchet strap around the whole thing just for extra security. My tire is properly inflated so it’s not because I’m riding low pressures either. Packaging is great, comes with all the necessary bits and the cardboard box with the drill points is a neat touch. I like it but in hindsight the size down would probably have been the better option. At £17 though it’s not something I’d buy another to replace it with. My tyre size was only just in to the largest size but it clearly was hence my purchase. The strap, although not as aesthetically pleasing, does the job so if you found yourself in the same sort of situation it’s not useless. It’s not until it’s on the wall either that you can see how the bike ‘pulls’ on the clug. By the time you’ve installed you’ve used the screws and plugs so sending back wouldn’t probably be an option.

Got this a week or so ago. Easy to put up.I took note of a few of rhe comments that if the tyre deflates if tou don't use your bike for a while, so when I attached it to the wall I put a velcro strip behind it and made sure the screws went through that as well.I tested it by letting the tyre down whilst attached to the clug and it stayed firmly in place.I like the minimalist look of the clug on the wall as it is in my conservatory, which occasionally gets used when friends come round & if needed the bike can be relegated elsewhere for a while.Would buy again.

Bought XL for my MTB with 2.4" tyres. There is nothing positive I can say about it.1. Too small clamp jaw opening. 2.4" tyre is not fitting in easy, need to push really hard for it to clamp in, leaving scratches on my bike tyres by doing so. Then once it's clamped in, it's too loose to secure the bike.2. Wall fitting is poorly designed. The two mounting screw holes are so close to each other, I mounted this on concrete wall with the provided plug and screw, the plug is too large for the screw that the screw can be pull out directly (not the plug, just the screw pulling out from the plug) when dismounting the bike as the clamp is too tight, and the plug is too big. Even after I used my own plug to screw it tightly to the wall, slight tilt from my bike (13kg bike is not a heavy MTB) is twisting the unit due to the mounting hole being too close and they are banana shaped to allow drill hole inaccuracy, instead they just allow the unit to rotate. And if you are not watching it, your bike can fall and damage your rim and tyres.Will never use anything like this again ever for MTB.

The Clug is really easy to fit. It comes with a guide for screw holes in the wall so you can't get it wrong. It's really easy to clip in and creates a lot of space.Fast shipping too!