Vevor Mophorn Stainless Steel Work Table 36x24 Inch with 4 Wheels, Casters Heavy Duty Food Prep Worktable for Commercial Kitchen Restaurant, Silver

I bought Vevor Stainless Steel Table with Wheels; sized 12 inches wide X 24 inches long X 34 inches high. I don't regret this purchase, but wished that I had purchased sooner. The size is perfect and the table can go anywhere you need a good table. Putting this sturdy table together was a breeze; instructions are very simple to follow (tool is included); all of the parts are well made; super simple to assemble. The table rolls very easy, and wheel locks are a plus. This table is not a push over; top can hold 400 pounds, while the bottom can hold 300 pounds, WOW! I own a tiny home and this Steel Table will be serving as a butcher block, dinning table, helping with washing up dishes, and the table looks Great, so no need to hide or put the table away somewhere. I make this recommendation; you do need some kind of glove in order to put this table together, because of sharp edges which can't be helped, it's metal! I urge Vevor, to include a pair with every purchase of these wonderful rolling stainless steel tables to help with the assembly. Highly recommend buying this product which will out last all other table and still look like new years on down the road......

It's a basic stainless steel cart. Two of the wheels come with breaks. I just bought a nice big spiral mixer and it lives on this cart so I can wheel it around the kitchen and it works well for that.

The rolling cart seems very sturdy, although very lightweight. Assembly was pretty straightforward. Was not missing any parts, actually came with a few extra nuts and bolts. I would have preferred it to have been made with a better quality stainless steel instead of a very thin 20 ga. SUS201 stainless but for the indoor use that I intend I should have no issues with corrosion or rust and the price point at $69 when I purchased it is well worth it. I was a little bit disappointed that the bottom shelf did not have the center support underneath, that I had seen in other VEVOR rolling prep carts, maybe the 24 x 30 cart was not intended to have a center support. Overall, this cart cleans up well, moves very well with the smooth, rolling casters and should serve the purposes for which it was purchased very well! The height of this cart is perfect for the convection oven that I purchased it to use with, as seen in the photo. The condition of the cart appears to be a good quality and I would definitely purchase again.

This is perfect for my use case (light duty work table for glaze area of home pottery studio). I am also short, so the 32” work height is great. There are lots of nooks and crannies after assembly (spacing holes in legs for adjustable shelf, pressure brackets where the bolt goes through the legs to secure the shelf with a nut inside, things like that). I would use it as a coffee, service or packaging station but not as a heavy duty work surface in a food prep context. I can’t speak to the taller version or other sizes. Mine was 24x36x32. Wheels are more robust than expected, which is nice. It went together easily, everything was drilled properly, nuts and bolts fit each other well, one-person assembly. The package was seriously damaged on arrival (as in ripped open across one of the flat sides), but the item inside was well packaged and undamaged.

Good enough for what I need BUT pretty flimsy. The size is perfect for storing a tool and accessories that need a home. A major plus is the quality of the casters which are excellent. The adjustable shelf is handy. The instructions are OK and it goes together in a reasonable amount of time. One part had a nasty burr that I had to deal with before one of the legs would go together. Safety and workmanship are big issues. Workmanship is a bit shoddy and the use of very thin materials makes items like this difficult to make. In terms of safety, many sharp edges on mine with one corner being downright dangerous. I spent about 10 minutes with a file and hammer to deal with the sharp edges. The safety issue is the big concern but can be dealt with. It isn't the most solid and for some uses may not be solid enough for work surface. I wouldn't have this around children due to the sharp edges and being unsteady. With slightly thicker metal and better workmanship this could be much better.

We just bought a gas fired pizza oven. We bought this for the pizza oven on top and the bottle of propane on the bottom shelf. It is heavy duty, quality build, nice finish- no snags. wheels work well but are solid, not flimsy. I can highly recommend this cart.

Bought for my portable dishwasher (was supposed to go on my counter but I eyeballed it/didn't fit). This was the perfect size to fit my dishwasher and some other kitchen gadgets. Very sturdy table on wheels, also has wheel locks. Simple assembly and could adjust the bottom shelf to multiple different heights. The red wheels however did seem to stain the vinyl floor, does slightly come up with scrubbing. Overall very happy with this purchase.

It's a nice sturdy slick looking table, with a few flaws others have pointed out, and a few I noticed as well. As other people have mentioned, there are sharp edges, not the outer edges but most of the under/inner edges are raw edge cuts, I got a bunch of tiny cuts on my fingers holding the lower shelf in place to screw it in, so you may too unless you wear gloves or put tape on the edges or something. The top had a few dents on it, notably 3 of the 4 corners looked like they had hit something. They weren't massive dents, but they were still pretty obvious. The table was packed well with cardboard and thick foam protecting the corners, so as others have said, it probably happened prior to packing. I'm going to use this as a work table in the garage so I'm not too fussed, but if you want a super clean look for a kitchen or something, keep that in mind. The table top rests on the legs, there isn't anything to lock them in place, so it's possible to lift it off the legs if you pick it up to carry it by the top, once it's all together. The top and shelf are covered in a protective film that covers about 75% of the surface and edges. This film is also insanely sticky, and made of the kind of plastic trash bags are made of, so it stretches and tears rather than peeling cleanly. You will probably spend 20-30 minutes just picking at the plastic, to get it all off. You will also discover lots of scuffs underneath the protective film, so...yeah. lol. The casters are really nice beefy industrial casters though, an unexpected plus. They can probably bear way more weight than the table is physically capable of holding. I don't consider the top being a metal laminate over wood to be a bad thing, it makes it a lot more solid than if it was just hollow sheet metal, and more affordable and lighter than if it was much thicker metal. The table this is replacing was hollow and it was like banging on a metal drum depending on what you were doing. This does not have that issue. I get why they do it but I dislike that Vevor puts very visible branding on their furniture, in this case the label was really stuck on with some kind of extra strong adhesive that I'm going to have to use acetone or something to get off, alcohol wasn't cutting it. All that being said, it was cheaper than the other similar options so I think it was worth it. Since I bought it, the price has gone up by about $25 and I feel like it's a lot less of a deal at that price, so I guess keep an eye on sales, put it in your cart and wait for a good price.

Es perfecta, las piezas ensamblan rápidamente, el peso es ligero pero suficientemente estable

excellent (produit simple à monter et solide)

Fàcil de montar i força robust

Ottimo tavolino in acciaio con le ruote che ho usato per il mio ufficio per creare una zona caffé. Facile da montare. Di buona qualità. Buon prezzo.

Bara monterat upp det. Så här långt verkar det bra